최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.36 no.12, 2012년, pp.1627 - 1633
이민욱 (한국해양과학기술원 해양시스템연구부) , 박성재 (한국해양과학기술원 해양시스템연구부) , 여태경 (한국해양과학기술원 해양시스템연구부) , 김형우 (한국해양과학기술원 해양시스템연구부) , 홍섭 (한양대학교 자동차공학과) , 조수길 (한양대학교 자동차공학과) , 장준용 (한양대학교 자동차공학과) , 이태희 (한양대학교 자동차공학과) , 최종수 (한국해양과학기술원 해양시스템연구부)
A deep-sea pressure vessel needs to protect the internal electrical equipment from the high external pressure. Thus, the pressure vessel should be designed to be watertight and structurally safe. In this study, a cylindrical-type pressure vessel comprising a hollow cylinder and cover plates at both ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
심해저 망간단괴는 육상 광상에 비해 어떤 함량이 높으며 어디에 분포하는 자원인가? | 육상 광상에 비해 니켈, 코발트, 구리의 함량이 대단히 높은 심해저 망간단괴는 수심 약 3000∼ 5000m 의 심해저에 널리 분포되어 있는 대표적인 광물자원이다. 특히, 태평양의 클라리온-클립퍼톤 해역(CCFZ)에 부존되어 있으며, 막대한 양의 망간 단괴는 세계 선진 각국의 상업적 개발의 목표가 되고 있다. | |
심해저 장비에 사용되는 압력용기는 어떻게 설계되어야 하는가? | 심해저 장비에 사용되는 압력용기는 내장된 전자장비를 대기압 상태로 보호할 수 있도록 설계되어야 한다. 따라서 해수에 노출되지 않도록 수밀성과 심해의 높은 압력을 견딜 수 있는 구조적 안전성을 확보해야 한다. | |
심해저 장비에 사용되는 압력용기 설계에 있어 확보해야 하는 것은? | 심해저 장비에 사용되는 압력용기는 내장된 전자장비를 대기압 상태로 보호할 수 있도록 설계되어야 한다. 따라서 해수에 노출되지 않도록 수밀성과 심해의 높은 압력을 견딜 수 있는 구조적 안전성을 확보해야 한다. 본 연구의 압력용기는 원통형이며, 중앙부의 원통형 용기와 양 끝단의 평판형 덮개부로 이루어져있다. |
Mckelvey, V.E., 1986, "Subsea Mineral Resources," US Geological Survey bulletin No. 1689-A.
Hong, S., 1995, "A Study on the Technological Development for the Deep Seabed Mining and the Protection of the Deepsea Environment : A Study on Mining Technology of Deep Seabed Manganese Nodules," Annual Report, BSN350-1907D, pp i-iii.
Yeu, T.K., Park, S.J., Yoon, S.M. Kim, H.W., Choi, J.S. and Hong S., 2011, "Conceptual Design of Electrical and Electronic System for Pilot Mining Robot," KSOE 2011 Autumn Conference, pp. 30-33.
Newell, C. and Brown, G., 2005, " Underwater Optical and Electrical Connector Systems, Technical Innovations," Proc. of 2005 Offshore Technology Conference.
Joung, T.H., 2006, "A Study on the Design and Manufacture of a Deep-sea Unmanned Underwater Vehicle Based on Structural Reliability," Ph. D. Thesis, Chungnam National University, pp. 13-26
Ugural, A.C., 1981, "Stresses in plates and shells," McGraw-Hill Book Company, New York
Pilkey, W. D. and Pilkey, D. F., 2008, "Peterson's Stress Concentration Factors," John Wiley & Sons, New York.
Sacks, J., Welch, W. J., Mitchell, T. J. and Wynn, H.P., 1989, "Design and Analysis of Computer Experiments," Statistical Science, Vol. 4, No. 4, pp.409-435.
Johnson, M. E. and Moore, L. M., Ylvisaker, D, 1990, "Minimax and maximin distance designs," J Stat Plan Inference, 26(2), pp. 131-148.
Jung, J.J. and Lee, T.H., 2003, "Global Optimization Using Differential Evolution Algorithm," Trans. of KSME(A), Vol. 27, No. 11, pp.1809-1814.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.