최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기치위생과학회지 = Journal of dental hygiene science, v.15 no.5, 2015년, pp.673 - 678
김사학 (경동대학교 치기공학과) , 김재홍 (경동대학교 치기공학과) , 김종견 (경동대학교 호텔경영학과)
The purpose of this study was to evaluate the reliability and accuracy of linear measurements in digital models compared to master model. A master model (ANKA-4; Frasaco GmbH, Tettnang, Germany) with the prepared upper full arch tooth was used. Four linear measurements were recorded between landmark...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
복제 모형 제작과정의 특징은? | 구강 내의 환경을 재현하는 복제 모형 제작과정은 치과진료에서 있어서 매우 중요한 과정 중 하나이며, 정확성과 효율성 그리고 신속성이 모두 만족되어야 하는 과정이다. 현재 대부분의 치과 의원에서는 구강 내 모습을 재현할 때 인상재와 트레이를 이용한 전통적인 인상채득 방법을 사용하고 있다. | |
In-office CAD/CAM system으로 기존의 인상채득 방법을 대체할 시에 생기는 장점은 무엇인가? | 이러한 신개념의 인상채득 방법을 가능하게 하는 가장 중요한 작업 중 하나가 바로 구강 내의 모습을 3차원적으로 재구성하여 디지털화하는 것이다. In-office CAD/CAM system은 구강 내 스캐너를 이용하여 디지털 인상을 채득하고 컴퓨터로 보철물의 크기와 형태, 인접치와의 관계, 대합치와의 교합관계를 디자인하여 진료실 내의 연결된 milling machine을 통해 보철물 제작이 즉각 가능하도록 한다. 따라서 환자는 1번의 내원만으로도 인레이(inlay), 온레이(onlay), 라미네이트(laminate), 크라운(crown)의 제작 및 장착이 가능하다는 장점이 있다4,5). | |
인상재와 트레이를 이용한 전통적인 인상채득 방법의 문제점은 무엇인가? | 현재 대부분의 치과 의원에서는 구강 내 모습을 재현할 때 인상재와 트레이를 이용한 전통적인 인상채득 방법을 사용하고 있다. 하지만 인상채득 과정은 인상재의 잘못된 선택 또는 사용방법에 따른 인상체 변형과 술자의 숙련도와 상관없는 환자의 구토반응, 개구장애 등과 같이 다양한 요인들에 의하여 여러 번 채득이 불가피할 수도 있다. 인상채득 후 석고모형을 제작하는 과정에서 인상재 종류와 시간, 주변환경에 따른 변형의 가능성, 그리고 모형재의 경화팽창 등이 문제가 되며, 보관 시의 분실과 파손 가능성 등의 문제도 있다1-3). |
Mah J, Hatcher D: Current status and future needs in craniofacial imaging. Orthod Craniofac Res 6: 10-16, 2003.
White AJ, Fallis DW, Vandewalle KS: Analysis of intra-arch and interarch measurements from digital models with 2 impression materials and a modeling process based on cone-beam computed tomography. Am J Orthod Dentofacial Orthop 137: e451-459, 2010.
Chandran DT, Jagger DC, Jagger RG, Barbour ME: Twoand three-dimensional accuracy of dental impression materials: effects of storage time and moisture contamination. Biomed Mater Eng 20: 243-249, 2010.
Christensen GJ: The state of fixed prosthodontics impressions: room for improvement. J Am Dent Assoc 136: 343- 346, 2005.
Christensen GJ: Impressions are changing: deciding on conventional, digital or digital plus in-office milling. J Am Dent Assoc 140: 1301-1304, 2009.
Bindl A, Mormann WH: Clinical and SEM evaluation of all-ceramic chair-side CAD/CAM generated partial crowns. Eur J Oral Sci 111: 163-169, 2003.
Nakamura T, Dei N, Kojima T, Wakabayashi K: Marginal and internal fit of Cerec 3 CAD/CAM allceramic crowns. Int J Prosthodont 16: 244-248, 2003.
Caputi S, Varvara G: Dimensional accuracy of resultant casts made by a monophase, one-step and two-step, and a novel two-step putty/light-body impression technique: an in vitro study. J Prosthet Dent 99: 274-281, 2008
Seelbach P, Brueckel C, Wostmann B: Accuracy of digital and conventional impression techniques and workflow. Clin Oral Investig 17: 1-6, 2012.
Ender A, Mehl A: Full arch scans conventional versus digital impressions--an in-vitro study. Int J Comput Dent 14: 11-21, 2011.
Kim KB, Lee GT, Kim HY, Kim JH: The influence of different gypsum materials on the accuracy from complete arch digital impression. J Dent Hyg Sci 12: 617-623, 2012.
Bland JM, Altman DG: Statistical methods for assessing agreement between two methods of clinical measurement. Int J Nurs Stud 47: 931-936, 2010.
Lin LI-K: A concordance correlation coefficient to evaluate reproducibility. Biometrics 45: 255-268, 1989.
Bell A, Ayoub AF, Siebert P: Assessment of the accuracy of a three dimensional imaging system for archiving dental study models. J Orthod 30: 219-223, 2003.
Watanebe-Kanno GA, Abrao J, Miasiro J, Hiroshi Sanchez-Ayala A, Lagravere MO: Reproducibility, reliability and validity of measurements obtained from Cecile 3 digital models. Braz Oral Res 23: 288-295, 2009.
Keating AP, Knox J, Bibb R, Zhurov Al: A comparison of plaster, digital and reconstructed study model accuracy. J Orthod 35: 191-201, 2008.
Kuroda T, Motohashi N, Tominaga R, Iwata R: Threedimensional dental cast analyzing system using laser scanning. Am J Orthod Dentofacial Orthop 110: 365-369, 1996.
Lowey MN: The development of a new method of cephalometric and study cast measuration with a computer controlled, video image capture system. Part II: study cast mensuration. Br J Orthod 20: 315-331, 1993.
Quimby ML, Vig KW, Rashid RG, Firestone AR: The accuracy and reliability of measurements made on computerbased digital models. Angle Orthod 74: 298-303, 2004.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.