최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.24 no.12, 2012년, pp.867 - 874
최종락 (서강대학교 기계공학과) , 허남건 (서강대학교 기계공학과) , 김동철 (서강대학교 기계공학과) , 김희수 (기아자동차 도장생기팀)
In the present study, three-dimensional transient numerical simulations were carried out to improve the performance of a vehicle paint drying process. In order to describe the movement of a vehicle, the techniques of moving boundary condition and multiple reference flames (MRF) were used. For the va...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
일반적으로 차량 도장 공정은 어떠한 순으로 이루어지는가? | 이러한 생산 공정 중 차량 도장 공정은 제품의 미관을 높이고 기계적·화학적 성질을 개선시키는 매우 중요한 공정이다. 일반적으로 차량 도장 공정은 주로 전착 도장 공정(electro deposition process)과 스프레이 도장 공정(spray painting process), 도장 건조 공정(paint drying process) 순으로 이루어진다. 이중 도장 건조 공정은 전착 도장 공정 및 스프레이 도장 공정에서 입혀진 도료를 차량 표면에 정착시키기 위한 공정으로, 건조가 제대로 되지 않는 경우 전체 공정의 불량을 초래 할 수 있다. | |
도장 건조 공정은 어떠한 공정인가? | 일반적으로 차량 도장 공정은 주로 전착 도장 공정(electro deposition process)과 스프레이 도장 공정(spray painting process), 도장 건조 공정(paint drying process) 순으로 이루어진다. 이중 도장 건조 공정은 전착 도장 공정 및 스프레이 도장 공정에서 입혀진 도료를 차량 표면에 정착시키기 위한 공정으로, 건조가 제대로 되지 않는 경우 전체 공정의 불량을 초래 할 수 있다. 또한 건조 공정의 불량은 후속 공정에 문제를 야기하거나, 외관 및 차량의 내구성 저하로 연결되기 때문에 생산성 및 생산 비용은 물론 생산 품질에 직접적인 영향을 끼치게 된다. | |
생산성 향상 및 공정 개선을 위해 건조 공정에 대한 분석이 필요한 배경은 무엇인가? | 일반적으로 차량 도장 공정은 주로 전착 도장 공정(electro deposition process)과 스프레이 도장 공정(spray painting process), 도장 건조 공정(paint drying process) 순으로 이루어진다. 이중 도장 건조 공정은 전착 도장 공정 및 스프레이 도장 공정에서 입혀진 도료를 차량 표면에 정착시키기 위한 공정으로, 건조가 제대로 되지 않는 경우 전체 공정의 불량을 초래 할 수 있다. 또한 건조 공정의 불량은 후속 공정에 문제를 야기하거나, 외관 및 차량의 내구성 저하로 연결되기 때문에 생산성 및 생산 비용은 물론 생산 품질에 직접적인 영향을 끼치게 된다. 이러한 이유로 생산성 향상 및 공정 개선을 위해 건조 공정에 대한 분석이 반드시 필요하다. |
Dhib, R., 2007, Infrared drying:from process modeling to advanced process control, Drying Technology, Vol. 25, No. 1, pp. 97-105.
Dufour, P., Blance, D., Toure, Y., and Laurent, P., 2004, Infrared drying process of an experimental water painting model predictive control, Drying Technology, Vol. 22, No. 1/2, pp. 269-284.
Blanc, D., Laurent, P., Gerard, J. F., and Andrieu, J., 1997, Experimental infrared drying study of a model water-based epoxy-amine painting coated on iron support, Drying technology, Vol. 15, No. 6/8, pp. 1787-1799.
Parrout, J. M., Dostie, M., Navarri, P., Andrieu, J., and Mujumdar, A. S., 1997, Heat and mass transfer relationship in combined infrared and convective drying, Drying Technology, Vol. 15, No. 2, pp. 399-425.
Choi, C. J., Jang J. H., Kim, C., and Kim, M. Y., 2010, Numerical investigation of the effect of IR heating on drying mechanism in a tumble dryer, Transactions of the KSME B, Vol. 34, No. 3, pp. 219-228.
Hong, S.-C., Lee, J. H. and Jung, G. Y., 2009, A study on the drying characteristics of conductive ink by oven drying system and the hot-air system, International Conference on Air-Conditioning and Refrigeration Engineers of Korea, pp. 1429-1434.
Shin, K. H., Jang, Y. S., Kim, S. Y., and Jung, P. S., 1998, The characteristics of the hot air drying of sizing yarn with heat and mass transfer, The Society of Air-Conditioning and Refrigerating Engineers if Korea, Summer Annual Conference, pp. 27-32.
Chun, W.-P., Lee, K.-W., Park, K,-H., Lee, K.-J., and Kim, H., 2001, Influence of thermal efficiency on operating condition chang in hot air dryer, The Society of Air-Conditioning and Refrigerating Engineers if Korea, Summer Annual Conference, pp. 1511-1516.
Avci, A. and Can, M., 1999, The analysis of the drying process on unsteady forced convection in thin film of ink, Applied Thermal Engineering, Vol. 19, No. 6, pp. 641-657.
Park, J. T., Hur, N., Choi, B. K., and Ahn, B. J., 2006, Development of a semi-microscopic numerical analysis method for an automotive heat exchanger, Proceedings of The Fourth National Congress on Fluids Engineering, pp. 983-986.
Lee, S. J., Choi, J., Hur, N., and Kim, H., 2011, A Numerical study for improving performance on paint drying system of a vehicle, Journal of Korea Society for Computational Fluid Engineering, Vol. 16, No. 2, pp. 75-80.
CD-adapco group, 2008, STAR-CD Methodology, V412.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.