최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국마린엔지니어링학회지 = Journal of the Korean Society of Marine Engineering, v.40 no.1, 2016년, pp.17 - 27
김영식 (Kisti (Korea Institute of Science and Technology Information)) , 길상철 (KISTI)
The need for storage and transportation facilities of liquefied natural gas have increased significantly because of global environmental regulations and recent shale gas innovation in North America. There is severe competition between Korea, Japan, and China for receiving manufacturing orders of LNG...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
LNG 저장탱크, 파이프라인, 수송용 LNG 선박의 수요가 최근 증가하는 이유? | 최근 전 지구적인 환경규제와 미주지역의 셰일 가스혁명으로 LNG 저장탱크, 파이프라인, 수송용 LNG 선박의 수요가 크게 증가하고 있다. 그에 따라 LNG의 육상 저장탱크와 LNG 선박을 비롯한 해상 수송 설비의 수주경쟁이 주로 한국, 일본, 중국의 세 나라사이에서 전개되고 있다. | |
LNG의 육상 저장탱크와 LNG 선박의 수주경쟁이 이루어지는 나라들은? | 최근 전 지구적인 환경규제와 미주지역의 셰일 가스혁명으로 LNG 저장탱크, 파이프라인, 수송용 LNG 선박의 수요가 크게 증가하고 있다. 그에 따라 LNG의 육상 저장탱크와 LNG 선박을 비롯한 해상 수송 설비의 수주경쟁이 주로 한국, 일본, 중국의 세 나라사이에서 전개되고 있다. LNG 저장과 수송설비의 제작에 있어서 특히 용접조립공정의 합리화는 이러한 수주 경쟁에서 중요한 변수가 될 수 있다. | |
LNG 저장과 수송설비 용접관련 연구 외, 우리나라에서 LNG 산업 발전을 위해 필요한 것은? | LNG 저장과 수송설비 용접관련 연구는 세계적으로 가장 활발한 연구 활동이 국내에서 이루어지고 있다. 그러나 용접공정의 자동화 기술을 제외한 고용착화를 위한 2전극 GTAW 용접, 핫와이어 GTAW용접, 고능률 GMAW과 FCAW 용접기술은 해외의 기술에 비해 미진한 현상에 있어, 용접공정의 고용착화, 고 클린화 개선노력이 국내의 LNG관련 산업 경쟁력 강화를 위해 절실히 요구되고 있다. 이 해설논문에서는 육상의 LNG 저장 탱크와 해상에서의 LNG선박이나 최근 우리나라에서 많이 건조되고 있는 FPSO의 LNG 저장 탱크를 중심으로 국제 경쟁력 강화를 위한 고능률 용접기술 및 비파괴 검사기술을 포함한 LNG 플랜트, 수송 설비에 관한 최신의 품질관리기술 정보를 제공하고자 한다. |
N. Kenichiro and T. Yoshio, "Tanks-welding procedure for LNG storage tanks and manufacturing technologies of Japan," Journal of JWS, vol. 82, no. 1, pp. 46-50, 2013 (in Japanese).
N. OIWA, et.al, "Structure and welding technologies for SPB LNG aluminum tank," Light Metal Welding, vol. 49, no. 1, pp. 2-6, 2011 (in Japanese).
Japan Welding Society, Advanced Welding & Joining Technology, Book of SANPO publication Ltd., pp. 175-176, 2009.
S. Hirai S, et. al, "Construction of the above ground LNG storage tank maded of 7% Ni-TMCP steel," Journal of the JWS, vol. 83, no. 8, pp. 623-628, 2014 (in Japanese).
N. Kenichiro, et.al "Field welding for above-ground LNG storage tanks," Journal of JWS, vol. 84, no. 2, pp. 116-121, 2015.
J. W. Kim, "A LNG pressure vessel design," Journal of KWS, vol. 18, no. 4, pp. 28-37, 2000.
N. Okui, H. Ito, and K. Tsuchiya, "Construction of "Pola Eagle" and "Arctic Sun"-Welding Technology-," J. of IHI Technologies, vol. 34, no. 4, pp. 266-271, 1994 (in Japanese).
N. OIWA, et.al, "Structure and welding technologies for SPB LNG aluminum tank," Light metal welding, vol. 49, no. 1, pp. 2-6, 2011.
J. H. Kim, K. T. Shim, Y. K. Kim, and B. W. Ahn, "Fatigue crack growth characteristics of 9% Ni steel welded joint for LNG storag tank at low temperature," Journal of KWJS, vol. 28, no. 5, pp. 537-542, 2010.
