최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국건설관리학회논문집 = Korean journal of construction engineering and management, v.16 no.3, 2015년, pp.36 - 48
주선우 (서울대학교 건축학과) , 박문서 () , 이현수 (서울대학교 건축학과) , 이광표 (서울대학교 건축학과)
To complete various types of finish works with higher quality in much less time, TACT, which was mostly used for high-rise buildings, has been adapted to meet the needs for systematic schedule management in construction sites. However, the effectiveness of adapting TACT has not been shown as expecte...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
TACT 기법을 공동주택에 적용하기에 어떤 문제점들이 있는가? | 또한 기존 국내 TACT 기법 적용은 대부분 오피스빌딩 현장에 국한되어, 공동주택에의 효과적 적용을 위해서는 극복해야 할 문제들이 존재한다. 대형 평면의 1개 동으로 이루어진 오피스빌딩과 달리 공동주택은 소형 평면을 가진 여러 개 동의 단지로 구성되며 이로 인해 자재 및 인력의 수평·수직 양중 시간 및 대기 시간이 증가한다. 또한 국내 주거문화 특성 상 마감 주공정선에 기포 콘크리트, 바닥 미장 등 습식 공종이 다수 존재하여 양생기간으로 인해 해당 공정의 동기화가 어렵고 기존에 비해 장비운용의 효율성이 감소하게 된다. | |
TACT 기법의 목적은 무엇인가? | 이에 공동주택 마감공정관리 효율성 증대를 위해 린건설과 LOB(Line of Balance) 개념의 TACT 공정기법을 도입하는 움직임이 늘고 있다. TACT 기법은 다공구 및 공정 간 동기화를 통해 작업흐름의 신뢰성 개선, 자원 평준화, 대기시간 zero화를 달성하여 재고·낭비의 최소화, 관리편의성·변이관리능력·생산성 향상을 추구한다. 그러나 TACT 기법 적용은 기존 일반적인 마감공정 방식과의 차이로 인해 작업자와 관리자의 적응에 시간을 요하여 충분한 사전교육 및 반복적 의사소통을 필요로 한다. | |
TACT Scheduling Method은 어떻게 분류되는가? | TACT Scheduling Method는 형식적 TACT, 불완전 TACT, 완전 TACT의 세 가지 형태로 분류된다(윤유상 et al. 2003, 박민선 et al. |
Adrian, J. J. (1987). Construction productivity improvement, Elsevier, New York, N.Y.
Ballard, G., and Howell, G. A. (2003). "Lean project management." Build. Res. Inf., 31(2), pp. 119-133.
Business Roundtable. (1987). Measuring productivity in construction, A Construction Industry Cost Effectiveness Project Report.
Carr, R. I., and Meyer, W. L. (1974). "Planning construction of repetitive building units." J. Constr. Div., 100(3), pp. 403-412.
Herbsman, Z., and Ellis, R. (1990). "Research of factors influencing construction productivity." Constr. Manage. Econom., 8(1), pp. 49-61
Hwang, H., Kim, K., Seo, S., Kim, C., and Shin, D. (2002). "Analysis of Actual Duration by Effecting Elements to Duration Estimate." Korean Journal of Construction Engineering and Management, KICEM, 3(3), pp. 84-93.
Hwang, J. (2009). "Business Process Model for Applying TACT Methodology to Finish Work in Apartment House." MS Thesis, Soonsil University.
Josephson, P. E., and Hammarlund, Y. (1999). "The causes and costs of defects in construction: A study of seven building projects." Autom. Constr., 8, pp. 681-687.
Jung, J. (2007). "Improvement of TACT Scheduling Management Process for the Finish Work of Apartment Houses." MS Thesis, Dankook University.
Kim, B. (2012). "TACT Process Reengineering for Improving the Usability in Construction Sites." MS Thesis, Chungbuk National University.
Kim, J., Yoon, Y., Jang, M., and Suh, S. (2007). "Workflow-based TACT Planning & Scheduling Process -Focused on the Finish Work of Apartment Building-." Journal of the Architectural Institute of Korea Structure & Construction, 23(6), pp. 153-162.
Kim, K. (2014). "A Study on Improvement of Repetition Process Management for Finish Works Quality of Construction -Focused on Apartment Housing Projects-." MS Thesis, Yonsei University.
Kim, S., Na, K., Kim, T., Yu, J., Lee, H., and Kim, C. (2003). "A Study on the TACT Management using a Daily Report Information." Korean Journal of Construction Engineering and Management, KICEM, 4(4), pp. 80-87.
Kim, S., Yoo, J., Kim, D., and Park, J. (2014). "TACT Scheduling & Monitoring of Apartment Finish Works based on the BDM Technique." Korean Journal of Construction Engineering and Management, KICEM, 15(2), pp. 3-11.
Kim, T. (2008). "Improvement of TACT Scheduling Process in Finishing Works of the Residential Housing." MS Thesis, Department of Architecture Graduate School, Ajou University.
Kim T., Lee, H., Park, M., and Yu, J. (2011). "Productivity Management Methodology using Productivity Achievement Ratio." Journal of Civil Engineering, KSCE, 15(1), pp. 23-31.
