최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.28 no.3, 2011년, pp.363 - 369
In this study, a direct pattern forming process on a plastic film using ultrasonic vibration energy is investigated. A tool horn containing micro-patterns is attached to an ultrasonic power supply, and is used to press a plastic film with ultrasonic vibration in order to replicate micro-patterns on ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Michaeli, W., Spennemann, A. and Gartner, R., "New plastification concepts for micro injection molding," Microsys. Technol., Vol. 8, No. 1, pp. 55-57, 2002.
Lu, C., Yu, X. and Guo, S., "The mechanism of ultrasonic improvement of weld line strength of injection molded polystyrene and polystyrene/ polyethylene blend parts," J. Polym. Sci.: Part B, Polym. Phys., Vol. 44, No. 10, pp. 1520-1530, 2006.
Saito, T., Kawaguchi, T. and Satoh, I., "Micro molding system for thermoplastic materials using strong ultrasonic wave," Proc. Asian Workshop Polym. Process., pp. 165-166, 2008.
Seah, K. H. W., Wong, Y. S. and Lee, L. C., "Design of tool holders for ultrasonic machining using FEM," J. Mat. Process. Technol., Vol. 37, No. 1-4, pp. 801-816, 1993.
Amin, S. G., Ahmed, M. H. M. and Youssef, H. A., "Computer-aided design of acoustic horns for ultrasonic machining using finite-element analysis," J. Mat. Process. Technol., Vol. 55, No. 3-4, pp. 254-260, 1995.
Park, B. G., Kim, S. C., Moon, H. H., Lee, C. H. and Kang, Y. S., "The polishing characteristics and development of ultrasonic polishing system through horn analysis," Trans. Kor. Soc. Mach. Tool Eng., Vol. 13, No. 3, pp. 53-60, 2004.
Kim, S. R., Lee, J. H. and Yoo, C. D., "Design of cylinder horn for ultrasonic welding," J. Kor. Weld. Join. Soc., Vol. 27, No. 4, pp. 404-410, 2009.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.