최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.27 no.8, 2010년, pp.70 - 75
이상곤 (부산대학교 부산대-IFAM 국제공동연구소) , 김대운 (부산대학교 대학원 정밀기계공학과) , 김병민 (부산대학교 기계공학부) , 정진영 (고려제강 기술개발연구원) , 반덕영 (고려제강 기술개발연구원) , 이선봉 (계명대학교 기계자동차공학과)
The aim of this study is to evaluate the axial residual stress in multi-pass drawn high carbon steel wire by using FE analysis and XRD. When FE analysis is applied to evaluate the residual stress in drawn wire of multi-pass drawing process, obtaining the reliable effective stress-strain curve at hig...
Atienza, J. M., Martinez-Perez, M. L., Ruiz-Hervias, J., Mompean, F. J., Garcia-Hernandez, M. and Elices, M., "Residual Stresses in Cold Drawn Ferrite Rods," Scripta Materialia, Vol. 52, No. 2, pp. 305-309, 2005.
Atienza, J. M., Ruiz-Hervias, J., Martinez-Perez, M. L., Mompean, F. J., Garcia-Hernandez, M. and Elices, M., "Residual Stresses in Cold Drawn Pearlitic Rods," Scripta Materialia, Vol. 52, No. 12, pp. 1223-1228, 2005.
Atienza, J. M. and Elices, M., "Influence of Residual Stress in The Tensile Test of Cold Drawn Wires," Materials and Structures, Vol. 36, No. 8, pp. 548-552, 2003.
Elices, M., Ruiz, J. and Atienza, J. M., "Influence of Residual Stresses on Hydrogen Embrittlement of Cold Drawn Wires," Materials and Structures, Vol. 37, No. 5, pp. 305-310, 2004.
Kuboki, T., Kawakami, I. and Neishi, Y., "A Study on The Influence of Mechanical Properties on The Distribution of Axial Residual Stress after Cold Drawing of Metallic Bars," Materials Science Research International, Vol. 7, No. 1, pp. 41-46, 2001.
Born, M. and Wolf, E., "Principles of Optics 7th Edition," Cambridge University Press, pp. 517-521, 1990.
Ko, D. C., Hwang, W. H., Lee, S. K. and Kim, B. M., "A Study on The Method of Residual Stress Relaxation during Wire Drawing and Evaluation of Residual Stress Using Nano-Indentation Test," Journal of KSPE, Vol. 23, No. 5, pp. 162-169, 2006.
Eom, J. G., Jee, C. W. and Joun, M. S., "Suggestion of a New Constitutive Law for Modeling True Stress- Strain Curves over Large Strain," Proc. of KSME Fall Conference, pp. 13-18, 2006.
Bridgman, P. W., "Studies in Large Flow and Fracture," McGraw-Hill, 1956.
Sevillano, J. G., "Room Temperature Plastic Deformation of Pearlitic Cementite," Materials Science and Engineering, Vol. 21, pp. 221-225, 1975.
Martinez-Perez, M. L., Mompean, F. J., Ruz-Hervias, J., Borlado, C. R., Atienza, J. M., Garcia-Hernandez, M., Elices, M., Gil-Sevillano, J., Peng, R. L. and Buslaps, T., "Residual Stress Profiling in the Ferrite and Cementite Phase of Cold-Drawn Steel Rods by Synchrotron X-ray and Neutron Diffraction," Acta Materialia, Vol. 52, No. 18, pp. 5303-5313, 2004.
Van Acker, M., Root, J., Van Houtte, P. and Aernoudt, E., "Neutron Diffraction Measurement of The Residual Stress in The Cementite and Ferrite Phases of Cold-Drawn Steel Wires," Acta Meterialia, Vol. 44, No. 10, pp. 4039-4049, 1996.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.