Kim. T., Yu, J., Baek, T., and Lee, H. (2004). "Productivity Achievement Ratio Model through Construction Productivity Reduction Factor Analysis." Journal of the Architectural Institute of Korea Structure & Construction, 24(2), pp. 135-142.
Kim. T., Yu, J., and Lee, H. (2003). "Productivity Management Methodology using Productivity Achievement Ratio." Journal of the Architectural Institute of Korea Structure & Construction, 19(9), pp. 103-111.
Kim, Y., Han, J., Shin, D., Kim, K., Kim, C., and Seo, S. (2003). " A Tact Planning and Scheduling Process Model for Reduction of Finishing Work Duration in Building Construction Projects." Journal of the Architectural Institute of Korea Structure & Construction, 19(1), pp. 161-168.
Koskela, L. (1992). "Application of The New Production Philosophy to Construction." CIFE Technical Report No. 72, Stanford University.
Koushki, P. A., Al-Rashid, K., and Kartam, N. (2005). "Delays and cost increases in the construction of private residential projects in Kuwait." Constr. Manage. Econom., 23, pp. 285-294.
Lee, H. (2014). "Issues and Improvement Schemes of TACT Process Management Application to Practical sites in Public Housing Finishing Works." MS Thesis, The Graduate School of Construction Engineering, Chung-Ang University.
Lee, J. (2001). "A Work Interference Management Model for Apartment Building Finish Works." MS Thesis, Chung-Ang University.
Lee, W. (2011). "The Application of the TACT Method for Finish Works of Apartment Buildings." MS Thesis, KyungHee University.
Lin, C., and Huang, H. (2010). "Improved Baseline Productivity Analysis Technique." J. Constr. Eng. Manage., 136(3), pp. 367-376.
Lowe, J. G. (1987). "The measurement of productivity in the construction industry."Constr. Manage. Econom., 5(2), pp. 101-113.
Neil, J. M., and Knack, L. E. (1984). "Predicting productivity."AACE Transactions, pp. 1-8.
Oglesby, C., Parker, H., and Howell, G. (1989). Productivity improvement in construction, McGraw-Hill, New York, N.Y.
Okoil, C., and Pawlowski S. (2004). "The Delphi Method as a Research Tool: An Example, Design Considerations and Applications." Information & Management, 42(1), pp. 15-29.
Park, M., Kim, K., Shin, D., and Cha, H. (2006). "Improvement on TACT Scheduling Method Applying Theory of Constraints." Journal of the Architectural Institute of Korea Structure & Construction, 22(6), pp. 139-146.
Peer, S. (1974). "Network analysis and construction planning." J. Constr. Div., 100(3), pp. 203-210.
Rendall, F. J., and Wolf, D. M. (1983). Statistical Sources and Techniques, McGraw-Hill, London, pp. 41-52.
Sacks, R., and Goldin, M. (2007). "Lean Management Model for Construction of High-Rise Apartment Buildings." Journal of Construction Engineering and Management, 133(5), pp. 374-384.
Shin, D. (2009). "Application Plan of TACT Process for Finish Works in Apartment Housing Projects." MS Thesis, Graduate School of Urban Science, University of Seoul.
Sink, D. S. (1985). Productivity Management: Planning. Measurement and Evaluation, Control and Improvement, John Wiley & Sons, N.Y.
Suh, S., Kim, J., Kim, S., Kim, C., and Lee, H. (2003). "Development and Application of TACT Management System." Korean Journal of Construction Engineering and Management, KICEM, 4(4), pp. 145-154.
Sumanth, D. (1984). Productivity engineering and management, McGraw-Hill, New York, N.Y.
Thomas, H. R., and Mathews, C. T. (1985). "An analysis of the methods of measuring construction productivity." Construction Industry Institute, Austin, Texas.
Thomas, H. R., and Zavrski, I. (1999). "Construction baseline productivity: Theory and practice." Journal of Construction Engineering and Management, 125(5), pp. 295-303.
Xia, Bo, and Chan, Albert. (2011). "Measuring Complexity for Building Projects : a Delphi Study." Engineering, Construction and Architectural Management, 19(1), pp. 7-24.
Yoon, Y., Joung, Y., Suh, S., Shin, D., Kim, C., and Kim, K. (2003). "Improvement of Construction Process Management Dividing th Work Area Reasonably in Building Construction." Korean Journal of Construction Engineering and Management, KICEM, 4(2), pp. 59-65.
Yoon, Y., and Suh, S. (2005). "The Application of TACT Time at Finish Work for Building Construction - Focused on Office Building-." Korean Journal of Construction Engineering and Management, KICEM, 6(6), pp. 90-97.
Yu, J., Lee, H., Kim, S., Kim, C., and Suh S. (2004). "Effect of Labor Factors on Work Flows." Journal of the Architectural Institute of Korea Structure & Construction, 20(4), pp. 135-142.
Ziglio E. (1996). The Delphi method and its contribution to decision making. Gazing into the oracle: The Delphi method and its application to social policy and public health, Jessica Kingsley Publisher, London.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.