최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.33 no.2 = no.281, 2009년, pp.108 - 113
The mixing of two dissimilar aluminum alloys in friction stir welding (FSW) was investigated using etching. The results show that the materials from the retreating side mixed into the advancing side in rather narrow and elongated bands whereas the materials from the advancing side mixed into the ret...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
성공적인 FSW의 수치모델의 중요한 요소는? | 그러나 일반적으로, 특정한 응용분야에 관한 FSW공정의 개발은 실험적인 방법에 의존하여왔으며,(2~6) 최근에 들어서야 FSW에 대한 수치해석적인 다양한 연구들이 보고되고 있다.(7~14) 성공적인 FSW의 수치모델의 중요한 요소들 중의 하나는 접합부의 기계적 성질에 큰 영향을 미치는 용접과정 중의 소재들의 유동과 혼합을 정확히 예측하는 것이다. 그러므로, FSW의 수치모델에서 예측된 소재들의 유동과 혼합거동의 실제 실험결과와의 비교를 통해서 FSW의 수치해석 결과의 정확도를 검증할 수 있을 것이다. | |
마찰교반용접이란? | 마찰교반용접(Friction Stir Welding; FSW)은 동종 혹은 이종 소재간의 접합이 소재의 용융점 이하에서 고형상태로 이루어지는 비용융 접합방법이다.(1) 기존의 용융접합 공정들에 비해서 FSW이 가지는 장점들을 다음과 같다. | |
마찰교반용접이 기존의 용융접합 공정들에 비해서 가지는 장점은? | ● 적은 용접결함 ● 낮은 잔류응력 ● 우수한 피로강도 ● 높은 연성과 인성 ● 이종소재 혹은 일반적인 용접방법으로는 용접이 힘들거나 불가능한 소재의 용접이 가능 ● 현격한 에너지/생산비용 절감 |
Thomas, W. M., Nicholas, E. D., Needhman, J. C., Church, M.G., Templesmith, P., and Dawes, C. J., "Friction Stir Butt Welding," Intl Patent No. PCT/GB92/02203
Record, J. H., Covington, J. L., Nelson, T. W., Sorensen, C. D., Webb, B. W., 2004, "Fundamental Characterization of Friction Stir Welding,” 5th Int. Symp. Fric. Stir Weld., Metz, France, 14-16 September
Sato, Y. S., Park, S. H. C., Michiuchi, M., Kokawa, H., 2004, “Constitutional Liquation during Dissimilar Friction Stir Welding of Al and Mg Alloys,” Scripta Mater., Vol. 50, No. 9, pp. 1233-1236
Cook, R., Arbegast, W., Fox, S. L., Handby, T., 2005, “Friction Stir Welding of Dissimilar Aluminum Alloys,” Proc. 2005 TMS annual meeting, San Francisco, USA, 13-17 February
Peel, M. J., Steuwer, A., Withers, P. J., Dickerson, T., Shi, Q., Shercliff, H., 2006, "Dissimilar Friction Stir Welds in AA5083-AA6082. Part I: Process Parameter Effects on Thermal History and Weld Properties,” Metall. Mater. Trans. A., Vol. 37, No. 7, pp. 2183-2193
Peel, M. J., Steuwer, A., Withers, P. J., 2006, “Dissimilar Friction Stir Welds in AA5083-AA6082. Part II: Process Parameter Effects on Microstructure,” Metall. Mater. Trans. A., Vol. 37, No. 7, pp. 2195-2206
Lockwood, W. D., Reynolds, A. P., 2003, “Simulation of the Global Response of a Friction Stir Weld using Local Constitutive Behavior,” Mat. Sci. Eng. A-Struct., Vol. 339, No. 1-2, pp. 35-42
Chen, C., Kovacevic, R., 2003, “Finite Element Modeling of Thermomechanical Perform Friction Stir Welding,” Proc. 4th Int. Symp. Fric. Stir Weld., Park City, USA, 14-16 May
Colegrove, P. A., Shercliff, H. R., Threadgill, P. L., 2003, “Modelling and Development of Friction Stir Welding Tool,” Proc. 4th Int. Symp. Fric. Stir Weld., Park City, USA, 14-16 May
Colegrove, P. A., Shercliff, H. R., 2004, “Modelling of the Friction Stir Welding of Aerospace Alloys,” 5th Int. Symp. Fric. Stir Weld., Metz, France, 14-16 September
Vilaca, P., Quintino, L., Dos Santos, J. F., 2005, “iSTIR-Analytical Thermal Model for Friction Stir Welding,” J. Mater. Process. Tech. Vol. 169, No. 3, PP. 452-465
Kakarla, S. S. T., Mici-Kuchler, K. H., Arbegast, W. J., Allen, C. D., 2005, “Three-Dimensional Finite Element Model of the Friction Stir Welding Process,” Proc. 2005 TMS annual meeting, San-Francisco, USA, 13-17 February
Tartakovsky, A. M., Grant, G. J., Sun, X., Khaleel, M., 2006, “Modeling of Friction Stir Welding (FSW) Process with Smooth Particle Hydrodynamics (SPH),” SAE technical paper 2006-01-1394, SAE 2006 world congress, Detroit, USA, 3-6 April
Tartakovsky, A., Grant, G. J., Sun, X., Hong, S.-T., Khaleel, M., 2006, “Smooth Particle Hydrodynamics (SPH) Model for Friction Stir Welding (FSW) of Dissimilar Materials,” Proc. 6th Int. Symp. Fric. Stir Weld., Saint-Sauveur, Canada, 10-13 October
Coligan, K. J., 1999, “Material Flow Behavior During Friction Stir Welding,” Weld. J., Vol. 78, No. 7, pp. 229s-237s
Reynolds, A., Seidel, T. U., Simonsen, M., 1999, “Visualisation of Material Flow in an Autogenous Friction Stir Weld,” Proc. 1st Int. Symp. Fric. Stir Weld., Thousand Oaks, USA, 14-16 June
Wert, J. A., 2003, “Microstructures of Friction Stir Weld Joints between an Aluminium-Base Metal Matrix Composite and a Monolithic Aluminium Alloy,” Scripta Mater., Vol. 49, No. 6, pp. 607-612
Zhao, Y.-H., Lin, S.-B., Qu, F.-X., Wu, L., 2006, “Influence of Pin Geometry on Material Flow in Friction Stir Welding Process,” Mater. Sci. Tech., Vol. 22, No. 6, pp. 45-50
Guerra, M., Schmidt, C., McClure, J. C., Murr, L. E., Nunes, A. C., 2002, “Flow Patterns During Friction Stir Welding,” Mater. Charact. Vol. 49, No. 2, pp.95-101
Lim, J.-K., Seo, D.-W., Li, Z.-S., 1999, “A study on Tensile and Fatigue Properties of Aged NAS 254N Stainless Steel at Elevated Temperatures,” Journal of Mech. Science Tech., Vol. 13, No. 5, PP. 397-402
ASM handbook, Volume 20, Materials Selection and Design, ASM International Metals Park, Ohio 2004
ASM handbook, Volume 9, Metallography and Microstructures, ASM International Metals Park, Ohio 2004
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.