최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國海洋工學會誌 = Journal of ocean engineering and technology, v.27 no.1 = no.110, 2013년, pp.37 - 42
이원준 (경상대학교 대학원 정밀기계공학과) , 이효재 ((주)엠스코) , 김형진 (경상대학교 기계시스템공학과, 해양산업연구소) , 박원조 (경상대학교 에너지기계공학과, 해양산업연구소)
The presence of a crack can increase the local stress or strain, which can cause inelastic deformation and significantly reduce the life of a component or structure. Therefore, in this study, the fatigue crack growth (FCG) behaviors of friction stir welded Al 2024-T3 and Al 7075-T6 specimens were ex...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
알루미늄 합금의 장점은? | 알루미늄 합금은 내식성과 강도가 좋으며, 비중이 약 2.7로 연강의 약 1/3의 경합금이므로 공업용이나 상업적으로 널리 사용되고 있지만, 용접성이 나쁘기 때문에 사용에 많은 제약을 받고 있다. | |
알루미늄 합금의 단점은? | 알루미늄 합금은 내식성과 강도가 좋으며, 비중이 약 2.7로 연강의 약 1/3의 경합금이므로 공업용이나 상업적으로 널리 사용되고 있지만, 용접성이 나쁘기 때문에 사용에 많은 제약을 받고 있다. | |
알루미늄 합금의 문제점을 해결할 수 있는 용접법은? | 따라서 이 문제점들을 해결할 수 있을 용접법으로 최근에 주목 받고 있는 마찰교반용접(Friction stir welding, FSW)은 영국의 용접기술연구소에서 1991년에 특허를 출원한 비교적 새로운 공정이며(Kim et al., 2011), 또한 기존의 마찰용접은 원형단면부 재의 접합에 한정된다는 고정관념을 타파한 점에서 많은 주목을 받고 있다. |
Cho, J.H., Kim, M.H., Choi, J.W., 2012. Application of Friction Stir Welding Processes for Aluminum alloy Boat. Journal of KWJS, 30(2), 135-140.
Hatamleh, O., Forth, S., Reynolds, A.P., 2010. Fatigue Crack Growth of Peened Friction Stir-Welded 7075 Aluminum Alloy Different load Ratios. Journal of Materials Engineering Performance, 19, 99-106.
Hong, S.J., Jang, Y.H., Jeong, Y.I., Lee, T.J., Lee, C.G., Kim, S.J., Kim, S.S., 2007. Fatigue Crack Propagation Behavior of Friction Stir Welded 5083-H32 and 6061-T651 Aluminum Alloys. J. Kor. Inst. Met. & Mater, 45(02), 90-100.
Jang, S.K., Han, M.S., Jeon, J.I., 2007. Effects of Tool Rotation and Transition Speed during Friction Stir Welding of Al 7075-T651 Alloy. Trans. of the KSME (A), 31(14), 532-539.
Kim, C.O., Kim, S.J., 2011. Effect of welding condition on Tensile Properties of Friction Stir Welded Joints of Al-7075- T651 Plate. Journal of the Korea Society for Power System Engineering, 15(2), 61-68.
Kim, C.O., Sohn, H.J., Kim, S.J., 2011. Friction Stir Welding of 7075-T651 Aluminum Plates and Its Fatigue Crack Growth Property. Trans. of the KSME (A), 35(10), 1347-1353.
Lee, H.J., Park, S.H., Park, W.J., 2009. Characteristics of Fatigue Crack Growth for Camshaft Material Applied to High Frequence Induction Treatment. Journal of Ocean Engineering and Technology, 23(3), 46-52.
Lee, Y.H., Lee, K.C., 2008. Welding/Joining Engineering. Intervision, Korea.
Lim, M.B., Yoon H.K., Park, W.J., 2002. A study on the X-ray Diffraction Analysis and the Fatigue crack Growth Behavior for the Gas Piping Material. Journal of Ocean Engineering and Technology, 16(3), 54-58.
Park, K.D., Kim, J.H., Yoon, H.K., Park, W.J., 2001. A study on Fatigue Crack Propagation Behavior Pressure Vessel Steel SA516/70 at High Temperature. Journal of Ocean Engineering and Technology, 15(2), 105-110.
Park, W.J., Huh, S.C., Park, S.H., 2006. A Study on the Fatigue Characteristics of Al6061-T651 by Shot Peening Velocity. Key Engineering Materials, 326-328 II, 1093-1096.
Peel, M.J., Steuwer, A., Withers, P.J., 2006. Dissimilar Friction Stir Welds in AA5083-AA6082. Part II: Process Parameter Effects on Microstruecture. Matall. Mater. Trans. A., 37 (7), 2195-2206.
Sato, Y.S., Kokawa, H., Ikeda, K., Enomoto, M., Jogan, S., Hashimoto, T., 2001. Microtexture in Friction Stir Weld of an Aluminum Alloy. Metallurgical and Materials Transcations, 32A, 941-948.
Woo, W.C., Choo, Hahn., Brown, D.W., Feng, Z.L., Liaw, Peter. K., 2006. Angular distortion and through-thickness residual stress distribution in the friction stir processed 6061-T6 aluminum alloy. Materials Science and Engineering A, 437, 64-69.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.