최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기목재공학 = Journal of the Korean wood science and technology, v.43 no.3, 2015년, pp.390 - 399
This study was conducted to examine the potential use of coffee waste (CW) as an adsorbent of HCHO by adding into fiberboard. For the purpose, CW treated with various temperatures and times was placed in desiccator with a HCHO solution and then the HCHO adsorptivity of the CW was measured by acetyla...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
아미노계 접착제를 적용시켜 제조한 목질보드 제품에서 발생하는 폼알데하이드 방산량을 저감시키는 기술에는 어떤 종류가 있는가? | 아미노계 접착제를 적용시켜 제조한 목질보드 제품에서 발생하는 폼알데하이드 방산량을 저감시키는 기술에는 천연계 대체 접착제의 사용(Yang et al. 2006; Yang et al. 2009; Yang et al. 2012), 접착제 제조시 포르알데히드 몰비 저감(Que et al. 2007), 다단 합성에 의한 접착제 제조(Lee et al. 2010), 포착제 첨가(Kim et al. 2008) 등과 같은 화학적인 방법과 도장 및 overlay와 같은 물리적인 방법(Park et al. 2004) 등이 개발 또는 사용되고 있다. 그러나 이와 같은 방법을 이용하여 제조한 목질보드 제품은 강도의 저하 및 제조원가의 상승을 초래할 것으로 판단 되며, 따라서 이러한 문제점을 해결하면서 폼알데하이드 방산량을 저감시킬 수 있는 효율적인 방안에 대한 기술 개발이 필요한 실정이다. | |
커피부산물은 무엇인가? | 상기의 모든 목적들을 충족시킬 수 있는 방안을 탐색하는 과정에서 인스턴트 및 원두 커피 제조시에 발생하는 커피부산물의 이용에 대한 가능성을 확인하는 연구가 필요할 것으로 판단하였으며, 그 이유는 다음과 같다. 먼저 커피부산물(coffee waste)은 인스턴트 및 원두 커피의 제조 공정에서 발생하는 폐기물로써, 커피 진액을 추출하고 남은 찌꺼기이다. 따라서 그 발생량은 1톤의 원두에서 약 480 kg 정도에 달하는데 2009년 기준으로 전 세계적으로 730만톤의 생두가 수확되었으므로(ICO 2013), 연간 약 350만 톤의 커피부산물의 확보가 산술적으로 가능 하다. | |
인스턴트 및 원두 커피 제조시 발생하는 커피부산물은 1톤의 원두에서 어느 정도를 얻을 수있는가? | 먼저 커피부산물(coffee waste)은 인스턴트 및 원두 커피의 제조 공정에서 발생하는 폐기물로써, 커피 진액을 추출하고 남은 찌꺼기이다. 따라서 그 발생량은 1톤의 원두에서 약 480 kg 정도에 달하는데 2009년 기준으로 전 세계적으로 730만톤의 생두가 수확되었으므로(ICO 2013), 연간 약 350만 톤의 커피부산물의 확보가 산술적으로 가능 하다. 국내의 경우, 2009년 기준으로 생두 및 원두 수입량은 각각 96,000톤과 3,500톤으로 매년 10% 내외의 증가세를 보이고 있으므로 원료의 용이한 수급이 가능하다(Kim 2011). |
Ahn, B.J., Chang, H.S., Lee, S.M., Choi, D.H., Cho, S.T., Han, G.S., Yang, I. 2014. Effect of binders on the durability of wood pellets fabricated from Larix kaemferi C. and Liriodendron tulipifera L. sawdust. Renewable Energy 62: 18-23.
Baquero, M.C., Giraldo, L., Moreno, J.C., Suarez-Garcia, F., Martinez-Alonso, A., Tascon, J.M.D. 2003. Activated carbons by pyrolysis of coffee bean husks in presence of phosphoric acid. Journal of Analytical and Applied Pyrolysis 70(2): 779-784.
Boonamnuayvitaya, V., Sae-ung S., Tanthapanichakoon, W. 2004 Preparation of activated carbons from coffee residues for the adsorption of formaldehyde. Separation and Purification Technology 42(2): 159-168.
Department of the Environment. 2011. Act on indoor air quality management in crowd facilities. Act No.10789.
International Coffee Organization. 2013. Annual coffee production.
Khan, M.A., Ashraf, S.M. 2005. Development and characterization of a lignin-phenol-formaldehyde wood adhesive using coffee bean shell. Journal of Adhesion Science and Technology 19(6): 493-509.
Kim, J.H. 2011. Exploratory studt on the strategic advantage of strong medium enterprise in Korean take-out coffee market Caffebene story. Korean Academy of High Potential Enterprises 2(1): 37-58.
Kim, K.W., Lee, S.N., Baek, B.S., Lee, B.H., Kim, H.J., Choi, Y.M., Jang, S.W. 2008. The formaldehyde, VOCs emission of particleboard with cross linked vinyl resin. Adhesion and interface 9(1): 28-34.
Korea Forest Research Institute. 2010. A desiccator method for determination of formaldehyde release from wood based panels. Notification No. 2010-09. KFRI.
Lee, H.S., Kang, J.W., Yang, W.H., Zong, M.S. 1998. A study on preparation of adsorbent from coffee grounds and removal of trichloroethylene in water treatment. Korean Journal of Environmental Health Society 24(2): 20-31.
Lee, S.M., Park, J.Y., Park, S.B., Park, B.D. 2010. Development of technology and syntheses of melamine-urea-formaldehyde resin adhesives. Research report of Korea Forest Research Institute. 10-20.
Park, B.D., Kang, E.C., Park, J.Y. 2004. Formaldehyde emission of wood panel products with different surface finishing materials. Korea Forest Research Institute Journal of Forest Science 67: 112-116.
Pickrell, J.A., Griffis, L.C., Mokler, B.V., Hobbs, C.H., Kanapilly, G.M., Bathija, A., 1986. Formaldehyde release rate coefficients from selected consumer products. In: Meyer, B., Andrews, B. and Reinhardt, R. M. (eds) Symposium Series, Formaldehyde Release from Wood Products, Washington, DC, American Chemical Society Symposium Series, 385, p. 40.
Pouwels, A.D., Anneke, T., Eijkel, B.G.B., Boon, J.J. 1987. Characterization of beech wood and its holocellulose and xylan fractions by pyrolysis-gas chromatography-mass spectrometry. Journal of Analytical and Applied Pyrolysis 11: 417-436.
Que, Z., Furuno, T., Katoh, S., Nishino, Y. 2007. Evaluation of three test methods in determination of formaldehyde emission from particleboard bonded with different mole ratio in the urea-formaldehyde resin. Building and Environment 42(3): 1242-1249.
Yang, I., Ahn, S.H., Choi, I.G., Kim, H.Y., Oh, S.C. 2009. Adhesives formulated with chemically modified okara and phenol-resorcinol-formaldehyde for bonding fancy veneer onto high-density fiberboard. Journal of Industrial and Engineering Chemistry 15: 398-402.
Yang, I., Kuo, M.L., Myers, D.J., Pu, A.B. 2006. Comparison of protein-based adhesive resins for wood composites. Journal of Wood Science 52: 503-508.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.