내압구조물의 구조적 성능에 영향을 주는 주요 요소로 형상, 쉘 두께, 보강재 배치 안 그리고 제작 재료 등을 나열할 수 있다. 전통적인 이론적 방법론에 근거한 내압구조물의 설계는 신속하며 만족할 만한 결과를 제공하지만 이는 일부 특정한 형상, 쉘 두께 및 제작 재료 등에 제한되어 있다. 본 논문에서는 최적화된 형상, 쉘 두께, 보강재 배치 안 그리고 복합재료 적층 정보 등을 얻을 수 있는 최적설계 기법에 근거한 진보된 대체 방법론을 다루고 있다. CAE 기반의 최적설계 기법을 활용하여 내압구조물 설계에 요구되는 구조적 성능과 최적화된 설계 인자들을 얻었다. 상용화된 유한요소 프로그램임 ANSYS의 CAE 플랫폼으로부터 메타모델 기반 최적화 기법을 수행하여 원통형 내압구조물의 설계를 위한 최적의 타원형 형상을 결정하였다. 또한 최적설계 프로그램인 OptiStruct의 기울기 기반 최적설계 방법을 이용하여 복합재료 기반 내압구조물의 설계시 최적의 적층순서와 쉘 두께가 얇은 내압구조물에 대한 최적의 보강재 배치 안을 각각 도출하였다. 최적설계 예제를 통해 본 논문에서 제시하고 있는 최적설계 기법에 근거한 방법론이 내압구조물의 설계에 효과적임을 확인할 수 있었다.
내압구조물의 구조적 성능에 영향을 주는 주요 요소로 형상, 쉘 두께, 보강재 배치 안 그리고 제작 재료 등을 나열할 수 있다. 전통적인 이론적 방법론에 근거한 내압구조물의 설계는 신속하며 만족할 만한 결과를 제공하지만 이는 일부 특정한 형상, 쉘 두께 및 제작 재료 등에 제한되어 있다. 본 논문에서는 최적화된 형상, 쉘 두께, 보강재 배치 안 그리고 복합재료 적층 정보 등을 얻을 수 있는 최적설계 기법에 근거한 진보된 대체 방법론을 다루고 있다. CAE 기반의 최적설계 기법을 활용하여 내압구조물 설계에 요구되는 구조적 성능과 최적화된 설계 인자들을 얻었다. 상용화된 유한요소 프로그램임 ANSYS의 CAE 플랫폼으로부터 메타모델 기반 최적화 기법을 수행하여 원통형 내압구조물의 설계를 위한 최적의 타원형 형상을 결정하였다. 또한 최적설계 프로그램인 OptiStruct의 기울기 기반 최적설계 방법을 이용하여 복합재료 기반 내압구조물의 설계시 최적의 적층순서와 쉘 두께가 얇은 내압구조물에 대한 최적의 보강재 배치 안을 각각 도출하였다. 최적설계 예제를 통해 본 논문에서 제시하고 있는 최적설계 기법에 근거한 방법론이 내압구조물의 설계에 효과적임을 확인할 수 있었다.
Geometric configurations such as hull shape, wall thickness, stiffener layout, and type of construction materials are the key factors influencing the structural performance of pressure hulls. Traditional theoretical approach provides quick and acceptable solutions for the design of pressure hulls wi...
Geometric configurations such as hull shape, wall thickness, stiffener layout, and type of construction materials are the key factors influencing the structural performance of pressure hulls. Traditional theoretical approach provides quick and acceptable solutions for the design of pressure hulls within specific geometric configuration and material. In this paper, alternative approaches that can be used to obtain optimal geometric shape, wall thickness, construction material configuration and stiffener layout of a pressure hull are presented. CAE(Computer Aided Engineering) based design optimization tools are utilized in order to obtain the required structural responses and optimal design parameters. Optimal elliptical meridional profile is determined for a cylindrical pressure hull design using metamodel-based optimization technique implemented in a fully-integrated parametric modeler-CAE platform in ANSYS. While the optimal composite laminate layup and the design of ring stiffener for a thin-walled pressure hull are obtained using gradient-based optimization method in OptiStruct. It is noted that the proposed alternative approaches are potentially effective for pressure hull design.
Geometric configurations such as hull shape, wall thickness, stiffener layout, and type of construction materials are the key factors influencing the structural performance of pressure hulls. Traditional theoretical approach provides quick and acceptable solutions for the design of pressure hulls within specific geometric configuration and material. In this paper, alternative approaches that can be used to obtain optimal geometric shape, wall thickness, construction material configuration and stiffener layout of a pressure hull are presented. CAE(Computer Aided Engineering) based design optimization tools are utilized in order to obtain the required structural responses and optimal design parameters. Optimal elliptical meridional profile is determined for a cylindrical pressure hull design using metamodel-based optimization technique implemented in a fully-integrated parametric modeler-CAE platform in ANSYS. While the optimal composite laminate layup and the design of ring stiffener for a thin-walled pressure hull are obtained using gradient-based optimization method in OptiStruct. It is noted that the proposed alternative approaches are potentially effective for pressure hull design.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
In this study, the simultaneous consideration of ply thickness, t and angle of orientation Θ for a straight cylindrical pressure hull (see Fig. 7) during design optimization process is proposed.
