최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of electrical engineering & technology, v.7 no.5, 2012년, pp.730 - 735
Jang, Dae-Kyu (Department of Electrical Engineering, Donga University) , Chang, Jung-Hwan (Department of Electrical Engineering, Donga University) , Jang, Gun-Hee (PREM, Department of Mechanical Engineering, Hanyang University)
This paper presents a method to design the waveform of a back electromotive force (back EMF) of an axial flux permanent magnet (AFPM) motor using printed circuit board (PCB) windings. When the magnetization distribution of permanent magnet (PM) is given, the magnetic field in the air gap region is c...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Dr. Duane Hanselman, Brushless Permanent Magnet Motor Design, 2nd ed., The Writers's Collective, 2003, pp. 151-227, 343-366.
M. Markovic and Y. Perriard, "Simplified Design Methodology for a Slotless Brushless DC Motor," IEEE Trans. Magn., vol 42, no 12, 2006, pp 3842-3846.
A.J.A. Vandenput and J. C. Compter, Design and development of a high-speed axial flux permanentmagnet machine, Funda Sahin, 2001, pp. 110-139.
Z. Q. Zhu, D. Howe and C. C. Chan, "Improved analytical model for predicting the magnetic field distribution in brushless permanent magnet machines," IEEE Trans. Magn., vol. 38, no. 1, pp.229-238, Jan. 2002.
T. F. Chan, "Field computation for an Axial Flux permanent-Magnet Synchronous Generator," IEEE Trans. Magn., vol 24, no 1, 2009, pp. 1-11.
J. Azzouzi, G. Barakat and B. Dakyo, "Quasi-3D Analytical Modeling of the Magnetic Field of an Axial Flux Permanent Magnets Synchronous Machine", IEEE Trans. Magn., vol. 20 no. 4, 2005, pp. 746-752.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.