최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기청정기술 = Clean technology, v.19 no.3, 2013년, pp.243 - 248
최재용 (공주대학교 신소재공학부) , 이주혁 (공주대학교 신소재공학부) , 김미리 (공주대학교 신소재공학부) , 이기석 (공주대학교 기계자동차공학부) , 조국영 (공주대학교 신소재공학부)
Thermally conductive materials are widely used in various applications where effective heat dissipation is required. Graphene shows high potential for various uses owing to high electrical conductivity, good mechanical strength, and high thermal conductivity. Generally previous works used organic so...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전자소자의 발열 제어가 어려운 이유는? | 최근 차세대 전자소자는 박형화 및 다기능화로 인해 고집 적화되어 이에 따른 열 밀도의 증가로 발열의 효과적인 제어가 어렵다. 이러한 발열의 문제로 인해 전자 소자의 신뢰성 및 수명이 저하되는 심각한 단점이 있다[1-4]. | |
전자소자의 효과적인 발열 제어를 위해 필요한 것은? | 이러한 발열의 문제로 인해 전자 소자의 신뢰성 및 수명이 저하되는 심각한 단점이 있다[1-4]. 효과적인 발열 제어를 위해서는 높은 열전도도를 가지는 물질이 필요하며 이를 응용한 열전도성 복합재료가 각광받고 있다. 열전도성 복합재료는 특히 전자소자에서 기존의 금속이 차지하고 있던 기능을 대체할 수 있는 새로운 가능성을 제공하며, 가볍고 목적에 맞는 열전도를 가질 수 있다[5-7]. | |
열전도성 복합재료의 수지로 많이 사용되는 고분자의 매우 낮은 열전도성을 해결하기위한 방안은? | 열전도성 복합재료의 수지로 많이 사용되는 고분자는 일반적으로 매우 낮은 열전도 성을 가지고 있다[6]. 이를 해결하기 위해서는 우수한 열전도성을 갖춘 충전제(filler)를 도입해야 한다. 현재 열전도성 복합 재료에는 산화 알루미늄(Al2O3), 질화 알루미늄(AlN), 보론나이트라이드(BN) 등의 충전제(filler)를 첨가하여 많이 사용되고 있다[7-9]. |
Lee, H. L., Ha, S. M., Yoo, Y., and Lee, S.-G., "Current Trends in Thermally Conductive Polymer Composites," Polym. Sci. Technol., 24(1), 30-37 (2013).
Park, O.-K., Lee, S., Ku, B.-C., and Lee, J. H., "A Review of Graphene-based Polymer Nanocomposites," Polym. Sci. Technol., 22(5), 467-473 (2011).
Prasher, R., "Thermal Interface Materials: Historical Perspective, Status, and Future Directions," Proc. IEEE, 94(8), 1571-1586 (2006).
Yim, S.-W., Lee, J.-H., Lee, Y.-G., Lee, S.-G., and Kim, S.-R., "Effect of the Pressure on the Interface and Thermal Conductivity of Polypropylene-SiC Composites," J. Adhes. Interface, 10(1), 30-34 (2009).
Hong, J., and Shim, S. E., "Trends in Development of Thermally Conductive Polymer Composites," Appl. Chem. Eng., 21(2), 115-128 (2010).
Luyt, A. S., Molefi, J. A., and Krump, H., "Thermal, Mechanical and Electrical Properties of Copper Powder Filled Low-density and Linear Low-density Polyethylene Composites," Polym. Degrad. Stabil., 91(7), 1629-1636 (2006).
Sanada, K., Tada, Y., and Shindo, Y., "Thermal Conductivity of Polymer Composites with Close-packed Structure of Nano and Micro Fillers," Compos. Part A-Appl. S. Manuf., 40(6-7), 724-730 (2009).
Lee, E.-S., Lee, S.-M., Shanefield, D. J., and Cannon, W. R., "Enhanced Thermal Conductivity of Polymer Matrix Composite via High Solids Loading of Aluminium Nitride in Epoxy Resin," J. Am. Ceram. Soc., 91(4), 1169-1174 (2008).
