최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.38 no.1, 2014년, pp.79 - 88
김흥규 (국민대학교 자동차공학과) , 정철재 (삼도프레스 기술연구소) , 조종두 (인하대학교 기계공학부)
Enhancing the working speed and positional accuracy of high-speed press machines is essential for improving the parts accuracy and productivity. However it is known that the positional accuracy decreases and the risk of parts failure increases as the working speed of press machine increases. Therefo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
국내 초정밀 고속프레스 제품의 수준은? | (1,2) 그러나 국내에서는 초정밀 성형 기술과 장비에 대한 원천기술은 활발한 연구가 수행되었으나, (3~6) 제품 양산에 직접 활용되고 있는 프레스 장비를 대상으로 한 상용화 관점의 정밀화 기술 연구는 아직도 상당히 미흡한 상황이다. (7) 이로 인해 국내 프레스 제품의 수준은 많은 노하우가 축적된 외국 선진제품에 비해 낙후된 수준이며 이에 따라 관련 프레스 제품의 수입 의존도가 높은 상황이다. | |
제품 정밀도와 생산성 향상을 위해 무엇이 중요해지고 있는가? | 제품 정밀도와 생산성 향상을 위해 고속프레스의 초고속화 및 초정밀화 기술이 더욱 중요해지고 있다. 그러나 고속프레스는 작동 속도 증가에 따라 슬라이드의 반복 위치 정밀도가 저하되고 프레스 구조 부품의 파손 위험성은 증가하는 것으로 알려져 있다. | |
초정밀 고속프레스 수요가 증가하는 이유? | 반도체장비, 의료기기, 전자기기를 구성하는 각종 부품의 초정밀, 초소형화에 따라 ㎛ 수준의 정밀도를 갖는 초정밀 고속프레스에 대한 수요가 제조 현장을 중심으로 크게 증가하고 있는 상황이고, 미국, 일본, 유럽에서는 1990 년대부터 이 같은 초정밀 고속프레스에 대한 연구 개발을 꾸준히 진행해 왔다. (1,2) 그러나 국내에서는 초정밀 성형 기술과 장비에 대한 원천기술은 활발한 연구가 수행되었으나, (3~6) 제품 양산에 직접 활용되고 있는 프레스 장비를 대상으로 한 상용화 관점의 정밀화 기술 연구는 아직도 상당히 미흡한 상황이다. |
Breitling, J., Wallace, D. and Altan, T., 1996, "Investigation of Different Loading Conditions in a High Speed Mechanical Press," Journal of Materials Processing Technology, Vol. 59, pp. 18-23.
Yang, Z. and Sadler, J. P., 2000, "On Issues of Elastic-Rigid Coupling in Finite Element Modeling of High-Speed Machines," 2000, Mechanism and Machine Theory, Vol. 35, pp. 71-82.
Koo, H. W., Choi, H. J. and Hwang, B. B., 2006, "Mechanical Press Drive with Enhanced Downward Velocity Characteristics," Proceedings of the KSTP 2006 Spring Annual Meeting, pp. 110-120.
Oh, S. I., 2000, "Micro Forming Technology for Ultra Thin Metal Foil," Journal of the KSME, Vol. 46, No. 6, pp. 50-56.
Lee, J. K., Jeon, S. Y., Hahm, J. H. and Kim, K. H., 2001, "Design of a High Precision Press with Vertical Hydrostatic Bearings," Proceedings of the KSME 2001 Spring Annual Meeting, pp. 769-773.
Lee, H. J. and Lee, N. K., 2007, "Research on the Modulating of the Desktop Micro Forming System to Micro Factory," Proceedings of the KSMTE 2007 Fall Annual Meeting, pp. 13-18.
Greco, M. and Coda, H. B., 2006, "Positional FEM Formulation for Flexible Multi-Body Dynamic Analysis," Journal of Sound and Vibration, Vol. 290, pp. 1141-1174.
Yu, Y. Q. and Jiang, B., 2007, "Analytical and Experimental Study on the Dynamic Balancing of Flexible Mechanisms," Mechanism and Machine Theory, Vol. 42, pp. 626-635.
Erkaya, S., Su, S. and Uzmay, I., 2007, "Dynamic Analysis of a Slide-Crank Mechanism with Eccentric Connector and Planetary Gears," Mechanism and Machine Theory, Vol. 42, pp. 393-408.
Son, C. S., Cheon, H. J., Seong, H. G. and Yoon, K. S., 2011, "A Study on the Dynamic Stress Analysis of an Engine Block Using Flexible-Body Dynamic Analysis," Journal of the KSPE, Vol. 28, No. 7, pp. 805-813.
Hwang, W. G., Sung, W. S. and Ahn, K. W., 2011, "Dynamic Analysis of Engine Valve Train with Flexible Multibody Model Considering Contact between Components," Transaction of KSAE, Vol. 19, No. 1, pp. 125-132.
Shin, J. H., Kim, H. K., Song, M. J., Jung, C. J. and Cho, C. D., 2011, "Dynamic Analysis of a High Speed Precision Press By Using a Flexible Crank Shaft Model," Proceedings of the KSPE 2011 Spring Annual Meeting, pp. 563-564.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.