최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, v.39 no.7, 2015년, pp.707 - 712
김용래 (영남대학교 기계공학부) , 왕초 (영남대학교 기계공학부) , 김재웅 (영남대학교 기계공학부)
During the welding process, welding distortion is caused by the non-uniformity of the temperature distribution in the weldment. Welding distortion is redistributed because the residual stress and rigidity change according to the removal of the welded structure. In shipbuilding in particular, this ph...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
용융용접란 무엇인가? | 용융용접은 국부적으로 재료를 용융시켜 결합하는 방법으로 부재를 구조적으로 일체화시키는 작업이다. 용접과정 중용접구조물은 용접열원에 의해 가열과 냉각의 열이력을 가지게 되며, 열전달에 의해 불균일한 온도분포가 연속적으로 발생된다. | |
러그를 제거하는 방식은 무엇이 있는가? | 이러한 과정에서 앞서 언급한 바와 같이 용접변형의 재분포가 발생하게 되는 것이다. 러그를 제거하는 방식은 크게 산소절단법, 와이어 커팅 및 티톱 커팅 등이 사용된다. 특히 띠톱을 이용하는 경우, 러그를 제거하는 과정에서 용접변형의 재분포에 의해서 띠톱이 절단 틈새에 끼어 더이상 절단이 진행되지 않거나, 절단공구가 파손되는 사례가 발생된다. | |
용접과정 중용접구조물의 불균일한 온도분포는 무엇을 발생시키는가? | 용접과정 중용접구조물은 용접열원에 의해 가열과 냉각의 열이력을 가지게 되며, 열전달에 의해 불균일한 온도분포가 연속적으로 발생된다. 이러한 불균일한 온도분포에 의해 열팽창이 국부적으로 분포되어 발생하며, 동시에 재료의 기계적 성질도 크게 변화되며, 내외적 구속에 의해 용접구조물에서는 용접변형이 발생하게 된다.(1~3) 이러한 용접변형은 영구적인(소성) 변형과 함께 탄성변형을 포함하게 되는데, 탄성변형량은 용접 잔류응력분포와 평형상태를 이루게 되는 정도로 발생하게 된다. |
Dong, P., 2005, "Residual Stress and Distortions in Welded Structures," Journal of Science and Technology of Welding and Joining, 10-4, pp. 389-398.
Yang, Y.-S., 2005, "Generation Mechanism and Analysis of Welding Distortion," Journal of KWJS, 23-4, pp. 317-321.
Jang, G.-B. and Kang, S.-S., 2000, "Numerical Modeling of the Transformation Temperature Effect on the Relaxation of Welding Residual Stress," Trans. Korean Soc. Mech. Eng. A, Vol. 24, No. 10, pp. 2552-2559.
Li, B., Jiang, X., Yang, J. and S. Liang, Y., 2015, "Effects of Depth of Cut on the Redistribution of Residual Stress and Distortion During the Milling of Thin-Walled Part," Journal of Materials Processing Technology, 216, pp. 223-233.
Yang, Z. and Lee, Y., 2014, "The Study for Redistribution Residual Stress for Cutting of Welded Specimens," Proceedings of the KSME Reliability Engineering Division 2014 Spring Conference, p. 124.
Uezaki, K., Shimizu, J. and Zhou, L., 2014, "Development of Metal Cutting Process Accompanied by a Localized Compressive Hydrostatic Stress Field Formation: Examination by Molecular Dynamics Simulation," Precision Engineering, 38, pp. 371-378.
Kim, Y.-R., Song, G.-Y., Wang, C. and Kim, J.-W., 2013, " A Study on the Welding Distortin Analysis According to Rib Height in Fillet Welding," Journal of KWJS, 31-6, pp. 107-111.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.