최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기복합재료 : 한국복합재료학회지 = Journal of the Korean Society for Composite Materials, v.24 no.4, 2011년, pp.41 - 47
윤지용 (현대자동차) , 김상우 (현대자동차) , 박봉현 (현대자동차) , 이성훈 (현대자동차) , 권태헌 (포항공과대학교, 기계공학과) , 김기태 (포항공과대학교, 기계공학과)
This paper deals with anisotropic property and structural analysis for short fiber reinforced plastic composites manufactured by the injection molding process. The common approach for modeling this type of material is the consideration of the material as homogenous and isotropic. However, the common...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
G. B. Jeffery, "The motion of ellipsoidal particles immersed in a viscous fluid", Proc. R. Soc. London, Ser. A 102, 1922, pp. 161-179.
F. Folgar and C. L. Tucker III, "Orientation behavior of fibers in concentrated suspensions" J. Reinf. Plast. Compos. 3, 1984, pp. 98-119.
S. G. Advani and C. L. Tucker III, "The use of tensors to describe and predict fiber orientation in short fiber composites", J. Rheol. 8, 1987, pp. 751-784.
C. L. Tucker III, "Flow regimes for fiber suspensions in narrow gaps", J. Non-Newtonian Fluid Mech. 39, 1991, pp. 239-269.
고진, 이석원, 윤재륜, "단섬유 복합재료의 사출 성형을 위한 평면방향의 섬유 배열 해석", 한국복합재료학회지, 제8권 제4호, 1995, pp. 34-45.
S. T. Chung and T. H. Kwon, "Numerical simulation of fiber orientation in injection molding of short-fiber-reinforced thermoplastics", Polym. Eng. Sci. 35, 1995, pp. 604-618
R. M. Jones, ''Mechanics of composite materials", McGraw-Hill, 1975.
J. C. Halpin and S. W. Tsai, "'Effects of environmental factors on composite materials", AFML-TR-67-, 1969.
강명석, 윤성기, "단섬유 복합재료의 거동에 대한 확률 유한 요소 해석", 한국복합재료학회지, 제6권 제2호 1993, pp. 80-86.
MPI 5.0. Moldflow corporation. Framingham, MA, USA.
Abaqus v6.5,User's Manual. Abaqus Inc., Providence, RI, USA.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.