최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國地盤工學會論文集 = Journal of the Korean geotechnical society, v.31 no.8, 2015년, pp.29 - 38
고준영 (연세대학교 토목환경공학과) , 정상섬 (연세대학교 토목환경공학과) , 이승연 (연세대학교 토목환경공학과)
This paper presents the application of the Coupled Eulerian-Lagrangian (CEL) numerical technique to simulate the driving of open-ended piles into sandy soil. The main objective of this study was to investigate the applicability of CEL technique to the behavior of the driven pile penetration. Compreh...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
항타 말뚝은 어떻게 시공되는가? | 항타 말뚝은 관입성을 높이기 위해 일반적으로 개단 상태로 시공된다. 이 때 말뚝이 지반에 관입될 때 말뚝 속으로 밀려들어간 흙으로 인하여 말뚝의 선단부가 막힌 것과 유사한 효과를 발휘하기 때문이며 이를 폐색효과(plugging effect)라고 하며 관입하는 동안에 흙과 말뚝 벽과의 마찰로 인하여 말뚝 내부에 흙마개(soil plug)가 형성된다. | |
유한요소해석법은 무엇을 기반으로 하는가? | 최근 수십 년간 지반공학 분야에서는 수치해석적 방법에 대한 연구가 꾸준히 진행되었으며, 유한요소해석법(finite element method, FEM)에 대한 연구가 활발히 진행되어 오고 있다. 하지만, Lagrangian 좌표를 기반으로 하는 기존 유한요소해석법은 대변형이 발생 시 메쉬(mesh)의 왜곡 현상 및 상대변위로 인한 접촉면이 수렴하지 않는 문제가 발생하여 지반-구조물의 상호작용 해석에 어려운 점이 있다. 대체 해석법으로 개별요소법 (discrete element method) 또는 updated Lagrangian(UL) 방법 등이 있으나, 빠른 속도로 거동하는 구조물-지반의 동적거동을 예측하기에는 한계가 있다(Kim and Jeong, 2014). | |
RITSS 방법의 단점은? | 특히 해석 단계마다 메쉬를 재생성하고 결과를 재배치하여 비교적 정확한 해석방법으로 알려져 있다. 하지만 in-house 코드를 이용하여 해석하기 때문에 사용자의 접근성이 떨어지는 단점이 있다. AM 방법은 범용 프로그램인 ABAQUS에 내장된 해석기법으로 해석 단계마다 왜곡된 메쉬를 합리적으로 수정하는 기법이다. |
ABAQUS. (2013), ABAQUS user's and theory manuals, Version 6.13. rhode island: Hibbitt, Karlsson & Sorensen, Inc.
Beringen, F. L., Windle, D., and Van Hooydonk, W. R. (1979), "Results of Loading Tests on Driven Piles in Sand", Proceedings of the Conference on Recent Development in the Design and Construction of Piles, ICE, London, Vol.21-22, pp.213-225.
Chow, F. C. (1997), "Investigation into the behaviour of Displacement Piles for Offshore Foundation", Ph.D. thesis, University of London (Imperial College), London, UK.
Goble, G. G., Raushe, F. R., and Likins, G. E. (1980), "The Analysis of Pile Driving-a State-of-the-art", Proceedings of International Seminar on the Application of Stress-Wave Theory on Piles, Stockholm, Sweden, pp.131-162.
Jeong, S. S., Lee, K. W., Kim, Y. M., and Kim, J. H. (2014), "A Study on the Landslide/debris Flow based on Large Deformation Analysis", Proceedings of the 40th KSCE Conference, Daegu, Korea, pp.271-272.
Kishida, H. (1967), "The Ultimate Bearing Capacity of Pipe Piles in Sand", Proceedings of 3rd Asian Regional Conference on Soil Mechanics and Foundation Engineering, pp.196-199.
Klos, J. and Tejchman, A. (1981), "Bearing Capacity Calculation for Pipe Piles", Proceedings of the 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm, Sweden, Vol.2, pp.751-754.
Ko, J. Y. and Jeong, S. S. (2014), "Analysis of Plugging Effect for Open-ended Piles based on Field Tests", Journal of Korean Geotechnical Society, Vol.30, No.12, pp.51-61.
Ko, J. Y. and Jeong, S. S. (2015), "Plugging Effect of Open-ended Piles in Sandy Soil", Canadian Geotechnical Journal, Vol.52, No.5, pp.535-547.
Lee, K. W., Kim, Y. M., Kim, J. H., and Jeong, S. S. (2014), "A Study on the Landslide/debris Flow Considering the Erosion and Entrainment of Bed Sediment", Proceedings of KGS fall national conference, Seoul, Korea, pp.169-174.
Lehane, B. M. (1992), "Experimental Investigation of Pile behaviour Using Instrumented Field Piles", Ph.D. thesis, University of London (Imperial College), London, UK.
Mabsout, M. E., Reese, L. C., and Tassoulas, J. L. (1995), "Study of Pile Driving by Finite-element Method", Journal of Geotechnical Engineering, Vol.121, No.7, pp.535-543.
Mabsout, M. E, Sadek, S. M., and Smayra, T. E. (1999), "Pile Driving by Numerical Cavity Expansion", International Journal for Numerical and Analytical Methods in Geomechanics, Vol.23, No.11, pp.1121-1140.
Paikowsky, S. G. (1989), "A Static Evaluation of Soil Plug behavior with Application to the Pile Plugging Problem", D.Sc. thesis, Massachusetts Institute of Technologym Cambridge, MA.
Paikowsky, S. G. (1990), "The Mechanism of Pile Plugging in Sand", Proceedings of the 22nd Offshore Technology Conference, Houston, TX, pp.593-604.
Qiu, G., Henke, S., and Grabe J. (2011), "Application of a Coupled Eulerian-Lagrangian Approach on Geomechanical Problems Involving Large Deformations", Computers and Geotechnics, Vol.38, pp.30-39.
Szechy, C. H. (1959), "Tests with Tubular Piles", Acta Technica, Hungarian Academy of Science, Vol.24, pp.181-219.
Tho, K. K., Leung, C. F., Chow, K. K., and Swaddiwudhipong, S. (2012), "Eulerian Finite-Element Technique for Analysis of Jack-up Spudcan Penetration", International Journal of Geomechanics, Vol.12, No.1, pp.64-73.
Wang, D., Hu, Y., and Randolph, M. F. (2010), "Three-dimensional Large Deformation Finite-element Analysis of plate Anchors in Uniform Clay", Journal of Geotechnical and Geoenvironmental Engineering, Vol.136, No.2, pp.355-365.
White, D. J., Schneider, J. A., and Lehane, B. M. (2005), "The Influence of Effective Area Ratio on Shaft Friction of Displacement Piles in Sand", Proceedings of Frontier in255 Offshore Geotechnics, pp.741-747.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.