최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of mechanical science and technology, v.26 no.7, 2012년, pp.2033 - 2038
Jeong, Kwang-Young (Division of Mechanical and Automotive Engineering, Kongju National University) , Cheon, Seong-Sik (Division of Mechanical and Automotive Engineering, Kongju National University) , Munshi, Mahbubul Basit (Department of Mechanical Engineering, Auburn University)
The present work investigates the strain rate dependent behavior of polyurethane foams and formulates a new constitutive model in order to improve the fit of the experimental data at various strain rates. The model has seven parameters that are decided by quasi-static compression tests at two strain...
US Department of Transportation, FARS/GES 2009 Data Summary, DOT HS 811 401 (2011).
10.1115/1.4001344 U. K. Lee, S. B. Jang and S. S. Cheon, Development of a subframe type fuel tank for passenger cars, Journal of Mechanical Design (Transaction of ASME), 132(4) (2010) 044501.
International Journal of Impact Engineering V. P. W. Shim 24 703 2000 10.1016/S0734-743X(99)00149-9 V. P. W. Shim, Z. H. Tu and C. T. Lim, Two-dimensional response of crushable polyurethane foam to low velocity impact, International Journal of Impact Engineering, 24 (2000) 703-731.
International Journal of Impact Engineering M. Avalle 25 455 2001 10.1016/S0734-743X(00)00060-9 M. Avalle, G. Belingardi and R. Montanini, Characterization of polymeric structural foams under compressive impact loading by means of energy absorption diagram, International Journal of Impact Engineering, 25 (2001) 455-472.
Journal of Applied Polymer Science K. C. Rusch 13 2297 1969 10.1002/app.1969.070131106 K. C. Rusch, Load-compression behaviour of flexible foams, Journal of Applied Polymer Science, 13 (1969) 2297-2311.
Journal of Applied Polymer Science E. A. Meinecke 14 2239 1970 10.1002/app.1970.070140905 E. A. Meinecke and D. M. Schwaber, Energy absorption in polymeric foams, Journal of Applied Polymer Science, 14 (1970) 2239-2248.
Polymer Engineering and Science J. A. Sherwood 32 1138 1992 10.1002/pen.760321611 J. A. Sherwood and C. C. Frost, Constitutive modeling and simulation of energy absorbing polyurethane foam under impact loading, Polymer Engineering and Science, 32 (1992) 1138-1146.
International Journal of Impact Engineering M. Langseth 22 829 1999 10.1016/S0734-743X(98)00070-0 M. Langseth, O. S. Hopperstad and T. Berstad, Crashworthiness of aluminium extrusions: Validation of numerical simulation, effects of mass ratio and impact velocity, International Journal of Impact Engineering, 22 (1999) 829-854.
International Journal of Impact Engineering G. Subhash 36 1303 2009 10.1016/j.ijimpeng.2009.03.010 G. Subhash and Q. Liu, Quasistatic and dynamic crushability of polymeric foam in rigid confinement, International Journal of Impact Engineering, 36 (2009) 1303-1311.
International Journal of Impact Engineering M. Avalle 34 3 2007 10.1016/j.ijimpeng.2006.06.012 M. Avalle, G. Belingardi and A. Ibba, Mechanical models of cellular solids: Parameters identification from experimental tests, International Journal of Impact Engineering, 34 (2007) 3-27.
Journal of Porous Materials Q. Liu 12 233 2005 10.1007/s10934-005-1652-1 Q. Liu, G. Subhash and X. L. Gao, A parametric study on crushability of open-cell structural polymeric foams, Journal of Porous Materials, 12 (2005) 233-248.
Polymer Engineering and Science Q. Liu 44 5 463 2004 10.1002/pen.20041 Q. Liu and G. Subhash, A phenomenological constitutive model for foams under large deformation, Polymer Engineering and Science, 44(5) (2004) 463-473.
Journal of Cellular Plastics A. Nagy 10 127 1974 10.1177/0021955X7401000306 A. Nagy, W. L. Ko and U. S. Lindholm, Mechanical behavior of foamed materials under dynamic compression, Journal of Cellular Plastics, 10 (1974) 127-134.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.