최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of Korean Society of Industrial and Systems Engineering = 한국산업경영시스템학회지, v.37 no.2, 2014년, pp.70 - 76
김연수 (인천대학교 산업경영공학과) , 정영배 (인천대학교 산업경영공학과)
In industrial situation, electronic and electro-mechanical systems have been using different type of batteries in rapidly increasing numbers. These systems commonly require high reliability for long periods of time. Wider application of battery for low-power design as a prime power source requires u...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
배터리의 사용분야는 어떠합니까? | 배터리는 교통, 신재생 에너지, 전력 저장, 전력 균형, 대체 장치 및 연속 전원공급기와 같이 다양한 분야에서 점차 사용이 증가되고 있다. 전기 자동차, 철도, 해양 및 항공 운송의 안전 및 신뢰성은 사용되는 배터리의 품질에 의존하고 있다[1]. | |
전지는 1차 전지와 2차 전지로 구분되는 데 각각의 특징은 무엇입니까? | 전지는 1차 전지와 2차 전지로 구분한다. 1차 전지는 충전이 불가능해 1회 사용으로 수명이 다하는 전지를 말하는데 여기서는 ‘일반형 전지’로 구분한다. 2차 전지는 용량이 다되면 충전시켜 다시 사용할 수 있는 전지를 말하며 여기서는 ‘충전형 전지’로 구분한다[3]. | |
배터리의 신뢰성이 매우 중요한 이유는 무엇입니까? | 또한 배터리는 에너지소스 원으로써 다양한 산업용 전자 또는 전자기계 시스템에 적용되어 사용되며 그러한 시스템의 기능적 역할에 핵심 부분을 담당하고 있으며, 일상생활에서 그 사용량도 날로 증가함에 따라 배터리의 안전, 성능 및 내구성이 매우 중요하게 되었다. 따라서 배터리의 고장 또는 성능 저하는 관련 시스템의 성능 및 운영 능력 손상을 가져 올 수 있으며, 돌발적인 고장을 야기 할 수 있어 배터리의 신뢰성은 매우 중요하다[4, 12]. |
Electropaedia, Battery and Energy Technology, http:// www.mpoweruk.com.
Goebel, K., Saha, B., Saxena, A., Celaya, J.R., and Christophersen, J., Prognostics in Battery Health Management. Instrumentation and Measurement Magazine, IEEE, 2008, Vol. 11, No. 4, p 33-40.
Lewis, E.E., Introduction to Reliability Engineering, $2^{nd}$ ed., New York, John Wiley and Sons, 1992.
Kim, Y.S. and Chung, Y.B., Performance Reliability Monitoring and Prediction. Journal of the Korean Institute of Plant Engineering, 1998, Vol. 3, No. 2, p 373- 386.
Kim, Y.S. and Chung, Y.B., A Study on Non-Operting Reliability Analysis. Journal of the Korean Institute of Plant Engineering, 2013, Vol. 18, No. 3, p 5-13.
Kim, Y.S. and Chung, Y.B., Condition Parameter-based On-line Performance Reliability. Journal of the Society of Korea Industrial and Systems Engineering, 2007, Vol. 30, No. 3, p 103-108.
Knezevic, J., Condition Parameter Based Approach to Calculation of Reliability Characteristics. Reliability Engineering, Vol. 19, p 29-39.
Kumar, D., Proportional Hazards Modelling of Repairable Systems. Quality and Reliability Engineering International, 1995, Vol. 11, p 361-369.
Meeker, W.Q. and Escobar, L.A., Accelerated Degradation Tests : Modeling and Analysis. Technometrics, 1998, Vol. 40, No. 2, p 89-99.
Pau, L.F., Failure Diagnosis and Performance Monitoring, New York, Marcel Dekker, 1981.
Park, D.H, Baik J.W., Park, J.W., Song, B.S., Reliability Engineering, KNOU Press, 2010.
Saha, B., Goebel, K., Poll, S., and Christophersen, J., Prognostics Methods for Battery Health Monitoring Using a Bayesian Framework. IEEE Transactions on Instrumentation and Measurement, 2009, Vol. 58, No. 2, p 291-296.
Yang, G.B., Life Cycle Reliability Engineering, Wiley and Sons, 2007.
Yinjiao Xing, Qiang Miao, Tsui, K.-L., and Pecht, M., Prognostics and Health Monitoring for Lithium-ion Battery, Intelligence and Security Informatics(ISI), IEEE International Conference, 2011, p 242-247.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.