Y. M. Lee, et.al, "A study on the structual integrity of stress concentration region caused by welding discontinuity for construction of 9 % Ni steel of LNG storage tank internal," Cmputional Sructural Engineering Institute of Korea (COSEIK) 2011 annual spring conference, 2011.
J. T Choi, "The effect of the weld heat input on the strength and micro-crack of the Alloy 59 welded part," Collected Papers of KWJS 2005 Annual Conference, pp. 165-167, 2005.
S. R. Lee, et.al, "Prediction of fatigue life for a 270,000 kl LNG storage tank according to shape of corner-protection Knuckle," KIGAS vol. 18, no. 2, pp. 69-72, 2014.
Y. W. Kim, "Experimental Study on the extreme low temperature fatigue and fracture characteristics of 7% Ni steel" Busan National University, 2015, 46, BNU.
S. H. Lee, S. R. Lee, and Y. S. Lee, "Interpretation for band-type indication on radiography of 9% Ni steel welds for LNG storage tanks," Journal of Korea Society for Nondestructive Testing, vol. 30, no. 5, pp. 479-483, 2010.
S. R. Lee, et.al, "A study on the improvement of radiographic test method on 9% Ni steel welds for LNG storage tanks," Topical Conference on Natural Gas Utilization 2008, pp. 49-56, 2008.
C. K. Kim, "A study on the integrated control and safety management system for 9% Ni steel LNG storage tank," Journal of the Korean Institute of Gas, vol. 14, no. 5, pp. 13-18, 2010.
J. T. Choi, "Study on Ni-alloyed weld metals deposited by squarewave AC power source for 9% Ni steel LNG storage tank," Ulsan University, Master paper, 2008.
D. H. Choi, "Study on microstructure and mechanical properties of friction stir welded 9% Ni steel," KWJS 2009 annual autumn conference, 2009.
H. S. Kim, "Investigation of welding joint-design and technique for 9% Ni steel," Journal of KWS, vol. 20, no. 5, pp. 605-611, 2002.
M. Kazuyoshi, "LNG storage tanks," Journal of JWS, vol. 75, no. 5, pp. 363-365, 2006.
I. Tooru and N. Yoshihito, "Welding technology for construction of LNG storage tanks," Journal of JWS, vol. 76, no. 1, pp. 44-47, 2007.
H. Shuichi, et.al, "Construction of the above-ground LNG storage tank made of 7% Ni TMCP steel," Jnl. of JWS, vol. 83, no. 8, pp. 623-628, 2014.
K. Masakazu, "Application study of ultrasonic testing method for 9% Ni steel LNG storage tank," JPHI vol. 43, no. 2, pp. 92-101, 2006.
J. G. Kim, J. H. Lee, J. J. Kim, B. C. Bae, I. W. Park, and K. J. Kim, "Development of welding robot for corner-piece in LNG ship," Journal of Welding and Joining, vol. 28, no. 2, pp. 147-151, 2010.
K. S. Kim, "An experimental study on the tensile and fatigue strengths of SUS304L lap joint weld at the cryogenic temperature," Journal of Ocean Engineering and Technology vol. 22, no. 3, pp. 96-102, 2008.
H. M. Kwon, et.al., "Effects of high current and welding wire diameter on the magnesium vaporization and mechanical properties of Al5083 arc welds," Journal of KWJS vol. 36, no. 6, pp. 84-89, 2013.
Y. B. Choi, M. J. Kang, D. C. Kim, and I. S. Hwang, "High current arc welding technology of aluminum alloy," Journal of KWJS vol. 31, no. 1, pp. 21-25, 2013.
Anonymous, Hyundai "Heavy Industries to Develop Welding Technology for Polar LNG Carriers", Welding Journal, vol. 89, no. 11, 2010.
O. Baba, Y. Okumoto, and A. Abe, "Improvement of bead shape of fillet welding for aluminum alloy tank of SPB LNG carrier," Collected papers of Japan Ship and Ocean Engineering Society, no. 5, pp. 77-84, 2007.
O. Baba, Y. Okumoto, and A. Abe, "Improvement of butt welding for aluminum alloy tank of SPB LNG carrier," Collected papers of Japan Ship and Ocean Engineering Society, no. 5, pp. 91-97, 2007.
M. Nishio, "Application of advanced nondestructive inspection technology to LNG tanks for LNG carriers," Journal of Light Metal Welding, vol. 48, no. 10, pp. 377-380, 2010.
D. S. Zhao, Y. J. Liu, X. D. Wang, and Z. S. Ji, "The calculation and measurement of welding residual stress for invar steel of a liquefied natural gas carrier's containment system," Journal of Ship Production and Design, vol. 31, no. 1, pp. 43-48, 2015.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.