최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.51 no.3, 2014년, pp.201 - 207
김경인 (한국세라믹기술원 이천분원) , 최성철 (한양대학교 신소재공학부) , 김진호 (한국세라믹기술원 이천분원) , 황광택 (한국세라믹기술원 이천분원) , 한규성 (한국세라믹기술원 이천분원)
High-purity aluminum nitride nanopowders were synthesized using an RF induction thermal plasma instrument. Ammonia and nitrogen gases were used as sheath gas to control the reactor atmosphere. Synthesized AlN nanopowders were characterized by XRD, SEM, TEM, EDS, BET, FTIR, and N-O analyses. It was p...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
직접질화법의 단점은? | 현재 산업에서 사용되고 있는 대표적인 AlN 분말 합성 방법인 직접질화법(Direct nitridation)은 Al 분말을 용융 온도보다 높은 온도에서 질소(N2)와 반응시켜 괴 형태로 합성하는 방법이다.7) 합성된 AlN을 미분화하기 위해 분쇄 공정이 필수적이며 이 과정에서 다량의 불순물이 혼입되어 순도가 낮아지고 균일한 입도분포를 얻기 힘든 문제점이 있다.8) 또한 열탄소환원질화법(Cabothermal reduction nitridation)은 알루미나에 탄소를 혼합하여 질소분위기에서 열처리 하여 균일한 입도분포의 AlN 분말 합성이 가능하나 고순도의 알루미나 전구체를 사용해야 하고 합성 후 잔류카본을 제거하기 위해 산화공정이 추가적으로 필요하다. | |
직접질화법이란? | 현재 산업에서 사용되고 있는 대표적인 AlN 분말 합성 방법인 직접질화법(Direct nitridation)은 Al 분말을 용융 온도보다 높은 온도에서 질소(N2)와 반응시켜 괴 형태로 합성하는 방법이다.7) 합성된 AlN을 미분화하기 위해 분쇄 공정이 필수적이며 이 과정에서 다량의 불순물이 혼입되어 순도가 낮아지고 균일한 입도분포를 얻기 힘든 문제점이 있다. | |
열 플라즈마 합성법의 장점은? | 열 플라즈마 합성법은 고상, 액상, 기상의 다양한 출발 원료를 사용할 수 있으며 고온의 플라즈마에 의해 반응속도가 매우 짧고 빠른 냉각 속도에 의해 균일한 입도의 합성물을 얻을 수 있는 특징이 있다.6,14-19) 대표적인 열 플라즈마 토치는 직류 아크 플라즈마(DC arc plasma)와 유도결합 플라즈마(Induction plasma)로 구분된다. |
R. Pool, "Clusters: Strange Morsels of Matter," Science, 248 [4960] 1186-88 (1990).
A. P. Alivisators, "Semiconductor Clusters, Nanocrystals, and Quantum Dots," Science, 271 [5251] 933-37 (1996).
G. A. Slack, R. A. Tanzilli, R. O. Pohl, and J. W. Vandersande, "The Intrinsic Thermal Conductivity of AlN," J. Phys. Chem. Soli., 48 [7] 641-47 (1987).
A. V. Virkar, T. B. Jackson, and R. A. Cutler, ''Thermo-dynamic and Kinetic Effects of Oxygen Removal on the Thermal Conductivity of Aluminum Nitride," J. Am. Ceram. Soc., 72 [11] 2031-42 (1989).
N. Kuramoto, H. Taniguchi, and I. Aso "Translucent AlN Ceramic Substrate," IEEE Trans. Compon. Hybrids Manuf. Technol., 9 386-90 (1986).
H. Ahn, M. Hur, and S. H. Hong, "Synthesis of Ultrafine Powders for Aluminum Nitride by DC Thermal Plasma," J. Kor. Insti. Sur. Eng., 29 [1] 45-59 (1996).
T. Okada, M. Toriyama, and S. Kanzaki, "Direct Nitridation of Aluminum Compacts at Low Temperature," J. Mater. Sci., 35 [12] 3105-11 (2000).
N. Hashimoto, H. Yoden, and S. Deki, "Effect of Milling Treatment on the Particle Size in the Preparation of AIN Powder from Aluminum Polynuclear Complexes," J. Am. Ceram. Soc., 76 [2] 438-42 (1993).
