참고문헌 (14)

1. J. Mat. Proc. Tech. L. A. Dobrzanski 157-158 304 2004 10.1016/j.jmatprotec.2004.09.048 Dobrzanski, L. A., Golombek, K., Kopac, J., and Sokovic, M., “Effect of depositing the hard surface coating on properties of the selected cemented carbide and tool cermets,” J. Mat. Proc. Tech., Vol. 157-158, pp. 304-311, 2004. 

   상세보기

2. Int. J. Refrac. Met. Hard Mater. X. Zhang 27 3 653 2009 10.1016/j.ijrmhm.2008.10.009 Zhang, X., Liu, N., Yang, H., and Zheng, Y., “Boronizing of nano-TiN modified TiC-based cermets,” Int. J. Refrac. Met. Hard Mater., Vol. 27, No. 3, pp. 653-658, 2009. 

   상세보기

3. Int. J. Precis. Eng. Manuf. H.-B. He 11 6 937 2010 10.1007/s12541-010-0114-0 He, H.-B., Li, H.-Y., Xu, Z.-Z., Kim, D., and Lyu, S.-K., “Effect of MoS2-Based Composite Coatings on Tribological Behavior and Efficiency of Gear,” Int. J. Precis. Eng. Manuf., Vol. 11, No. 6, pp. 937-943, 2010. 

   원문보기 상세보기

4. Int. J. Mach. Tools Manuf. V. R. Dizaji 47 5 768 2007 10.1016/j.ijmachtools.2006.09.012 Dizaji, V. R., Rahmani, M., Sani, M. F., Nemati, Z., and Akbari, J., “Microstructure and cutting performance investigation of Ti(C, N)-based cermets containing various types of secondary carbides,” Int. J. Mach. Tools Manuf., Vol. 47, No. 5, pp. 768-772, 2007. 

   상세보기

5. Int. J. Mach. Tools Manuf. W. T. Kwon 44 4 341 2004 10.1016/j.ijmachtools.2003.10.023 Kwon, W. T., Park, J. S., Kim, S.-W., and Kang, S., “Effect of WC and group IV carbides on the cutting performance of Ti(C,N) cermet tools,” Int. J. Mach. Tools Manuf., Vol. 44, No. 4, pp. 341-346, 2004. 

   상세보기

6. Int. J. Refrac. Met. Hard Mater. N. Liu 24 6 445 2006 10.1016/j.ijrmhm.2005.09.001 Liu, N., Chao, S., and Yang, H., “Cutting performances, mechanical property and microstructure of ultra-fine grade Ti(C, N)-based cermets,” Int. J. Refrac. Met. Hard Mater., Vol. 24, No. 6, pp. 445-452, 2006. 

   상세보기

7. J. Mat. Proc. Tech. N. Liu 161 3 478 2005 10.1016/j.jmatprotec.2004.07.087 Liu, N., Xu, Y. D., Li, H., Chen, M. H., Zhou, J., Xie, F., and Yang, H. D., “Cutting and wearing characteristics of TiC-based cermets cutters with nano-TiN addition,” J. Mat. Proc. Tech., Vol. 161, No. 3, pp. 478-484, 2005. 

   상세보기

8. J. Mat. Sci. Y.-M. Ko 40 3 785 2005 10.1007/s10853-005-6324-7 Ko, Y.-M., Kwon, W. T., and Kim, Y.-W., “Cutting performance of Al2O3-SiC nanocomposite tools,” J. Mat. Sci., Vol. 40, No. 3, pp. 785-787, 2005. 

   상세보기

9. J. Mat. Proc. Tech. G. E. D’Errico 78 1-3 53 1998 10.1016/S0924-0136(97)00463-9 D’Errico, G. E., Calzavarini, R., and Vicenzi, B., “Influence of PVD coatings on cermet tool life in continuous and interrupted turning,” J. Mat. Proc. Tech., Vol. 78, No. 1-3, pp. 53-58, 1998. 

   상세보기

10. J. Am. Ceram. Soc. S. Y. Ahn 83 6 1489 2000 10.1111/j.1151-2916.2000.tb01415.x Ahn, S. Y. and Kang, S., “Formation of core/rim structure in Ti(C,N)-WC-Ni cermets via a dissolution and precipitation process,” J. Am. Ceram. Soc., Vol. 83, No. 6, pp. 1489-1494, 2000. 

    상세보기

11. J. Mech. Sci. Tech. H. W. Lee 24 8 1637 2010 10.1007/s12206-010-0520-3 Lee, H. W. and Kwon, W. T., “Determination of the minute range for RSM to select the optimum cutting conditions during turning on CNC lathe,” J. Mech. Sci. Tech., Vol. 24, No. 8, pp. 1637-1645, 2010. 

    원문보기 상세보기

12. 10.1007/978-1-4684-1472-1_3 Phadke, M. S., “Quality engineering using robust design,” Prentice Hall, 1989. 

    

13. Mater. Sci. Eng. A F. Qi 251 1-2 276 1998 10.1016/S0921-5093(98)00609-1 Qi, F. and Kang, S., “A study on microstructural changes in Ti(CN)-NbC-Ni cermets,” Mater. Sci. Eng. A, Vol. 251, No. 1-2, pp. 276-285, 1998. 

    상세보기

14. J. Am. Ceram. Soc. S. W. Kim 86 10 1761 2003 10.1111/j.1151-2916.2003.tb03551.x Kim, S. W., Min, K. H., and Kang, S., “Rim structure in Ti(C0.7N0.3)-WC-Ni cermets,” J. Am. Ceram. Soc., Vol. 86, No. 10, pp. 1761-1766, 2003. 

    상세보기