최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.20 no.3, 2011년, pp.243 - 249
성중의 (중앙대학교 기계공학부) , 조상흠 (중앙대학교 기계공학부) , 이형직 (POSCO 기술연구소 선재연구그룹) , 이영석 (중앙대학교 기계공학부)
In this study, an approach designed to compute high temperature friction coefficients for SCM 435 steel through a pilot hot rolling test and a finite element analysis, is proposed. Single pass pilot hot flat rolling tests with reduction ratios varying from 20 to 40% were carried out at temperatures ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
C. H. Kim, 1996, Tribology in Hot Rolling, J. Kor. Soc. Tribol. Lubr. Eng., Vol. 12, No. 3, pp. 1-5.
Y. J. Liu, A.K. Tieu, D. D. Wang, W.Y.D. Yuen, 2001, Friction measurement in cold rolling, J. Mater. Process. Technol., Vol. 111, pp. 142-145.
J. Jeswiet, 1998, A comparison of friction coefficient in cold rolling, J. Mater. Process. Technol., pp. 239-244.
H. Ford, Advanced Mechanics of Materials, Longmans, Green and Co., London, 1963.
UNDERWOOD, L. R., 1952, The rolling of Metals, Vol. 1.
B. Hum, H. W. Colquhoun, J. G. Lenard, 1996, Measurements of friction during hot rolling of aluminum strip, J. Mater. Process. Technol., Vol. 60, pp. 331-338.
K. H. Jung, H. W. Lee, Y. T. Im, 2009, Numerical prediction of austenite grain size in a bar rolling process using an evolution model based on a hot compression test, J. Mater. Sci. Eng., Vol. A519, pp. 94-104.
L. M. Galantucci, L. Tricarico, 1999, Thermomechanical simulation of a rolling process with an FEM approach, J. Mater. Process. Technol., pp. 494-501.
J. G. Lenard, 1991, The effect of temperature on the coefficient of friction in flat rolling, CIRP Ann. Manuf. Technol. , Vol. 40(1) , pp. 223-226.
Wusatoski, 1960, Fundamentals of Rolling, Oxford University Press. London.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.