최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.29 no.6, 2012년, pp.648 - 653
조성빈 (한양대학교 기계공학과) , 박창현 (한양대학교 기계공학과) , 표병기 ((주)브이엠테크) , 최동훈 (한양대학교 최적설계신기술연구센터)
Cavity pressure, an important factor in injection molding process, should be minimized to enhance injection molding quality. In this study, we decided the locations of valve gates to minimize the maximum cavity pressure. To solve this problem, we integrated MAPS-3D (Mold Analysis and Plastic Solutio...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
금형 내부 압력의 감소가 중요한 이유는 무엇인가? | 게이트 위치 변경을 통해 제어 가능한 금형 내부 압력은 제품의 충격강도 및 형체력(clamping force)에 영향을 주는 주요 공정 조건이다. 금형 내부 압력의 감소는 금형의 형체력을 줄여 에너지 낭비를 막을 수 있고 형체력 감소는 금형의 과도한 변형을 예방하여 플래쉬(flash)와 같은 성형불량 요인을 방지하고 금형 내구수명 측면에서 유리하다. | |
금형 내부 압력을 제어하기 위해서 어떻게 해야 하는가? | 용융된 수지는 밸브 게이트를 통해 금형 공동부(cavity)로 충전되고, 밸브 게이트 위치에 따라 수지 충전 패턴(flow pattern)이 달라져 금형 내부 압력(cavity pressure)이 변하게 된다. 따라서 금형 내부 압력은 밸브 게이트 위치를 조절함으로써 제어 가능하다. | |
대형 사출 금형에서 금형 내부 압력이 변화하는 이유는 무엇인가? | 대형 사출 금형은 사출공정 주기를 줄이기 위해 다수의 밸브 게이트(valve gate)를 사용한다. 용융된 수지는 밸브 게이트를 통해 금형 공동부(cavity)로 충전되고, 밸브 게이트 위치에 따라 수지 충전 패턴(flow pattern)이 달라져 금형 내부 압력(cavity pressure)이 변하게 된다. 따라서 금형 내부 압력은 밸브 게이트 위치를 조절함으로써 제어 가능하다. |
Spina, R., "Injection Moulding of Automotive Components: Comparison between Hot Systems for a Case Study," J. Mater. Process. Technol., Vol. 155-156, pp. 1497-1504, 2004.
Lee, C. W. and Hur, Y. J., "Intelligent Design System for Gate and Runner in Injection Molding," J. of the KSPE, Vol. 18, No. 9, pp. 192-199, 2001.
Lee, H. S., Kim, Y. S., Lee, H. K., and Yang, G. E., "Injection Molding Analysis of Automobile Front Bumper Fascia Using CAE," Proc. of KSAE Autumn Conference, Vol. 3, pp. 1147-1152, 2004.
Cho, S. B., Park, C. H., Pyo, B. G., Rhee, B. O., and Choi, D. H., "Optimization of Gate Location in Injection Molding Parts using Micro GA," Proc. of KSAE Spring Conference, pp. 1946-1949, 2011.
MAPS-3D User's Manual, "Mold Analysis and Plastics Solution-3 Dimension," VMTech Co. Ltd., 2011.
"PIAnO (Process Integration, Automation and Optimization) User's Manual, Version 3.3," PIDOTECH Inc., 2011.
Mckay, M. H., Beckman, R. J., and Conover, W. J., "A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output form a Computer Code," Technometrics, Vol. 21, No. 2, pp. 239-245, 1979.
Park, J. S., "Optimal Latin-hypercube Designs for Computer Experiments," J. Statist. Plann. Inference, Vol. 39, No. 1, pp. 95-111, 1994.
Krige, D. G., "A Statistical Approach to Some Basic Mine Valuation Problems on the Witwatersrand," J. of the Chem., Metaland Mining Soc. of South-Africa, Vol. 52, No. 6, pp. 119-139, 1951.
Metheron, G., "Principles of geostatistics economic geology," Economic Geology, Vol. 58, No. 8, pp. 1246-1266, 1963.
Sacks, J., Welch, W. J., Mitchell, T. J., and Wynn, H. P., "Design and analysis of computer experiments," Statistical Science, Vol. 4, No. 4, pp. 409-423, 1989.
Simpson, T. W., Mauery, T. M., Korte, J. J., and Mistee, F., "Comparisons of response surface and kriging models for multidisciplinary design optimization," Proc. 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis & Optimization, Paper No. AIAA-98-4755, 1998.
Krishnakumar, K., "Micro-Genetic Algorithms for stationary and non-stationary function optimization," Proc. SPIE, Intelligent Control and Adaptive Systems, Vol. 1196, pp. 289-296, 1989.
Nagaoka, S., Hirota, T., and Togawa, Y., "New method of designing runner system for injection mold using CAO technique," Proc. of The Society of Plastics Engineers - Annual Technical Conference, pp. 3438-3442, 2004.
Gokce, A., Hsiao, K. T., and Advani, S. G., "Branch and bound search to optimize injection gate location in liquid composite molding processes," Composites Part A : Applied Science and Manufacturing, Vol. 33, No. 9, pp. 1263-1272, 2002.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.