최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기복합신소재구조학회 논문집 = Journal of the Korean Society for Advanced Composite Structures, v.6 no.1, 2015년, pp.51 - 58
김구 (한진중티엠에스) , 김도균 (PETRONAS 공과대학교) , 최한석 (포항공과대학교) , 박규식 (포스코)
Global buckling is a bending of pipeline and it occurs when the stability of pipeline is distributed by excessive axial force. Subesea pipeline is subjected to axial force induced by temperature and pressure from well and resulting phenomena should be controlled in appropriate manner. Global bucklin...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
파이프라인의 구조적 안정성을 위해 고려되어야 하는 변수는 무엇인가? | 파이프라인은 생산된 오일과 가스를 안전하고 효율적으로 수송할 수 있도록 설계되어야 한다. 또한, 파이프라인은 사용연한 동안 구조적 안정성을 확보해야 하며 비용, 일정, 확장성, 신뢰성, 시공성, 유연성 등의 다양한 변수고려가 요구된다. 해양구조물 설계를 위해서는 직경, 설계압력, 설계온도, 압력 및 온도 형상, 환경하중, 지반 물성치, 유체특성성 등이 필요하다. | |
해저 파이프라인의 좌굴 중 전체좌굴의 원인은 무엇인가? | 전체좌굴은 파이프라인의 온도, 압력, 설치시 잔류 인장력 등에 의한 압축력 때문에 발생하며, 심해 개발로 인해 Fig. 1과 같이 고온고압의 유정의 개발이 늘어나면서, 이러한 전체좌굴에 의한 파이프라인의 파괴 가능성은 점차 증가하고 있다. | |
해양구조물 설계를 위해 필요한 것은 무엇인가? | 또한, 파이프라인은 사용연한 동안 구조적 안정성을 확보해야 하며 비용, 일정, 확장성, 신뢰성, 시공성, 유연성 등의 다양한 변수고려가 요구된다. 해양구조물 설계를 위해서는 직경, 설계압력, 설계온도, 압력 및 온도 형상, 환경하중, 지반 물성치, 유체특성성 등이 필요하다. 또한, 파이프라인과 관계된 설계기준에서는 파이프의 설치경로, 부식, 직경, 파열, 붕괴, 국부좌굴, 안정성, 자유경간, 변형, 전체좌굴, 축방향 워킹(Walking), 피로 등을 검토하는 것을 제시하고 있다 (API 2009, DNV 2007). |
Anunes, B., Solano, R., and Vaz, M. (2010), "Analytical Formulation of Distributed Buoyancy Sections to Control Lateral Buckling of Subsea Pipelines," Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering, Shanghai, China.
API (2009), "Design, Construction, Operation and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design)," API-RP-1111, American Petroleum Institute, USA.
Aubeny, C. P., Shi, H., and Murff, J. (2005), "Collapse Loads for a Cylinder Embedded in Trench in Cohesive Soil," International Journal of Geomechanics, 5, pp. 320-325.
Bai, Q., Qi, X., and Brunner, M. (2009), "Global Buckle Control with Dual Sleepers in HP/HT Pipelines," Proceedings of Offshore Technology Conference, TX, USA.
Baird, T., Drummond, T. R., Mathison, D., and Langseth, B. (1993), "High Pressure, High Temerature Well Logging, Perforating and Testing," Schlumberger, USA.
DNV (2007), "Global Buckling of Submarine Pipelines," DNV-RP-F110, Det Norske Veritas, Norway.
Guan, J., Hansen, H. F., and Nystrom, P. R. (2007), "Optimized Solutions to Control Lateral Buckling of Pipelines with Snake Lay," Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering, Trondheim, Norway.
Hobb, R. (1984), "In-Services Buckling of Heated Pipelines," Journal of Transportation Engineering, 110(2), pp. 175-189.
Kyriakides, S., and Corona, E. (2007), "Mechanics of Offshore Pipelines: Volume 1: Buckling and Collapse," Elsevier, USA.
Liu, U., Li, X., and Zhou, J. (2012), "Post-buckling Studies on Snaked Lay Pipeline with New Shape,"Journal of Information and Computational Scicence, 9, pp. 3315-3324.
Matheson, I., Carr, M., Peek, R., Saunders, P., and George, N. (2004), "Penguins Flowline Lateral Buckle Formation Analysis and Verification," Proceeding of the International Conference on Offshore Mechanics and Arctic Engineering, Vancouver, Canada.
Murff, J., Wagner, D., and Randolph, M. (1989), "Pipe Penetration in Cohesive Soil," Geotechnique, 39, pp. 213-29.
Palmer, A. (1974), "Lateral Buckling of Axially Constrained Pipes," Journal of Petroleum Technology, 26. pp. 1283-1284.
Randolph, M., and White, D. (2008), "Pipeline Embedment in Deepwater: Processes and Quantitate Asessment," Proceedings of Offshore Technology Conference, TX, USA.
Rundsag, J. (2008), "Optimized Snaked Lay Geometry," Proceedings of the International Offshore and Ploar Engineering Conference, Vancouver, Canada.
Safebuck (2015). http://www.safebuck.com/
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.