최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기설비공학논문집 = Korean journal of air-conditioning and refrigeration engineering, v.27 no.9, 2015년, pp.475 - 483
권미혜 (인천대학교 기계시스템공학부) , 고민건 (인천대학교 기계시스템공학부) , 김내현 (인천대학교 기계시스템공학부)
In Korea, a typically hot and humid summer means that air-conditioners consume a large quantity of electricity; accordingly, the simultaneous usage of an indirect evaporative cooler may reduce the sensible-heat level and save the amount of electricity that is consumed. In this study, the heat-transf...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
증발냉각방식은 어떤 효과를 이용하는가? | 물의 증발에 따른 냉각 효과를 이용하는 증발냉각방식은 기존 증기 압축식 에어컨에 비하여 냉방에 소요되는 에너지를 현저히 감소시킬 수 있고, 여름철 첨두부하를 경감시키며 CFC 냉매를 사용하지 않아 친환경적이다.(1-5) 증발냉각방식은 직접냉각방식과 간접냉각방식으로 대별된다. | |
직접냉각방식과 간접냉각방식을 비교하라 | Fig. 1에 나타나 있듯이 직접냉각방식은 물과 직접 접촉을 통하여 공기를 냉각시키는 방법으로 냉각 시 공기 중의 수분량도 증가한다. 간접냉각방식은 냉각 채널(건채널)과 물이 증발하는 채널(습채널)을 구분하여 냉각 시 수분량의 변화는 없다.(6, 7) 직접냉각방식은 고온이고 건조한 기후에 적합한 냉각 방식이고 우리나라와 같이 여름철이 고온 다습한 경우는 간접냉각방식이 적합하다. | |
증발냉각방식이 찬환경적인 이유는? | 물의 증발에 따른 냉각 효과를 이용하는 증발냉각방식은 기존 증기 압축식 에어컨에 비하여 냉방에 소요되는 에너지를 현저히 감소시킬 수 있고, 여름철 첨두부하를 경감시키며 CFC 냉매를 사용하지 않아 친환경적이다.(1-5) 증발냉각방식은 직접냉각방식과 간접냉각방식으로 대별된다. |
Duan, Z., Zhan, C., Zhang, X., Mustafa, M., Zhao, X., Alimohammadisgvand, B., and Hasan, A., 2012, Indirect evaporative cooling : past, present and future potentials, Renew. Sustain. Energy Rev., Vol. 16, pp. 6823-6850.
Jaber, S. and Ajib, S., 2011, Evaporative cooling as an efficient system in Mediterranean region, Appl. Therm. Eng., Vol. 31, pp. 2590-2596.
Caliskan, H., Dincer, I., and Hepbasil, A., 2012, Exergoeconomic enviroecomomic and sustainability analyses of a novel air cooler, Energy Build., Vol. 55, pp. 747-756.
Costello, B. and Finn, D., 2007, Thermal effectiveness characteristics of low approach indirect evaporative cooling systems in buildings, Energy Build., Vol. 39, pp. 1235-1243.
Maheshwari, G. P., Al-Ragom, F., and Suri, R. K., 2001, Energy saving potential of an indirect evaporative cooler, Appl. Energy, Vol. 69, pp. 69-76.
Santamouris, M. and Kolokotsa, D., 2013, Passive cooling dissipation techniques for buildings and other structures : the state of the art, Energy Build., Vol. 57, pp. 74-94.
Watt, J. D. and Brown, W. K., 1997, Evaporative Air Conditioning Handbook, 3rd ed., The Fairmont Press Inc.
Pescod, D., 1979, A heat exchanger for energy saving in an air conditioning plant, ASHRAE Trans., Vol. 85, No. 2, pp. 238-251.
Maclaine-Cross, I. L. and Banks, P. J., 1981, A general theory of wet surface heat exchangers and its application to regenerative cooling, J. Heat Transfer, Vol. 103, pp. 578-585.
Kettleborough, C. F. and Hsieh, C. S., 1983, The thermal performance of the wet surface plastic plate heat exchanger used in an indirect evaporative cooler, J. Heat Transfer, Vol. 105, pp. 366-373.
Parker, R. O. and Treybal, R. E., 1962, The heat mass transfer characteristics of evaporative coolers, Chem. Eng. Prog. Symp. Ser., Vol. 57, No. 32, pp. 138-149.
Hasan, A. an Siren, K., 2003, Performance investigation of plain and finned tube evaporatively cooled heat exchangers, Appl. Therm. Eng., Vol. 23, No. 3, pp. 325-340.
Zalewski, W. and Gryglaszewski, P. A., 1977, Mathematical model of heat and mass transfer processes in evaporative coolers, Chem. Eng. Process, Vol. 36, No. 4, pp. 271-280.
Ren, C. and Yang, H., 2006, An analytical model for the heat and mass transfer processes in indirect evaporative cooling with parallel/counter flow configurations, Int. J. Heat Mass Transfer, Vol. 49, pp. 617-627.
Hasan, A., 2012, Going below the wet-bulb temperature by indirect evaporative cooling : Analysis using a modified ${\epsilon}$ -NTU method, Appl. Energy, Vol. 89, pp. 237-245.
Cui, X., Chua, K. J., Islam, M. R., and Yang, W. M., 2104, Fundamental formulation of a modified LMTD method to study indirect evaporative heat exchangers, Energy Conservation Management, Vol. 88, pp. 372-381.
Riangvilaikul, B. and Kumar, S., 2010, An experimental study of a novel dew point evaporative cooling system, Energy Build., Vol. 42, pp. 637-644.
Zhao, X., Liu, S., and Riffat, S. B., 2008, Comparative study of heat and mass exchanging materials for indirect evaporative cooling systems, Build. Environ., Vol. 43, No. 11, pp. 1902-1911.
ASHRAE Standard 41.1, 1986, Standard Method for Temperature Measurement, ASHRAE.
ASHRAE Standard 41.2, 1987, Standard Method for Laboratory Air-Flow Measurement, ASHRAE.
KS-C-9306, 2010, Air Conditioner, Korean Standard Association.
Threlkeld, J. L., 1970, Thermal Environmental Engineering, 2nd ed., Prentice Hall Pub.
Wang, C.-C., Webb, R. L., and Chi, K.-Y., 2000, Data reduction for airside performance of fin-and-tube heat exchangers, Exp. Thermal Fluid Science, Vol. 21, pp. 218-226.
ASHRAE Standard 143, 2007, Method of test for rating indirect evaporative coolers, ASHRAE.
Klein S. J. and McClintock, F. A., 1953, The description of uncertainties in a single sample experiments, Mech. Eng. Vol. 75, pp. 3-9.
Shah, R. K. and London, A. L., 1989, Laminar Flow in Ducts, Academic Press.
Wang, C.-C., Hsieh, Y.-C. and Lin, Y.-T., 1997, Performance of plate finned tube heat exchangers under dehumidifying conditions, J. Heat Transfer, Vol. 119, pp. 109-117.
Eckels, P. W. and Rabas, T. J., 1987, Dehumidification : on the correlation of wet and dry transport process in plate finned-tube heat exchangers, J. Heat Transfer, Vol. 109, pp. 575-582.
Idem, S. A., Jacobi, A. M. and Goldschmidt, V. W., 1990, Heat transfer characterization of a finned-tube heat exchanger (with and without condensation), Journal of Heat Transfer, Vol. 112, pp. 64-70.
Kim, N.-H., 2015, Modeling of heat and moisture transfer in an indirect evaporative cooler made of plastic film/paper, submitted to Int. J. Air-Cond. Refrig.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.