최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of mechanical science and technology, v.25 no.5, 2011년, pp.1185 - 1192
Ko, Hee-Young (Graduate School of Mechanical Engineering, Hanbat National University) , Shin, Kwang-Bok (Division of Mechanical Engineering, Hanbat National University) , Hahn, Sung-Ho (Advanced Materials Tilting Train System Research Corps., Korea Railroad Research Institute)
In this study, a standardized finite element model for the carbody structures of various railway vehicles made of sandwich composites was suggested. The standardized finite element model for composite carbody structures was introduced and proposed by comparing the results of real structural tests un...
S. Y. Chung, S. J. An and P. J. Kim, An analysis on the railway vehicle system for the introduction of new transit systems, Spring Conference of The Korean Society for Railway (2009) 284-290.
Composite Part B: Engineering K. Lmielinska 39 1034 2008 10.1016/j.compositesb.2007.11.007 K. Lmielinska, L. Guillaumat, R. Wojtyra and M. Castaings, Effects of manufacturing and face/core bonding on impact damage in glass/polyester-PVC foam core sandwich panels, Composite Part B: Engineering, 39 (2008) 1034-1041.
Composite Structures A. Zinno 92 9 2208 2010 10.1016/j.compstruct.2009.08.044 A. Zinno, E. Fusco, A. Prota and G. Manfredi, Multi-scale approach for the design of composite sandwich structures for train application, Composite Structures, 92(9) (2010), 2208-2219.
D. Zenkert 1995 An Introduction to Sandwich Construction D. Zenkert, An Introduction to Sandwich Construction, Solihull, UK: EMAS Ltd. (1995).
Journal of Mechanical Science and Technology H. Y. Ko 23 10 2689 2009 H. Y. Ko, K. B. Shin, K. W. Jeon and S. H. Cho, A study on the crashworthiness and rollover characteristics of low-floor bus made of sandwich composite, Journal of Mechanical Science and Technology, 23(10) (2009) 2689-2693.
The Korean Society for Railway H. Y. Ko 12 4 518 2009 H. Y. Ko, K. B. Shin and J. C. Jeong, A study on the comparison of structural performance test and analysis for design verification of bimodal tram vehicle made of sandwich composites, The Korean Society for Railway, 12(4) (2009) 518-525.
C. D. Jang, H. C. Song and Y. S. Ha, A development of optimal structure design systems for light weight of railway vehicle, Korea Railroad Research Institute (2002).
S. C. Yoon, C. S. Jeon, W. K. Kim and M. Y. Kim, An evaluation of structural strength by testing the carbody of light composite material, Spring Conference of the Korean Society for Precision Engineering (2006) 393-394.
Composite Structures R. S. Thomson 50 331 2000 10.1016/S0263-8223(00)00111-2 R. S. Thomson and M. L. Scott, Experience with the finite element modeling of a full-scale test of a composite aircraft control surface, Composite Structures, 50 (2000) 331-345.
Composite Structures L. U. Hansen 86 104 2008 10.1016/j.compstruc.2007.05.021 L. U. Hansen and P. Horst, Multilevel optimization in aircraft structural design evaluation, Composite Structures, 86 (2008) 104-118.
J. H. Choi and C. O. Moon, Finite element modeling for structural analysis of supersonic aircraft, Autumn Conference of The Korean Society for Aeronautical & Space Sciences (2002) 357-361.
Composite Structures J. S. Kim 81 168 2007 10.1016/j.compstruct.2006.08.007 J. S. Kim, J. C. Jeong and S. J. Lee, Numerical and experimental studies on the deformational behavior a composite train carbody of the korean tilting train, Composite Structures, 81 (2007) 168-175.
Composite Structures R. Tanov 76 338 2006 10.1016/j.compstruct.2005.05.007 R. Tanov and A. Tabiei, Adding transverse normal stresses to layered shell finite elements for the analysis of composite structures, Composite Structures, 76 (2006) 338-344.
The Korean Society for Composite Materials J. Y. Lee 20 4 42 2007 J. Y. Lee, K. B. Shin and J. C. Jeong, Simulation of low velocity impact of honeycomb sandwich composite panels for the BIMODAL tram application, The Korean Society for Composite Materials, 20(4) (2007) 42-50.
J. H. Yoon, About beam element, ANSYS Magazine for Korean users, TSNE Ltd. (2006).
Japanese Industrial Standard (JIS) E 7105, Test Methods for Static Load of Body Structures of Railway Rolling Stock (1994).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.