최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국안전학회지 = Journal of the Korean Society of Safety, v.29 no.2, 2014년, pp.53 - 61
이선우 (현대건설) , 원정훈 (충북대학교 안전공학과) , 마호성 (호서대학교 토목공학과)
This study evaluated wind loads considering a local basic wind velocity and construction periods to define the level of applied wind loads for system supports. Structural responses of system supports were examined and compared to those of system supports with the level of wind loads following variou...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
설계기준에서 정하는 풍하중의 수준은? | 설계기준에서 정하는 풍하중의 수준은 영구 구조물 기준이며, 바람의 재현기간은 100년을 기본으로 하고 있다. 반면, 시공 중 구조시스템과 완성단계 구조시스템이 달라 공사기간을 반영할 필요가 있는 특수 교량등에서는 공사기간을 반영한 풍하중 재현기간을 산정하고, 이를 바탕으로 다음 식 (4)와 같이 시공 중 풍속 기대치(Vc)를 산정할 수 있다13). | |
가설 구조물의 사용 문제점은? | 대표적인 가설 구조물의 기준인 가설공사표준시방서3)에서는 건축구조기준1)에 근거한 풍하중 수준을 정의하고 있으며, 또한 콘크리트 교량 가설용 동바리 설치지침4)에서는 풍하중과 같이 가설 작업 중 특수하게 발생하는 수평하중의 영향은 별도로 고려하도록 하고 있다. 그러나 대부분의 현장에 적용되는 시스템 동바리는 풍하중에 대한 검토 없이 고정하중만 고려하여 안전성을 검토한 후 사용되고 있다. 일부 기술팀을 갖고 있는 회사에서는 3차원 구조해석을 통해 풍하중을 구조검토에 반영하고 있으나 적용 풍하중의 수준에 대한 명확한 기준 없이 영구 구조물의 설계 풍압을 적용 하고 있다. | |
가설공사표준시방서에서는 어떻게 풍하중 수준을 정하는가? | 대표적인 가설 구조물의 기준인 가설공사표준시방서3)에서는 건축구조기준1)에 근거한 풍하중 수준을 정의하고 있으며, 또한 콘크리트 교량 가설용 동바리 설치지침4)에서는 풍하중과 같이 가설 작업 중 특수하게 발생하는 수평하중의 영향은 별도로 고려하도록 하고 있다. 그러나 대부분의 현장에 적용되는 시스템 동바리는 풍하중에 대한 검토 없이 고정하중만 고려하여 안전성을 검토한 후 사용되고 있다. |
Ministry of Land, Transport and Maritime Affairs, "Korean Building Code", 2009.
Ministry of Land, Transport and Maritime Affairs, "Korean Design Code for Highway Bridge", 2010.
Korea Temporary Equipment Association, "Standard Specification for Temporary Work", 2010.
Ministry of Construction and Transportation, "Support Installing Guide for Concrete Bridge Construction", 2007.
S. K. Cho, Y. C. Ha, J. R. Kim, and K. S. Kim, "Evaluation the wind-induced Response of Tall Building Changed by Arrangements of the Buildings", Journal of Korean Society of Steel Construction, Vol. 16, No. 3, pp. 305-314, 2004.
D. H. Kim, J. K. Lim and J. P. Koh, "Reliability Analysis of LNG Unloading Arm considering Variability of Wind Load", Journal of Korean Society of Steel Construction, Vol. 19, No. 2, pp. 223-231, 2007.
S. W. Choi and H. K. Kim, "Aerodynamic Design Procedure of a Cable-stayed Bridge in Construction Based on a Buffeting Analysis", Journal of the Korean Society of Civil Engineers, Vol. 27, No. 4A, pp. 493-503, 2007.
J. H. Park, Y. B. Chung and Y. C. Ha, "A Proposal of the Wind Pressure Coefficient and Simplified Wind Load Estimation Formula for the Design of Structural Frames of the Low-rise Buildings", Journal of Korean Society of Steel Construction, Vol. 21, No. 3, pp. 289-299, 2009.
D. H. Kim, I. K. Lee and B. Y. Jo, "Wind Induced Risk Analysis of Highway Facilities", Journal of Korean Society of Steel Construction, Vol. 21, No. 6, pp. 553-561, 2009.
S. S. Lee, H. S. Kim, Y. K. Lee and K. C. Shim, "Risk Assesment of Strong Wind over Industrial Facilities in Shipyards", Journal of the Korean Society of Hazard Mitigation, Vol. 9, No. 4, pp. 21-28, 2009.
S. H. Choi, K. S. Seo, I. H. Sung and S. H. Lee, "Estimation of Basic Wind Speeds Reflecting Recent Wind Speed Data", Journal of the Korean Society of Hazard Mitigation, Vol. 10, No. 1, pp. 9-14, 2010.
S. Y. Jeong, K. S. Lee and S. E. Han, "A Numerical Study on Wind Pressure Characteristics of Super-tall Protype Model considering the Effect of Turbulence Intensity", Journal of Korean Society of Steel Construction, Vol. 23, No. 6, pp. 659-667, 2011.
Korean Society of Civil Engineers, "Design Guide for Steel cable-supported Bridge", 2006.
Japan Road Association, "Manual for Wind Resistant Design of Highway Bridges", 2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.