최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기치위생과학회지 = Journal of dental hygiene science, v.15 no.2, 2015년, pp.226 - 231
이재준 (고려대학교 일반대학원 보건과학과 치의기공전공) , 박진영 (고려대학교 일반대학원 보건과학과 치의기공전공) , 배소연 (고려대학교 일반대학원 보건과학과 치의기공전공) , 전진훈 (고려대학교 일반대학원 보건과학과 치의기공전공) , 김지환 (고려대학교 일반대학원 보건과학과 치의기공전공) , 김웅철 (고려대학교 일반대학원 보건과학과 치의기공전공)
The purpose of this study was to evaluate the accuracy of model according to three types of dental scanner. A maxillary acrylic model was prepared and duplicated 10 times by silicone impression materials. Corresponding working casts were formed from scannable stone and got a 3-dimensional digital mo...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
광학식 스캐너란? | 한편 광학식 스캐너로는 백색광 스캐너와 청색광 스캐너가 대표적이다. 이들은 특정 패턴을 물체에 투영시켜 그 패턴의 변형 형태를 파악하게 함으로써 3차원 정보를 얻어 낸다8). 광학식 스캐너에서는 큰 폭에서 작은 폭으로 줄무늬 모양의 빛을 여러 차례 투사하고, 그 이미지를 삼각측량법으로 계산하여 순차적으로 데이터를 확보한 이후에 여러 방향에서 얻어진 데이터의 이미지를 종합함으로써 최종 데이터를 얻는다9). | |
광학식 스캐너의 장점은 무엇인가? | 광학식 스캐너에서는 큰 폭에서 작은 폭으로 줄무늬 모양의 빛을 여러 차례 투사하고, 그 이미지를 삼각측량법으로 계산하여 순차적으로 데이터를 확보한 이후에 여러 방향에서 얻어진 데이터의 이미지를 종합함으로써 최종 데이터를 얻는다9). 이것은 기존에 사용하고 있는 레이저 스캐너에 비해 스캔 속도가 빠르고 선명한 이미지를 얻을 수 있는 장점이 있다10). | |
치과계에서 사용하는 스캐너의 종류로는 무엇이 있는가? | 스캐너의 종류로는 직접 구강 내 촬영을 통하여 지대치의 자료를 얻는 방식인 구강 내 스캐너(intra-oral scanner)와 경석고모형을 제작하고 이를 스캔하는 구강 외 스캐너(extra-oral scanner)가 있다. 현재 구강 외 스캐너로 주로 사용되고 있는 것은 접촉식 스캐너(touch probe scanner), 레이저 스캐너(laser scanner, LS), 백색광 스캐너(white light scanner, WLS), 청색광 스캐너(blue light scanner, BLS) 등이 있다5,6). |
Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y: A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J 28:44-56, 2009.
Christensen GJ: The state of fixed prosthodontic impressions: room for improvement. J Am Dent Assoc 136: 343-346, 2005.
Felton D, Kanoy B, Bayne S, Wirthman G: Effect of in vivo crown margin discrepancies on periodontal health. J Prosthet Dent 65: 357-364, 1991.
Duan Y, Griggs JA: Effect of elasticity on stress distribution in CAD/CAM dental crowns: glass ceramic vs. polymermatrix composite. J Dent 2015. [Epub ahead of print]
Persson A, Andersson M, Oden A, Sandborgh-Englund G: A three-dimensional evaluation of a laser scanner and a touchprobe scanner. J Prosthet Dent 95: 194-200, 2006.
May KB, Russell MM, Razzoog ME, Lang BR: Precision of fit: the procera all ceram crown. J Prosthet Dent 80: 394-404, 1998.
Mehl A, Gloger W, Kunzelmann KH, Hickel R: A new optical 3-D device for the detection of wear. J Dent Res 76:1799-1807, 1997.
Rudolph H, Luthardt RG, Walter MH: Computer-aided analysis of the influence of digitizing and surfacing on the accuracy in dental CAD/CAM technology. Comput Biol Med 37: 579-587, 2007.
Perakis N, Belser UC, Magne P: Final impressions: a review of material properties and description of a current technique. Int J Periodontics Restorative Dent 24: 109-118, 2004.
Persson AS, Oden A, Andersson M, Sandborgh-Englund G: Digitization of simulated clinical dental impressions: virtual three-dimensional analysis of exactness. Dent Mater 25:929-936, 2009.
Kim SY, Kim MJ, Han JS, Yeo IS, Lim YJ, Kwon HB: Accuracy of dies captured by an intraoral digital impression system using parallel confocal imaging. Int J Prosthodont 26:161-163, 2012.
Flugge TV, Schlager S, Nelson K, Nahles S, Metzger MC: Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner. Am J Orthod Dento facial Orthop 144: 471-478, 2013.
Guth JF, Keul C, Stimmelmayr M, Beuer F, Edelhoff D: Accuracy of digital models obtained by direct and indirect data capturing. Clin Oral Investig 17: 1201-1208, 2013.
Cho SH, Schaefer O, Thompson GA, Guentsch A: Comparison of accuracy and reproducibility of casts made by digital and conventional methods. J Prosthet Dent 113: 310-315, 2015.
Bernal C, de Agustina B, Marin M, Camacho A: Performance evaluation of optical scanner based on blue LED structured light. Proc Eng 63: 591-598, 2013.
Kim JH, KIM KB: Evaluation of dimensional stability of digital dental model fabricated by impression scanning method. J Dent Hyg Sci 14: 15-21, 2014.
Kobayashi Y, Lee W, Hotta Y, Fujiwara T, Miyazaki T: The effect of proximal teeth on the digitizing accuracy of the shoulder margin of the crown abutment by a laser digitizer equipped in an experimentally developed CAD/CAM device. J Showa Univ Dent Soc 20: 158-164, 2000.
Santoro M, Galkin S, Teredesai M, Nicolay OF, Cangialosi TJ: Comparison of measurements made on digital and plaster models. Am J Orthod Dentofacial Orthop 124: 101-105, 2003.
Park S, Kang HC, Lee J, Shin J, Shin YG: An enhanced method for registration of dental surfaces partially scanned by a 3D dental laser scanning. Comput Method Progr Biomed 118: 11-22, 2015.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.