최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Korean chemical engineering research = 화학공학, v.51 no.5, 2013년, pp.628 - 633
이은호 (충북대학교 화학공학과) , 김대수 (충북대학교 화학공학과)
Carbon black was surface-modified to prepare styrene-based suspension polymerized toner with excellent carbon black dispersibility inside toner particles. Carbon black was oxidized first to introduce hydroxyl groups on the surfaces, then esterification between the hydroxyl groups and carboxyl groups...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
프린터 시장이 지향하는 방향은? | 현재 프린터 시장은 컬러화, 소형화, 고속화, 고해상도화를 지향하고 있다. 시대적인 변화에 발 빠른 대처를 하기 위해서 기존에 가정용으로 쓰이던 잉크젯 프린터 보다는 고속 레이저 프린터의 보급이 급속도로 증가하고있는 추세이며 이와발맞춰중합토너의 기술개발도 이루어지고 있다. | |
토너의 특징 및 장점은 무엇인가? | 시대적인 변화에 발 빠른 대처를 하기 위해서 기존에 가정용으로 쓰이던 잉크젯 프린터 보다는 고속 레이저 프린터의 보급이 급속도로 증가하고있는 추세이며 이와발맞춰중합토너의 기술개발도 이루어지고 있다. 토너는 정전기적 특성을 이용하여 레이저 프린터에서 문서를 인쇄하기 위한 가장 중요한 물질로써 각 색별로 4가지 컬러(black, yellow, cyan, magenta)로 구성되어 있으며 잉크와 같은 번짐이 없고 인쇄 후 장기간 보존이 가능하다는 장점을 갖고 있다[1]. 그 중 블랙중합 토너는 안료로 사용되는 카본블랙의 표면특성 때문에 4가지 컬러 중 가장 고난이도의 기술력을 필요로 한다. | |
카본블랙의 표면을 화학적으로 개질하는 방법 두 가지는 무엇인가? | 카본블랙의 표면을 화학적으로 개질하는 방법은 크게 두 가지로 분류할 수 있다. 첫 번째로는 잘 알려진 산화방법인 질산과 황산을 이용한 화학적 산화방법이고 두 번째로는 상전이 촉매(phase transfer catalyst)를 이용한 표면개질이다[2]. 상전이 촉매에 의한 표면개질은 전통적인 화학적 산화방법보다 몇 가지 이점을 가지고 있어서 최근 연구가 많이 진행되고 있다. |
Park, M. S. and Hong, S. K., "Synthesis of Black Toner Particles by Suspension Polymerization," J. Korea Soc. Imaging Sci., 3(1), 40-45(1997).
Xing, G., Zhang, J., Zhao, Y., Tang, J., Zhang, B., Gao, X., Yuan, H., Qu, L., Cao, W., Chai, Z. and Ibrahim, K., "Influences of Structural Properties on Stability of Fullerenols," J. Phys. Chem. B, 108(31), 11473-11479(2004).
Zhang, N., Xie, J. and Varadan, V. K., "Functionalization of Carbon Nanotubes by Potassium Permanganate Assisted with Phase Transfer Catalyst," Smart Mater. Struct., 11(6), 962-965(2002).
Tsubokawa, N., Satoh, T., Murota, M., Sato, S. and Shimizu, H., "Grafting of Hyperbranched Poly(amidoamine) Onto Carbon Black Surfaces Using Dendrimer Synthesis Methodology," Polym. Adv. Technol., 12(10), 596-602(2001).
Takeuchi, Y., Fujiki, K. and Tsubokawa, N., "Preparation of Amphiphilic Carbon Black by Postgrafting of Polyethyleneimine to Grafted Polymer Chains on the Surface," Poly. Bull., 41(1), 85-90(1998).
Li, W., Xie, Z. and Li, Z., "Synthesis, Characterization of Poly-acrylate-g-carbon Black and Its Application to Soap-free Waterborne Coating," J. Appl. Polym. Sci., 81(5), 1100-1106(2001).
