최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.25 no.4, 2014년, pp.401 - 408
김대천 (서울과학기술대학교 에너지환경대학원) , 정건용 (서울과학기술대학교 화공생명공학과)
In membrane bio-reactor (MBR), the aeration control is one of the important independent variables to decrease fouling and to save energy with shear stress change on the membrane surface. The paper was carried out for numerical simulation of 3-dimensional fluid flow phenomena of the cylindrical biore...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
분리막 생물반응기 기술의 장점은 무엇인가? | 분리막 생물반응기(Membrane Bio-Reactor, MBR) 기술은 20여년 동안 에너지 절감과 분리막 가격하락 등으로 운전비 및 시설투자비의 절감과 재래식 활성슬러지 공정보다 소요 부지면적이 적고 높은 처리 수질의 장점으로 인하여 하⋅폐수처리 분야에 폭넓게 사용되고 있다. 하지만 MBR 공정에서 액체를 분리하기 위하여 사용하는 분리막은 공정원리 상 분리막 근방의 농도분극 내지는 막오염 현상이 불가피하게 발생하므로 이를 최소화시키는 운전기법에 대해서 다양한 연구가 진행되고 있다[1-2]. | |
MBR 반응조 및 모듈의 최적화를 달성할 목적으로 이용되는 모델링은 무엇인가? | 이러한 유체역학적인 원리를 이용하여 MBR 반응조 및 모듈의 최적화를 달성할 목적으로 CFD(Computational Fluid Dynamics) 프로그램을 이용한 모델링이 적용되고 있다. 최근 제품설계와 산업현장에서도 3차원 설계를 기본으로 채택하고 있어 이와 연계할 목적으로 CFD도 3차원 모델로 많은 연구가 진행되기도 한다[5-8]. | |
분리막 생물반응기의 단점은 무엇인가? | 분리막 생물반응기(Membrane Bio-Reactor, MBR) 기술은 20여년 동안 에너지 절감과 분리막 가격하락 등으로 운전비 및 시설투자비의 절감과 재래식 활성슬러지 공정보다 소요 부지면적이 적고 높은 처리 수질의 장점으로 인하여 하⋅폐수처리 분야에 폭넓게 사용되고 있다. 하지만 MBR 공정에서 액체를 분리하기 위하여 사용하는 분리막은 공정원리 상 분리막 근방의 농도분극 내지는 막오염 현상이 불가피하게 발생하므로 이를 최소화시키는 운전기법에 대해서 다양한 연구가 진행되고 있다[1-2]. 그중 호기성 반응조를 근간으로 하는 MBR에서는 산기를 통하여 DO와 유속을 제어하여 막오염 문제를 개선시키고 있다. |
S. Judd, The MBR Book: Principles and Applications of Membrane Bioreactors in Water and Wastewater Treatment, 90-101, Elsevier Science, Oxford, UK (2008).
I. H. Cho and J. T. Kim, Trends in the technology and market of membrane bioreactors (MBR) for wastewater treatment and reuse and development rirections, Membrane J., 23, 24-44 (2013).
K. Y. Chung and J. P. Kim, Energy Saving Membrane Technology, 25-61, A-jin Co., Seoul, Korea (2010).
R. B. Bird, W. E. Sewart, and E. N. Lightfoot, Transport Phenomena, 2nd ed., 152-176, John Wiley & Sons, Inc., New York, USA (2001).
X. Yang, H. Yu, R. Wang, and A. G. Fane, Optimization of microstructured hollow fiber design for membrane distillation applications using CFD modeling, J. Membrane Sci., 422, 258-270 (2012).
Y. Wibisono, E. R. Cornelissen, A. J. B. Kemperman, W. G. J. van der Meer, and K. Nijmeijer, Two-phase flow in membrane processes: a technology with a future, J. Membrane Sci., 453, 566-602 (2014).
A. Drews, H. Prieske, E. L. Meyer, G. Senger, and M. Kraume, Advantageous and detrimental effects of air sparging in membrane filtration: bubble movement, exerted shear and particle classification, Desalination, 250, 1083-1086 (2010).
H. C. Shin and K. Y. Chung, Numerical analysis of concentration polarization for spacer configuration in plate type membrane module, App. Chem. Eng., 22(6), 703-710 (2011).
Y. Noh, Turbulence, 20-65, Sigma Press, Seoul, Korea (2000).
COMSOL Inc., COMSOL Multiphysics User's Guide, 34-67, ver. 4.3, Palo Alto, USA (2012).
S. Becker, A. Sokolichin, and G. Eigenberger, Gas-liquid flow in bubble columns and loop reactors: part II. comparison of detailed experiments and flow simulations, Chem. Eng. Sci., 49, 5747-5762 (1994).
D. Kuzmin and S. Turek, Flux correction tools for finite elements. J. Comput. Phys., 175, 525-558 (2002).
B. E. Launder and D. B. Spalding, The numerical computation of turbulent flows, Comp. Meth. Appl. Meth. Eng., 3, 269-289 (1974).
F. L. Wattendorf and A. M. Kuethe, Investigations on turbulent flow by means of the hot-wire anemometer, Physics, 5, 153 (1934).
W. L. McCabe, J. C. Smith, and P. Harriott, Unit Operations of Chemical Engineering, 7th ed., 51-58, McGraw-Hill, New York, USA (2001).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.