S. H. Lee, J. H. Yi, J. H. Kim, Y. N. Ko, Y. J. Hong, and Y. C. Kang, "Preparation of Nanometer AlN Powders by Combining Spray Pyrolysis with Carbothermal Reduction and Nitridation," J. Ceram. Inter., 37 [6] 1967-71 (2011).
T. Yamakawa, J. Tatami, T. Wakihara, K. Komeya, and T. Meg, "Synthesis of AlN Nanopowder from c- $Al_2O_3$ by Reduction-nitridation in a Mixture of $NH_3-C_3H_8$ ," J. Am. Ceram. Soc., 89 [1] 171-75 (2006).
B. C. Di Lello, F. J. Moura, and I. G. Solorzano, "Synthesis and Characterization of Nano-scale Aluminum Nitride Produced from Vapor Phase," J. Mater. Scien. Eng., 15 [1-2] 67-69 (2001).
M. C. Wang, M. S. Tsai, and N. C. Wu, "Effect of Heat Treatment on Phase Transformation of Aluminum Nitride Ultrafine Powder Prepared by Chemical Vapor Deposition," J. Crys. Grow., 210 [4] 487-95 (2000).
M. Yamada, T. Yasui, M. Fukumoto, and K. Takahashi, "Nitridation of Aluminum Particles and Formation Process of Aluminum Nitride Coatings by Reactive RF Plasma Spraying," J. Thin Solid Films, 515 [9] 4166-71 (2007).
S. M. Oh and D. W. Park, "Preparation of AlN Fine Powder by Thermal Plasma Processing," Thin Solid Films, 316 [1-2] 189-94 (1998).
N. S. Kanhe, A. B. Nawale, R. L. Gawade, V. G. Puranik, S. V. Bhoraskar, A. K. Das, and V. L. Mathe, "Understanding the Growth of Micro and Nano-crystalline AlN by Thermal Plasma Process," J. Crys. Grow., 339 [1] 36-45 (2012).
B. H. Li, H. Yang, G. Zou, and S. Yu, "Ultrafine AIN and Al-AlN Powders: Preparation by DC Arc Plasma and Thermal Treatment," J. Advan. Mater., 9 [2] 156-59 (1991).
K. Etemadi, "Formation of Aluminum Nitrides in Thermal Plasmas," Plasma Chem. Plasma Process., 11 [1] 41-56 (1991).
H. D. Li, G. T. Zou, H. Wang, H. B. Yang, D. M. Li, M. H. Li, and S. Yu, "Synthesis and Infrared Study of Nanosized Aluminum Nitride Powders Prepared by Direct Current arc Plasma," J. Phys. Chem. B, 102 [44] 8692-95 (1998).
P. C. Kong and Y. C. Lau, "Plasma Synthesis of Ceramic Powders," J. Pure &App. Chem., 62 [9] 1809-16 (1990).
J. Guo, X. Fan, R. Dolbec, S. Xue, J. Jurewicz, and M. Boulos, "Development of Nanopowder Synthesis Using Induction Plasma," Plasma Sci. Technol., 12 [2] 188-99 (2010).
R. Dolbec, M. Bolduc, X. Fan, J. Guo, J. Jurewicz, T. Labrot, S. Xue, and M. Boulos, "Nanopowders Synthesis at Industrial-scale Production Using the Inductively Coupled Plasma Technology," NSTI-Nanotech 2008 Proceedings, 1 672-75 (2008).
Fact Sage, Software Program, Version 6.2, CRCT-Therm-Fact Inc. & GTT-Technologies, Canada & Germany, 2010.
C. Papelis, W. Um, C. E. Russell, and J. B. Chapman, "Measuring the Specific Surface Area of Natural and Manmade Glasses: Effect of Formation Process, Morphology, and Particle Size," Colloids Surf. A, 215 [1-3] 221-239 (2003).
M. L. Panchula and J. Y. Ying, "Nanocrystalline Aluminum Nitride: I, Vapor-Phase Synthesis in a Forced-Flow Reactor," J. Am. Ceram. Soc., 86 [7] 1114-20 (2003).
C. H. Li, L. H. Kao, M. J. Chen, Y. F. Wang, and C. H. Tsai, "Rapid Preparation of Aluminum Nitride Powders by Using Microwave Plasma," J. Allo. Comp., 542 [25] 78-84 (2012).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.