최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.27 no.5, 2014년, pp.459 - 467
이환우 (부경대학교 토목공학과) , 박용진 (부경대학교 토목공학과)
ILM(Incremental Launching Method) bridges pass both the middle of spans and supports during launching. The launching noses are used to minimize the maximum positive moments and negative moments of the superstructure occurring during launching for ILM bridges. In this study, the simplified analysis f...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
ILM 교량 상부구조물 단면의 최적설계를 위해서는 무엇이 필수적인가? | ILM 교량 상부구조물 단면의 최적설계를 위해서는 압출추진코와의 상호작용이 고려된 해석과 압출추진코의 최적설계가 필수적이다(Rosignoli, 1999). 이를 위해서는 다양한 설계변수 해석이 요구된다. | |
ILM 교량의 단면은 어떤 특성을 가지는가? | ILM 교량은 압출되는 동안 상부의 단면이 지간의 중앙부와 지점부를 모두 통과한다. 따라서 단면들은 자중에 의한 최대 정모멘트 및 최대 부모멘트를 모두 경험하는 구조적 특성을 가진다. 이 일시적인 응력을 효과적으로 제어하기 위해서 다양한 방법이 있으며, 이중에서 압출추진코를 이용하여 캔틸레버 작용을 감소시키는 방법이 대표적으로 사용되고 있다(Rosignoli, 2000; Sasmal et al. | |
ILM 교량 상부구조물 단면의 최적설계를 위해 수행된 연구는 무엇이 있는가? | 압출추진코의 최적설계를 위한 최적화 기법(Fontan et al., 2011)이나, 상부구조와 압출추진코의 상호작용이 고려된 ILM 상부구조 단순 해석식(Rosignoli, 1998; Lee et al., 2006; 2012) 및 예비설계용 최적화 설계식(Lee et al., 2006; Choi et al., 2008)에 관한 연구가 수행되었다. Rosignoli(1998)는 압출추진코의 강성과 중량을 모두 등단면으로 가정한 해석식을 사용하여 압출추진코의 최적길이비를 제시하였다. Choi(2008)은 Rosignoli(1998)와 동일한 해석식을 사용하여 최적길이비를 부모멘트 최소화 조건 및정모멘트 최소화 조건에 따라 각각 제시하였다. 또한 Lee 등 (2006)의 연구에서 압출추진코의 강성과 중량을 모두 변단면으로 적용한 해석식 및 설계식이 제시되었다. 그러나 선행 연구들에서는 상부구조물과 압출추진코의 연결부 보강단면인 다이아프램을 고려하지 않았거나, 다이아프램이 고려된 기초 연구만 있었다. |
Choi, H.Y., Suh, S.K., Oh, M.S., Oh, S.H. (2008) Techniques of Optimizing the Launching Nose under Conditions of Minimizing the Launching Bending Moment, J. Korean Soc. Civ. Eng., 28(A4), pp.487-495.
Fontan, Arturo N. (2011) Improved Optimization Formulations for Launching Nose of Incrementally Launched Prestressed Concrete Bridges, J. Bridge Eng., 16, pp.461-470.
Fontan, Arturo N. (2014) Simultaneous Cross Section and Launching Nose Optimization of Incrementally Launched Bridges, J. Bridge Eng., 19(3), p.04013002.
Lee, H.W., Jung, D.H., Ahn, T.W. (2006) Interaction Analysis between Tapered Sectional Launching Nose and Superstructure Section of ILM Concrete Bridge, J. Comput. Struct. Eng. Inst. Korea, 19(2), pp.139-150.
Lee, H.W., Jang, J.Y. (2010) Design Formula for Launching Nose of ILM Bridge Considering the Interaction Behavior with Superstructure Section, J. Comput. Struct. Eng. Inst. Korea, 23(1), pp.53-60.
Rosignoli, M. (1998) Nose-Deck Interaction in Launched Prestressed Concrete Bridges, J. Bridge Eng., 3(1), pp.21-27.
Rosignoli, M. (1999) Prestressing Schemes for Incrementally Launched Bridges, J. Bridge Eng., 4(2), pp.107-115.
Rosignoli, M. (2000) Thrust and Guide Devices for Launched Bridges, J. Bridge Eng., 5(1), pp.75-83.
Rosignoli, M. (2002) Bridge Launching, Thomas Telford Ltd, London.
Sasmal, S., Ramanjaneyulu, K., Srinivasm, V., Gopalakrishnan, S. (2004) Simplified Computational Methodlogy for Analysis and Studies on Behaviour of Incrementally Launched Continuous Bridges, Struct. Eng. & Mech., 17(2), pp.245-266.
Sasmal, S., Ramanjaneyulu, K. (2006) Transfer Matrix Method for Construction Phase Analysis of Incrementally Launched Prestressed Concrete Bridges, Eng. Struct., 28, pp.1897-1910.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.