최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.29 no.2, 2012년, pp.208 - 213
황영은 (금오공과대학교 기계공학과) , 윤성호 (금오공과대학교 기계공학과)
In this study, the mechanical joint performance of the V-Insert clamp applied to automobile exhaust pipes was evaluated through the experimental investigation of its axial load capacity. The axial load of the V-Insert clamp was also determined by using theoretical equations presented by Shoghi and c...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
V-Insert 클램프의 장점은 무엇인가? | V-Insert 클램프는 원형 단면을 가진 서로 다른 소재나 동일 소재를 서로 체결할 경우 쉽게 탈거하거나 부착할 수 있다는 장점으로 인해 항공우주 및 자동차 산업 등에 이용된다. 최근에는 국내 차량의 배기가스저감장치를 구성하는 부품들을 서로 체결하기 위한 용도로 활용하기 위해 연구가 진행되고 있다. | |
V-Insert 클램프의 z-방향의 하중은 어떤 요소인가? | 이러한 반경 방향의 하중은 배기관에 대해 쐐기 작용을 일으켜 z-방향의 하중을 발생시킨다. 이러한 z-방향의 하중은 V-Insert 클램프의 축방향 하중이며 배기관 간의 체결 및 기밀성을 유지시키는 요소이다. |
Mountford, R., "Design of Clamp Joints," Engineering Designer, pp. 37-40, 1980.
Hudson, C., "Vee-Clamps Solve Flange Coupling Problems," Diesel Engineering, pp. 203-204, 1977.
Takeuchi, S. and Onoda, J., "Estimation of Separation Shock of the Marman Clamp System by Using a Simple Band-Mass Model," The Japan Society for Aeronautical and Space Sciences, Vol. 45, No. 147, pp. 53-60, 2002.
Shoghi, K., Rao, H. V. and Barrans, S. M., "Stress in a Flat Section Band Clamp," Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, Vol. 217, No. 7, pp. 821-830, 2003.
Shoghi, K., Barrans, S. M. and Rao, H. V., "Plastic Deformation in Flat Section Band Clamps," Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, Vol. 219, No. 1, pp. 93-102, 2005.
Shoghi, K., "Stress and Strain Analysis of V-section Band Clamps," Ph.D. Thesis, Department of Mechanical Engineering, University of Huddersfield, 2004.
Shoghi, K., Barrans, S. M. and Rao, H. V., "Stress in V-section Band Clamps," Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, Vol. 218, No. 3, pp. 251-261, 2004.
Shoghi, K., Barrans, S. M. and Ramasamy, P., "Axial Load Capacity of V-section Band Clamp Joints," 8th International Conference on Turbochargers and Turbocharging (London), pp. 273-285, 2006.
Shigley, J. E., "Mechanical Engineering Design," McGraw-Hill, pp. 400-403, 2008.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.