최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.31 no.3, 2014년, pp.215 - 222
(경북대학교 기계공학부) , 양승한 (경북대학교 기계공학부)
This paper presents an experimental study of a vibration-assisted dry micro-wire electrical discharge machining (
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Ho, K. H., Newman, S. T., Rahimifard, S., and Allen, R. D., "State of the Art in Wire Electrical Discharge Machining," International Journal of Machine Tools & Manufacture, Vol. 44, No. 12-13, pp. 1247-1259, 2004.
Jeswani, M. L., "Electrical Discharge Machining in Distilled Water," Wear, Vol. 72, No. 1, pp. 81-88, 1981.
Kunieda, M. and Furudate, C., "High Precision Finish Cutting by Dry WEDM," CIRP Annals - Manufacturing Technology, Vol. 50, No. 1, pp. 121-124, 2001.
Kunleda, M., Miyoshi, Y., Takaya, T., Nakajima, N., ZhanBo, Y., and Yoshida, M., "High Speed 3D Milling by Dry EDM," CIRP Annals - Manufacturing Technology, Vol. 52, No. 1, pp. 147-150, 2003.
ZhanBo, Y., Takahashi, J., and Kunieda, M., "Dry Electrical Discharge Machining of Cemented Carbide," Journal of Materials Processing Technology, Vol. 149, No. 1-3, pp. 353-357, 2004.
Kao, C. C., Tao, J., and Shih, A. J., "Near Dry Electrical Discharge Machining," International Journal of Machine Tools and Manufacture, Vol. 47, No. 15, pp. 2273-2281, 2007.
Saha, S. K. and Choudhury, S. K., "Experimental Investigation and Empirical Modeling of the Dry Electric Discharge Machining Process," International Journal of Machine Tools and Manufacture, Vol. 49, No. 3-4, pp. 297-308, 2009.
Fujiki, M., Ni, J., and Shih, A. J., "Investigation of the Effects of Electrode Orientation and Fluid Flow Rate in Near-dry EDM Milling," International Journal of Machine Tools and Manufacture, Vol. 49, No. 10, pp. 749-758, 2009.
Govindan, P. and Joshi, S. S., "Experimental Characterization of Material Removal in Dry Electrical Discharge Drilling," International Journal of Machine Tools and Manufacture, Vol. 50, No. 5, pp. 431-443, 2010.
Joshi, S., Govindan, P., Malshe, A., and Rajurkar, K., "Experimental Characterization of Dry EDM Performed in a Pulsating Magnetic Field," CIRP Annals - Manufacturing Technology, Vol. 60, No. 1, pp. 239-242, 2011.
Kremer, D., Lebrun, J. L., Hosari, B., and Moisan, A., "Effects of Ultrasonic Vibrations on the Performances in EDM," Annals of the CIRP, Vol. 38, No. 1, pp. 199-202, 1989.
Xu, M. G., Zhang, J. H., Li, Y., Zhang, Q. H., and Ren, S. F., "Material Removal Mechanisms of Cemented Carbides Machined by Ultrasonic Vibration-assisted EDM in Gas Medium," Journal of Materials Processing Technology, Vol. 209, No. 4, pp. 1742-1746, 2009.
Hoang, K. T. and Yang, S. H., "A Study on the Effect of Different Vibration-assisted Methods in Micro-WEDM," Journal of Materials Processing Technology, Vol. 213, No. 9, pp. 1616-1622, 2013.
DiBitonto, D. D., Eubank, P. T., Patel, M. R., and Barrufet, M. A., "Theoretical Models of the Electrical Discharge Machining Process. I. A Simple Cathode Erosion Model," Journal of Applied Physics, Vol. 66, pp. 4095-4103, 1989.
Wong, Y. S., Rahman, M., Lim, H. S., Han, H., and Ravi, N., "Investigation of Micro-EDM Material Removal Characteristics using Single RC-pulse Discharges," Journal of Materials Processing Technology, Vol. 140, No. 1-3, pp. 303-307, 2003.
Husain, E. and Nema, R. S., "Analysis of Paschen Curves for Air, N2 and SF6 Using the Townsend Breakdown Equation," IEEE Transactions on Electrical Insulation, Vol. 17, No. 4, pp. 350-353, 1982.
Myers, R. H. and Montgomery, D. C., "Response Surface Methodology: Process and Product Optimization using Designed Experiments," 2nd ed., Wiley, pp. 321-335, 2002.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.