2 and it is adopted as reference design. The reason for this is to establish a reliable comparison of the optimal design results obtained using the proposed approach against published results. The rated operating pressure of the reference pressure hull is 600-bar or a dive depth of approximately 6,000m underwater.
대상 데이터
To promote better interpretation of the optimal topology while taking advantage of symmetry, a half geometry model is considered. This model has the inner diameter of 100mm, the length of 400mm, the total thickness of 10mm, the base thickness of 3 mm and the stiffener net thickness of 7mm, respectively. Fig.
이론/모형
These approaches underscore the use of CAE based design optimization tools. Optimal elliptical meridional profile is determined for a cylindrical pressure hull design using metamodel-based optimization technique implemented in a fully integrated parametric modelerCAE platform in ANSYS. While conceptual design of ring stiffener layout of a thin-walled pressure hull is obtained using gradient-based optimization method in OptiStruct.
4) in this study is the possibility of obtaining global optimal design solution. To allow such possibility, Kriging method which is known for its ability to build accurate global approximation of the design space(Simpson et al., 2001) is used to build the metamodel. Moreover, the multi-objective genetic algorithm(MOGA) which is an optimization method that can obtain optimal solution is also used.
, 2010). While the structural topology of fixed-section stiffeners for thin-walled marine structures can be efficiently designed using other methods such as the sequential quadratic programming(Jeong, 2010), in this work, the optimal layout of ring stiffeners for a thin-walled pressure hull is obtained using topology optimization method available in OptiStruct. The method practically enables more freedom for stiffener layout in contrast to conventional approach which often utilizes fixed structural form.
성능/효과
As stated in the optimization problem in Eq. (3), although the optimal design has the same internal volume and buckling pressure as the reference design, the optimal bowed-out pressure hull weighs over 6% lighter than the reference design with a small trade off(3.6% increase) for maximum von Mises stress. The results are summarized in Table 2.
참고문헌 (20)
ANSYS Academic Research, Release 12.1.
Bagheri, M., Jafari, A., Sadeghifar, M. (2011) Multi-Objective Optimization of Ring Stiffened Cylindrical Shells using a Genetic Algorithm, Journal of Sound and Vibration, 330, pp.374-384.
Barski, M., Kruzelecki, J. (2005) Optimal Design of Shells Against Buckling under Overall Bending and External Pressure, Thin-Walled Structures, 43, pp.1677-1698.
Cagdas, I., Adali, S. (2011) Buckling of Cross-Ply Cylinders under Hydrostatic Pressure Considering Pressure Stiffness, Ocean Engineering, 38, pp.559 -569.
Cartie, D., Davies, P., Peleau, M., Partridge, I. (2006) The Influence of Hydrostatic Pressure on the Interlaminar Fracture Toughness of Carbon/ Epoxy Composites, Composites: Part B, pp.292- 300.
Jang, G.W., Yoon, M.S., Park, J.H. (2010) Lightweight Flatbed Trailer Design by using Topology and Thickness Optimization, Structural and Multidisciplinary Optimization, 41, pp.295-307.
Jeong, H.K. (2010) Comparative Study of Metallic and Non-Metallic Stiffened Plates in Marine Structures, Journal of the Computational Structural Engineering, 23, pp.715 -726.
Joung, T.-H., Lee, J.-H., Nho, I.-S., Lee, C.-M., Lee, P.-M., Aoki, T., Hyakudome, T. (2008) A Study on the Pressure Vessel Design, Structural Analysis and Pressure Test of a 6000m Depth- Rated Unmanned Underwater Vehicle, Ships and Offshore Structures, 3, pp.205-214.
Kim, M.G., Kim, J.H., Cho, S. (2010) Topology Design Optimization of Heat Conduction Problems using Adjoint Sensitivity Analysis Method, Journal of the Computational Structural Engineering, 23, pp.683-691.
Lee, G., Park, J., Choi, D.-H. (2012) Shape Optimization of Mobile Phone Folder Module for Structural Strength, Journal of Mechanical Science and Technology, 26, pp.509-515.
Moon, C., Kim, I., Choi, B., Kweon, J., Choi, J. (2010) Buckling of Filament-Wound Composite Cylinders Subjected to Hydrostatic Pressure for Underwater Vehicle Applications, Composite Structures, 92, pp.2241-2251.
Young, W.C., Budynas, R.G. (2002) Roark's Formulas for Stress and Strain, Seventh ed, McGraw-Hill, New York.
Zhou, M. (2004) Topology Optimization for Shell Structures with Linear Buckling Responses, Computational Mechanics, WCCM VI, Tsinghua University Press & Springer Verlag, Beijing, China.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.