Jang, H. S., Hong, J. H., Lee, J. W. and Shim, S. E., "Microencapsulation of Surface-modified Carbon Black by Miniemulsion Polymerization," Korean Chem. Eng. Res.(HWAHAK KONGHAK), 46(4), 669-675(2008).
Lee, J. H., Lee, S. N. and Park, M. S., "Preparation of Polystyrene Particles Based on Interfacial Stability of Suspension Polymerization," J. Korean Printing Soc., 20, 65-77(2002).
Iwata, N., Tani, K. and Watada, A., "Chemical Component Mapping of Pulverized Toner by Scanning Transmission X-ray Microscopy," Micron: the International Research and Review Journal for Microscopy, 37(4), 290-295(2006).
Hong, J., Hong, C. K. and Shim, S. E., "Synthesis of Polystyrene Microspheres by Dispersion Polymerization Using Poly(vinyl alcohol) as a Steric Stabilizer in Aqueous Alcohol Media," Colloids Surf. A: Physicochem. Eng. Asp., 302, 225-233(2007).
Jeon, J. W. and Kim, S. S., "A Study on the PVA Particle Manufacturing for Polymerization Type Fine Toner," J. Korea Soc. Dyers and Finishers, 15(6), 8-17(2003).
Park, M. S., "Preparation of Polystyrene Beads by Suspension Polymerization with Hydrophobic Silica as a Stabilizer in Aqueous Solution," Polymer(Korea), 30(6), 498-504(2006).
Hasegawa, J., Yanagida, N. and Tamura, M., "Toner Prepared by the Direct Polymerization Method in Comparison with the Pulverization Method," Colloids Surf. A: Physicochem. Eng. Asp., 153, 215-220(1999).
Yang, J., Wang, T. J. and He, H., "Particle Size Distribution and Morphology of in Situ Suspension Polymerized Toner," Ind. Eng. Chem. Res., 42, 5568-5575(2003).
Sawatari, N., Fukuda, M., Taguchi, Y. and Tanaka, M., "Composite Polymer Particles with a Gradated Resin Composition by Suspension Polymerization," J. Appl. Poly. Sci., 97(2), 682-690(2005).
Stevens, M. P., "Polymer Chemistry: An Introduction," Oxford Univ. Press, New York, 204(1999).
Choi, D. and Park, M., "Preparation of Positively Charged Toner Particles by Suspension Polymerization Technique," J. Korea Soc. Imaging Science, 6(1), 61-68(2000).
Lee, S. Y. and Park, L. S., "Effect of Poly(vinyl alcohol) and Poly(vinyl alcohol) Mono Thiol on the Stability Properties of Poly(vinyl acetate) Latex," Polymer(Korea), 24(5), 579(2000).
Dating, T., "Synthesis and Properties of Super Absorbents by Inverse Suspension Polymerization Using an Amphiphilic Copolymer as Steric Stabilizer," Chinese J. Synth. Chem., 11(1), 41-46(2003).
Wang, P., Guo, Z. and Liu, Y., "Studies on the Suspension Polymerization of Poly-organic Silicone Resin Beads," Ion Exchange and Adsorption, 24(2), 131-138(2008).
Chang, B. J., Oh, I. S. and Kim, J. I., "Size Control and Electrical Properties of Styrene-based Micro-particle Copolymer by Suspension Polymerization," Polymer(Korea), 23(2), 204-212(1999).
Park, S., Kim D. E., Byun J., Yu, J. G. and Kim, D. S., "Styrenebutylacrylate Based Suspension Polymerized Toner Prepared Using PVA as a Suspending Agent," Korean Chem. Eng. Res. (HWAHAK KONGHAK), 48(2), 212-217(2010).
Kim, N. S. and Kim, D. S., "Preparation of Methyl Methacrylate-Styrene System Core-Shell Latex by Emulsion Polymerization,"J. Korean Oil Chemists' Soc., 22(2), 96-105(2005).
Pang, X., Cheng, G. and Lu, S., "Bi-seeded Emulsion Polymerization in the Presence of Poly(methyl methacrylate) and Polystyrene," React. Funct. Polym., 62(1), 69-75(2005).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.