최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.20 no.8, 2011년, pp.548 - 554
윤덕중 (포항공과대학교 기계공학과) , 김용기 (POSCO 건설) , 황상무 (포항공과대학교 기계공학과)
A Finite Element (FE)-based model is proposed for predicting the roll force in an edger. The model is developed on the basis of the hypothetical mode of rolling and the least-squares regression analysis from the result of the FE approach. This model reflects the effect of process variables affected ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
사상압연과정은 어떤 과정인가? | 열간압연 공정은 크게 조압연(Roughing mill)과 사상압연(Finishing mill)으로 나눌 수 있다. 사상압연과정은 수평한 두 roll 사이를 통과하여 두꺼운 판을 얇은 판으로 만드는 과정이라 할 수 있다. 그러나, 조압연 과정은 사상 압연과 달리 수직과 수평압연(Vertical-to-Horizontal rolling)이 연속적으로 일어난다. | |
열간압연 공정은 어떻게 나눌 수 있는가? | 열간압연 공정은 크게 조압연(Roughing mill)과 사상압연(Finishing mill)으로 나눌 수 있다. 사상압연과정은 수평한 두 roll 사이를 통과하여 두꺼운 판을 얇은 판으로 만드는 과정이라 할 수 있다. | |
수직압연은 제품의 판 폭을 맞추기 위해 어떻게 하는가? | 수직압연은 판 폭을 줄일 수 있는 방법중 하나이다. 즉 제품의 판 폭을 맞추기 위해 적절한 폭 압연을 하여 최종 목표 폭에 맞출 수 있도록 roll gap 을 제어한다. |
T. Shibahara, Y. Misaka, T. Kono, M. Koriki, H. Takemoto, 1981, Edger Set-up Model at Roughing Train in Hot Strip Mill, J. Iron and Steel Inst. Jpn., Vol. 67, No. 15, pp. 2509-2515.
M. Okado, TAriizumi, Y. Noma, K. Yabuughi, Y. Yamazaki, 1981, Width Behavior of Head and Tail of Slabs at Edge Rolling in Hot Strip Mills, J. Iron and Steel Inst. Jpn., Vol. 67, No. 15, pp. 2516-2525.
S. H. Kim, J. H. Lee, W. J. Kwak, S. M. Hwang, 2005, Dimensional Analysis of Hot Strip Rolling for On-line Prediction of Termo-mechanical Behavior of Roll-strip System, J. Iron and Steel Inst. Jpn., Vol. 45, No. 2, pp. 199-208.
W. J. Kwak, Y. H. Kim, J. H. Lee, S. M. Hwang, 2002, A Precision On-line Model for the Prediction of Roll Power in Hot Strip Rolling, Metall. Mater. Trans. A, Vol. 33, No. 10, pp. 3255-3272.
S. Shida, 1986, Empirical Formula of Flow-stress of Carbon Steels, J. Jpn. Soc. Technol. Plast., Vol.10 , No. 103 (1969-8), pp.610-617.
A. Kirihata, F. Siciliano, T. M. Maccagno, J. J. Jonas, 1998, Mathematical Modeling of Mean Flow Stress During the Hot Strip Rolling of Multiply-alloyed Medium Carbon Steels, J. Iron and Steel Inst. Jpn., Vol. 38, No. 2, pp.187-195.
F. Siciliano, L. L. Leduc K. Hensger, 2005, The Effect of Chemical Composition on the Hot- Deformation Resistance during Processing of Micro Alloyed Steels in Thin Slab Casting/direct Rolling Process, Proc. of Steelsim Conf., Oct. 25- 27, Brno, Czech Republic. pp.469-473.
S. C. Chapra, R. P. Canale, 1988, Numerical Methods for Engineers, McGRAW-HILL, 2nd, p. 330.
S. Xiong, X. Liu, G. Wang, W. Zhang, 1997, Simulation of Vertical-Horizontal Rolling Process during Width Reduction by Full Three-dimensional Rigid-plastic Finite Element Method, ASM Int., Vol. 6, No. 6, pp. 757-765.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.