최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓溶接·接合學會誌 = Journal of the Korean Welding and Joining Society, v.31 no.6, 2013년, pp.84 - 89
권혜미 (부산대학교 하이브리드소재솔루션 국가핵심연구센터) , 박철호 (부산대학교 재료공학부) , 홍인표 (현대중공업 생산기술연구소) , 강남현 (부산대학교 재료공학부)
The demand of LNG tank and the constituting material, i.e., the Al5083 thick plate, increased due to the rapid growth LNG market. To weld the Al5083 thick plate, the gas metal arc welding (GMAW) of high current is necessary to increase manufacturing productivity incurred by the multi pass welding. H...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Al5000계 합금이란? | Al5000계 합금은 마그네슘(Mg)의 고용강화 효과를 이용한 비열처리 합금으로, 그 중 Al5083 합금은 4-5wt% 마그네슘을 함유하고 있어 다른 Al 합금에 비해 높은 강도와 내식성 및 용접성을 가진다4). | |
Al5083 합금이 4-5wt% 마그네슘을 함유하고 있어서 가지는 특성은? | Al5000계 합금은 마그네슘(Mg)의 고용강화 효과를 이용한 비열처리 합금으로, 그 중 Al5083 합금은 4-5wt% 마그네슘을 함유하고 있어 다른 Al 합금에 비해 높은 강도와 내식성 및 용접성을 가진다4). | |
Al 합금에 대전류 용접이 될 경우 비점이 낮은 마그네슘의 기화가 발생하는데 이때 발생하는 문제는? | 그러나 Al 합금에 대전류 용접이 될 경우 비점이 낮은 마그네슘의 기화가 발생할 수 있다6). Al5000계열 합금은 마그네슘의 고용량과 기계적 성질이 비례하기 때문에, 마그네슘의 기화가 발생할 경우 용접부의 기계적 성질이 저하되게 된다6-8). 이는 용접시 마그네슘을 다량 포함한 용가재를 사용하여 마그네슘 기화로 인한 기계적 성질 저하를 방지 할 수 있으며, 용가재도 용접중에 마그네슘 기화가 발생하므로 모재보다 더 높은 마그네슘 함량을 가진 용가재의 사용이 필요하다9). |
Y.B. Choi, M.J. Kang, D.C. Kim and I.S. Hwang : High Current Arc Welding Technology of Aluminum Alloy, Journal of KWJS, 31-1 (2013), 21-25 (in Korean)
T.C. Lee, H.W. Lee, D.W. Joo, J.H Lee and J.H Sung : Effect of aging treatment on the microstructure and low temperature tensile properties in 5083 aluminum alloy weldments, Journal of the Korean society for heat treatment, 13 (2000), 1-9
S.H. Hong : Present status and prospect of LNG storage tank, Journal of KWS, 13-3 (1995), 1-7 (in Korean)
J.L. Searles, P.I. Gouma and R.G. Buchheit : Stress Corrosion Cracking of Sensitized AA5083, Metallurgical and Materials Transaction A, 32A (2001), 2859-2867
J.H. Kim, D.H. Park : Porosity in Thick Aluminum Alloy Welds, Journal of KWS. 12-1 (1994), 7-11
A. Blake and J. Mazumder : Control of Magnesium Loss During Laser Welding of Al-5083 Using a Plasma Suppression Technique, Transactions of the ASME, 107 (1985), 276-280
H. Zhao and T. Debroy : Weld Metal Composition Change during Conduction Mode Laser Welding of Aluminum Alloy 5182, Metallurgical and Materials Transactions B, 32B (2001), 163-172
T. Mukai, K. Higashi, S.Tanimura : Influence of the magnesium concentration on the relationship between fracture mechanism and strain rate in high purity Al-Mg alloys, Materials Science and Engineering, 176 (1994), 181-189
J.B Wang, H. Nishimura, S. Katayama and M. Mizutani : Evaporation phenomena of magnesium during pulsed- MIG arc welding of aluminum alloy, Transactions of JWRI, 39 (2010), 19-21
K. Sindo, Welding metallurgy, 2nd edition, Wiley-Interscience, 2002, 204-209
A. Block-Bolten and T. W. Eager : Metal vaporization from weld pools, Metallurgical Transactions B, 15B (1984), 461-469
D. Yang, X. Li, D. He, H. Hui and L. Zhang : Study on microstructure and mechanical properties of Al-Mg-Mn-Er alloy joints welded by TIG and laser beam, Materials and Design, 40 (2012), 117-123
U. Dilthey, A. Goumeniouk, V. Lopota, G. Turichin and E. Valdaitseva : Development of a theory for alloying element losses during laser beam welding, Journal of Physics D : Applied Physics, 34 (2001), 81-86
M. Pastor, H. Zhao, R. P. Martukanitz and T. Debroy : Porosity, Underfill and Magnesium loss during continuous wave Nd:YAG laser welding of thin plates of aluminum alloys 5182 and 5754, Welding Journal, 78 (1999), 207-216
E. Romhanji and M. Popovic : Problems and prospect of Al-Mg alloys application in marine constructions, Metalurgija-journal of metallurgy, 12(2006), 297-307
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.