Zhi, C., Bando, Y., Terao, T., Tang, C., Kuwahara, H., and Golberg, D., "Towards Thermoconductive, Electrically Insulating Polymeric Composites with Boron Nitride Nanotubes as Fillers," Adv. Funct. Mater., 19(12), 1857-1862 (2009).
Xu, J., Razeeb, K. M., and Roy, S., "Thermal Properties of Single Walled Carbon Nanotube-silicone Nanocomposites," J. Polym. Sci. B: Polym. Phys., 46(17), 1845-1852 (2008).
Im, H., and Kim, J., "Thermal Conductivity of a Graphene Oxide-carbon Nanotube Hybrid/Epoxy Composite," Carbon, 50(15), 5429-5440 (2012).
Potts, J. R., Dreyer, D. R., Bielawski, C. W., and Ruoff, R. S., "Graphene-based Polymer Nanocomposites," Polymer, 52(1), 5-25 (2011).
Teng, C.-C., Ma, C.-C. M., Lu, C.-H., Yang, S.-Y., Lee, S.-H., Hsiao, M.-C., Yen, M.-Y., Chiou, K.-C., and Lee, T.-M., "Thermal Conductivity and Structure of Non-covalent Functionalized Graphene/Epoxy Composites," Carbon, 49(15), 5107-5116 (2011).
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., and Lau, C. N., "Superior Thermal Conductivity of Single-layer Graphene," Nano Lett., 8(3), 902-907 (2008).
Kuilla, T., Bhadra, S., Yao, D., Kim, N. H., Bose, S., and Lee, J. H., "Recent Advances in Graphene Based Polymer Composites," Prog. Polym. Sci., 35(11), 1350-1375 (2010).
Bai, H., Li, C., and Shi, G., "Functional Composite Materials Based on Chemically Converted Graphene," Adv. Mater., 23(9), 1089-1115 (2011).
Zaman, I., Phan, T. T., Kuan, H.-C., Meng, Q., La, L. T. B., Luong, L., Youssf, O., and Ma, J., "Epoxy/Graphene Platelets Nanocomposites with Two Levels of Interface Strength," Polymer, 52(7), 1603-1611 (2011).
Vadukumpully, S., Paul, J., Mahanta, N., and Valiyaveettil, S., "Flexible Conductive Graphene/Poly(vinyl chloride) Composite Thin Films with High Mechanical Strength and Thermal Stability," Carbon, 49(1), 198-205 (2011).
Hwangbo, K.-H., Kim, M. R., Lee, C.-S., and Cho, K. Y., "Facile Fabrication of Uniform Golf-ball-shaped Microparticles from Various Polymers," Soft Matter, 7(22), 10874-10878 (2011).
Lewis, C. L., Choi, C.-H., Lin, Y., Lee, C.-S., and Yi, H., "Fabrication of Uniform DNA-conjugated Hydrogel Microparticles via Replica Molding for Facile Nucleic Acid Hybridization Assays," Anal. Chem. 82(13), 5851-5858 (2010).
Choi, C.-H., Jeong, J.-M., Kang, S.-M., Lee, C.-S., and Lee, J., "Synthesis of Monodispersed Microspheres from Laplace Pressure Induced Droplets in Micromolds," Adv. Mater., 24(37), 5078-5082 (2012).
Jin, H.-J., Choi, H. J., Yoon, S. H., Myung, S. J., and Shim, S. E., "Carbon Nanotube-adsorbed Polystyrene and Poly(methyl methacrylate) Microspheres," Chem. Mater., 17(16), 4034-4037 (2005).
Ryou, M.-H., Lee, Y. M., Cho, K. Y., Han, G.-B., Lee, J.-N., Lee, D. J., Choi, J. W., and Park, J.-K., "A Gel Polymer Electrolyte Based on Initiator-free Photopolymerization for Lithium Secondary Batteries," Electrochim. Acta, 60, 23-30 (2012).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.