광학 이성질체인 PLLA와 PDLA를 전 조성에서 블렌드하여 PLA stereocomplex(SC)를 제조하였고 DSC를 통해 PLLA matrix안의 SC결정 형성 정도를 파악하였다. 결과적으로 PLA SC blend의 PDLA 함량이 SC 결정 생성 정도에 영향을 주며 PLLA/PDLA=50/50의 조성일 때 가장 많은 SC 결정이 생성되었다. 더 나아가 고유의 낮은 충격강도를 보강하기 위하여 PLLA/PDLA=92/8, 85/15 조성에서 충격보강제(Impact modifiers)를 도입하였다. 제조된 PLA SC/Impact modifiers의 열적기계적 성질은 DSC, HDT, Izod Impact tester, UTM을 통해 측정하였다. DSC 측정 결과 PLA SC 결정은 Strong120(Impact modifier)가 10-20wt% 도입되면 감소하는 경향을 보이나 반면에 Elvaloy가 도입될 때에는 아무런 영향을 주지 않는 것으로 관찰되었다. HDT의 값은 PDLA의 도입에 따라 급격하게 $100^{\circ}C$이상으로 증가하였다. 하지만 Strong120과 Elvaloy가 도입됨에 따라 감소하는 경향을 보였다. 결국 Toughening된 PLA SC에서 10wt%의 Impact modifier를 blend하여 가장 최적의 충격강도와 굴곡탄성율을 갖는 물성을 발견할 수 있었다.
광학 이성질체인 PLLA와 PDLA를 전 조성에서 블렌드하여 PLA stereocomplex(SC)를 제조하였고 DSC를 통해 PLLA matrix안의 SC결정 형성 정도를 파악하였다. 결과적으로 PLA SC blend의 PDLA 함량이 SC 결정 생성 정도에 영향을 주며 PLLA/PDLA=50/50의 조성일 때 가장 많은 SC 결정이 생성되었다. 더 나아가 고유의 낮은 충격강도를 보강하기 위하여 PLLA/PDLA=92/8, 85/15 조성에서 충격보강제(Impact modifiers)를 도입하였다. 제조된 PLA SC/Impact modifiers의 열적기계적 성질은 DSC, HDT, Izod Impact tester, UTM을 통해 측정하였다. DSC 측정 결과 PLA SC 결정은 Strong120(Impact modifier)가 10-20wt% 도입되면 감소하는 경향을 보이나 반면에 Elvaloy가 도입될 때에는 아무런 영향을 주지 않는 것으로 관찰되었다. HDT의 값은 PDLA의 도입에 따라 급격하게 $100^{\circ}C$이상으로 증가하였다. 하지만 Strong120과 Elvaloy가 도입됨에 따라 감소하는 경향을 보였다. 결국 Toughening된 PLA SC에서 10wt%의 Impact modifier를 blend하여 가장 최적의 충격강도와 굴곡탄성율을 갖는 물성을 발견할 수 있었다.
We tried to blend PLLA and PDLA at overall compositions to form PLA stereocomplexes (SC). The presence of the SC crystalline phase in the PLLA matrix was verified by differential scanning calorimetry (DSC). As a result, a various PDLA composition of the PLA SC blends can influence PLA SC formation. ...
We tried to blend PLLA and PDLA at overall compositions to form PLA stereocomplexes (SC). The presence of the SC crystalline phase in the PLLA matrix was verified by differential scanning calorimetry (DSC). As a result, a various PDLA composition of the PLA SC blends can influence PLA SC formation. And the largest amount of PLA SC crystallites was formed when PLLA/PDLA ratio is 50/50. In addition, we have tried to do PLA SC toughening with two impact modifiers in 92/8, 85/15 ratio of PLLA/PDLA to enhance the mechanical properties such as impact strength. Thermal and mechanical properties of PLA SC were investigated by DSC, HDT, Izod impact tester and UTM. PLA SC formation decreased when 10-20 wt% of Strong120 (impact modifier) was added. On the other hand, there is no effect on PLA SC formation when 10-20% of Elvaloy (impact modifier) was added. HDT values dramatically increased over $100^{\circ}C$ with the addition of PDLA. However, HDT decreased as Strong120 and Elvaloy content increased. Finally, we could find well balanced composition of toughened PLA SC with 10wt% of impact modifier in flexural modulus and impact strength.
