최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國鋼構造學會 論文集 = Journal of Korean Society of Steel Construction, v.23 no.6 = no.115, 2011년, pp.647 - 657
서건호 (영남대학교 건설환경공학과) , 서상정 (영남대학교 건설환경공학과) , 권영봉 (영남대학교 건설환경공학과)
This paper describes the moment capacity of flexural members with local buckling based on a series of FE and experiment results. Thin-walled flexural members undergo local, lateral-torsional, or interactive buckling according to the section geometries and lateral boundary conditions. Flexural member...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
플랜지의 국부좌굴 및 후좌굴강도를 단면 강도 산정 시 고려하기 위해 무엇을 하는가? | 플랜지와 복부의 국부좌굴이 휨부재의 모멘트강도에 미치는 영향은 Basler(1963)에 의하여 연구되어 복부의 휨좌 굴에 의한 감소계수를 적용하는 형식으로 AISC LRFD Specifications(1986)에서 부터 반영하여 오고 있다. 플랜지의 국부좌굴 및 후좌굴강도를 단면강도 산정 시 고려하기 위해 현재 AISC규준(2005)은 플랜지의 복부의 국부좌굴강도와 횡-비틀림좌굴강도 중에서 최소값을 휨강도로 산정하고 있다. 한편세장한 복부의 휨좌굴 효과와 휨모멘트에 대한 저항력의 감소를 고려하기 위하여 감소계수 RPG를 적용하고 있다. | |
휨부재는 단면조건 및 횡 방향 경계조건에 따라 무엇이 발생하는가? | 본 논문에는 국부좌굴이 발생하는 휨부재의 유한요소해석 및 실험에 근거한 단면의 휨강도에 대하여 기술하였다. 박판으로 구성된 휨부재는 단면조건 및 횡방향 경계조건에 따라서 국부좌굴, 횡-비틀림좌굴 및 두 좌굴의 혼합좌굴이 발생하게 된다. 플랜지나 복부의 폭-두 께비가 큰 경우 횡-비틀림좌굴 발생 이전에 국부좌굴이 발생하며, 국부좌굴은 휨부재의 횡-비틀림좌굴강도에 영향을 미치게 된다. |
국토해양부(2010) 도로교설계기준.
권영봉(2000) Buckling Analysis Program(BAP) 사용자 메뉴얼, 영남대학교.
서건호, 권영봉(2011) H-형강 휨부재의 실험 보고서, 영남대학교 방재연구소.
AASHTO (2007) LRFD Bridge Design Specifications, American Association of State Highway Transportation Officials, Washington, DC, USA.
AISC (1986) LRFD Specification for Structural Steel Buildings, American Institute of Steel Construction, Washington, DC, USA.
AISC (2005) Specification for Structural Steel Buildings, American Institute of Steel Construction, Washington, DC, USA.
AISI (2004) North American Specifications for the Design of Cold-Formed Steel Structural Members, American Iron and Steel Institute, Supplement No. 1. Washington, DC, USA.
Basler, K. (1963) Strength of Plate Girders in Bending, Trans. ASCE, Vol. 128, Part II, pp.655-686.
Bryan, G.H. (1891) On the Stability of a Plane Plate under Thrusts in Its Own Plane with Application to Buckling of the Sides of a Ship, Proc., London Math. Vol. 22.
European Committee for Standardisation (2003) Eurocode 3-Part 1.1: Design of Steel Structures-General rules and rules for buildings, Brussels, Belgium.
European Committee for Standardisation (2006) Eurocode 3-Part 1.5 : Design of Steel Structures-Plated steel elements, Brussels, Belgium.
Hancock, G.J., Murray T.M., and Ellifritt D.S. (2004) Cold-Formed Steel Structures to the AISI Specification, Marcel Dekker Inc.
FEA Co., Ltd. (2009) Lusas Element Reference Manual & User's Manual (version 14.3-1).
Kemp, A.R. (1996) Inelastic lateral and local buckling in design codes, Journal of Structural Engineering, ASCE, Vol. 122, No. 4, pp.374-482.
Kwon, Y.B., Kim, N.G., and Hancock, G.J. (2007) Compression tests of welded section columns undergoing buckling interaction, Journal of Constructional Steel Research, Vol. 63, pp.1590-1602.
Schafer, B.W. and Pekoz, T. (2003) Direct Strength Prediction of ColdFormed Steel Members using Numerical Elastic Buckling Solutions, ThinWalled Structures, Elsevier.
Standards Australia (2005) ColdFormed Steel Structures AS/NZS 4600, Sydney, Australia.
Topkaya, C. and Sahin, S. (2011) A Comparative study of AISC and EC3 strength limit states, International. Journal of Steel Structures, Vol. 11, No.1, pp.13-27.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.