We tried to blend PLLA and PDLA at overall compositions to form PLA stereocomplexes (SC). The presence of the SC crystalline phase in the PLLA matrix was verified by differential scanning calorimetry (DSC). As a result, a various PDLA composition of the PLA SC blends can influence PLA SC formation. And the largest amount of PLA SC crystallites was formed when PLLA/PDLA ratio is 50/50. In addition, we have tried to do PLA SC toughening with two impact modifiers in 92/8, 85/15 ratio of PLLA/PDLA to enhance the mechanical properties such as impact strength. Thermal and mechanical properties of PLA SC were investigated by DSC, HDT, Izod impact tester and UTM. PLA SC formation decreased when 10-20 wt% of Strong120 (impact modifier) was added. On the other hand, there is no effect on PLA SC formation when 10-20% of Elvaloy (impact modifier) was added. HDT values dramatically increased over $100^{\circ}C$ with the addition of PDLA. However, HDT decreased as Strong120 and Elvaloy content increased. Finally, we could find well balanced composition of toughened PLA SC with 10wt% of impact modifier in flexural modulus and impact strength.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
제안 방법
Flexural and impact tests were carried out according to ASTM D790 and ASTM D256 (notched, 3.2mm). Tests for flexural modulus and flexural strength were performed using UTM (Tinius Olsen, H5KT).
In this study, we blended PLLA and PDLA with 10-20wt% impact modifier to enhance mechanical property and thermal property with overall compositions. DSC data illustrate that diversity of PDLA composition in the PLA SC blends can affect PLA SC formation.
In this study, we could prepared PLLA composites with various amount of PDLA. Various PDLA volumes are blended with PLLA and stereocomplex crystallites were produced in the PLLA matrix.
3mm/min. The impact strength test was analyzed by Izod impact strength tester (Sejin, SJTM-131) in room temperature.
이론/모형
They were arefully molded by a compression molding machine. HDT test was carried out according to ASTM D648. A load (0.
참고문헌 (17)
K. Madhavan Nampoothiri, et al., "An overview of the recent developments in polylactide (PLA) research", Bioresource Technology, 101, pp.8493-8501, 2010.
B. Y. shin, et al., "Effects of Irradiation of Electron Beam on the Rheological Properties of PLA and Chemically Modified PLA", Polymer(Korea), 31, 3, pp.269-272, 2007.
M. B. Coltelli, et al., "The effect of free radical reactions on structure and properties of PLA based blends", Polymer Degradation and Stability, 95, pp.332-341, 2010.
J. Zhang, et al., "Difference in the $CH_3$ …OC interactions among poly(L-lactide), poly(L-lactide)/ poly(D-lactide) stereocomplex, and poly(3-hydroxybutyrate) studied by infrared spectroscopy", Journal of Molecular Structure, 735-736, pp.249-257, 2005.
K. Fukushima, et al., "Enhanced Stereocomplex Formation of Poly(L-lactide) in the Presence of Stereoblock Poly(lacticacid)", Macromolecular bioscience, 7, pp.829-835, 2007.
H. Tsuji. "In vitro hydrolysis of blends from enantiomeric poly(lactide)s. Part 4 :well-homo-crystallized blend and nonblended films", Biomaterials, 24, pp.537-547, 2003.
S. Li, et al., "Synthesis, Characterization, and Stereocomplex induced Gelation of Block Copolymers Prepared by Ring-opening Polymerization of L(D)-Lactide in the presence of Poly(ethylene glycol)", Macromolecules, 36, pp.8008-8014, 2003.
K. Vahik, et al., "Crystallization Behavior of Poly (L-lactic acid) Nanocomposites: Nucleation and Growth Probed by Infrared Spectroscopy", Macromolecules, 38, pp.6520-6527, 2005.
H. Tsuji, et al, "Stereocomplex formation between enantiomeric poly(lactic acid)s. XI. mechanical properties and morphology of solution-cast films", Polymer, 40, pp.6699-6708, 1999.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.