최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.33 no.5, 2016년, pp.409 - 417
김민 (고려대학교 기계공학과) , 우주연 (고려대학교 기계공학과) , 윤준호 (인하대학교 물리학과) , 황보창권 (인하대학교 물리학과) , 한창수 (고려대학교 기계공학과)
It is well known that Morpho butterflies show distinctive, brilliant and iridescent colors and have micro-nano scale structures, instead of dyes and pigments, on their wings. This structural coloration is regarded as a novel technique to express color with a long lifetime, ease and precise tenabilit...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
마이크로 스케일 영역의 역할은? | 최근 다양한 나노 소재1와 나노 기술2,3을 활용한 자연 모사를 위한 시도와 개발 등으로 인해 이전에 비해 마이크로 기술에 대한 연구가 적어지긴 했으나, 여전히 마이크로 스케일 영역은 나노 기술에 비해 상대적으로 용이하게 구현이 가능함과 동시에, 산업과 생활 전반에서 최소 단위의 가공 및 관리 가능한 공차 한도 규격으로서 효과적이고도 중요한 역할을 수행하고 있다. | |
모포 나비 날개의 구조 색은 어떻게 인정받고 있는가? | 모포 나비 날개 (Morpho Butterfly’s Wings)의 독특한 구조4-8에 의해 발현되는 화려하면서도 깊은 푸른 색은 그 원리가 3차원 구조의 마이크로-나노 스케일로 이루어진 구조 색 (Structural Color)4,5임이 밝혀졌으며, 이후 다양한 시뮬레이션6과 모사 제작8,9등에 대한 연구가 활발히 이루어졌다. 이와 같은 구조 색의 독특한 특징은 시간의 흐름에 따라 색이 변화하는 현상을 가진 기존의 안료나 염료시 장에 있어서 새로운 가치를 부가할 수 있는 기술로 그 가능성을 인정받고 있지만, 이러한 나노 기술의 구현 방법은 대부분 고도화 된 반도체 기술10이 필요하기 때문에, 색을 제작하는 현재의 대량 생산 기술11,12과는 비교할 수 없는 높은 비용과 환경 악영향13에 대한 검증 등이 요구된다. | |
모포 나비 날개 (Morpho Butterfly’s Wings)의 독특한 구조4-8에 의해 발현되는 푸른 색의 원리는 무엇인가? | 모포 나비 날개 (Morpho Butterfly’s Wings)의 독특한 구조4-8에 의해 발현되는 화려하면서도 깊은 푸른 색은 그 원리가 3차원 구조의 마이크로-나노 스케일로 이루어진 구조 색 (Structural Color)4,5임이 밝혀졌으며, 이후 다양한 시뮬레이션6과 모사 제작8,9등에 대한 연구가 활발히 이루어졌다. 이와 같은 구조 색의 독특한 특징은 시간의 흐름에 따라 색이 변화하는 현상을 가진 기존의 안료나 염료시 장에 있어서 새로운 가치를 부가할 수 있는 기술로 그 가능성을 인정받고 있지만, 이러한 나노 기술의 구현 방법은 대부분 고도화 된 반도체 기술10이 필요하기 때문에, 색을 제작하는 현재의 대량 생산 기술11,12과는 비교할 수 없는 높은 비용과 환경 악영향13에 대한 검증 등이 요구된다. |
Haynie, D. T., Palath, N., Liu, Y., Li, B., and Pargaonkar, N., "Biomimetic Nanostructured Materials: Inherent Reversible Stabilization of Polypeptide Microcapsules," Langmuir, Vol. 21, No. 3, pp. 1136-1138, 2005.
Arlett, J., Myers, E., and Roukes, M., "Comparative Advantages of Mechanical Biosensors," Nature Nanotechnology, Vol. 6, No. 4, pp. 203-215, 2011.
Buzea, C., Pacheco, I. I., and Robbie, K., "Nanomaterials and Nanoparticles: Sources and Toxicity," Biointerphases, Vol. 2, No. 4, pp. MR17-MR71, 2007.
Tada, H., Mann, S. E., Miaoulis, I. N., and Wong, P. Y., "Effects of a Butterfly Scale Microstructure on the Iridescent Color Observed at Different Angles," Optics Express, Vol. 5, No. 4, pp. 87-92, 1999.
Kinoshita, S., Yoshioka, S., and Kawagoe, K., "Mechanisms of Structural Colour in the Morpho Butterfly: Cooperation of Regularity and Irregularity in an Iridescent Scale," The Royal Society Publishing: Proceedings B, Vol. 269, No. 1499, pp. 1417-1421, 2002.
Siddique, R. H., Diewald, S., Leuthold, J., and Holscher, H., "Theoretical and Experimental Analysis of the Structural Pattern Responsible for the Iridescence of Morpho Butterflies," Optics Express, Vol. 21, No. 12, pp. 14351-14361, 2013.
Wang, W., Zhang, W., Gu, J., Liu, Q., Deng, T., et al., "Design of a Structure with Low Incident and Viewing Angle Dependence Inspired by Morpho Butterflies," Scientific Reports, Article No. 3427, 2013.
Huang, J., Wang, X., and Wang, Z. L., "Controlled Replication of Butterfly Wings for Achieving Tunable Photonic Properties," Nano Letters, Vol. 6, No. 10, pp. 2325-2331, 2006.
Gao, Y., Peng, Z., Shi, T., Tan, X., Zhang, D., et al., "Bio-Inspired Fabrication of Complex Hierarchical Structure in Silicon," Journal of Nanoscience and Nanotechnology, Vol. 15, No. 8, pp. 5918-5923, 2015.
Moore, G. E., "Cramming More Components onto Integrated Circuits," Electronics, Vol. 38, No. 8, pp. 114-117, 1965.
Yoshikawa, H., Taniguchi, J., Tazaki, G., and Zento, T., "Fabrication of High-Aspect-Ratio Pattern via High Throughput Roll-to-Roll Ultraviolet Nanoimprint Lithography," Microelectronic Engineering, Vol. 112, pp. 273-277, 2013.
Bender, M., Otto, M., Hadam, B., Vratzov, B., Spangenberg, B., et al., "Fabrication of Nanostructures Using a UV-Based Imprint Technique," Microelectronic Engineering, Vol. 53, No. 1, pp. 233-236, 2000.
Krug, H. F. and Wick, P., "Nanotoxicology: An Interdisciplinary Challenge," Angewandte Chemie International Edition, Vol. 50, No. 6, pp. 1260-1278, 2011.
Choi, S. Y., Mamak, M., Von Freymann, G., Chopra, N., and Ozin, G. A., "Mesoporous Bragg Stack Color Tunable Sensors," Nano Letters, Vol. 6, No. 11, pp. 2456-2461, 2006.
Brandrup, J., Immergut, E. H., Grulke, E. A., Abe, A., and Bloch, D. R., "Polymer Handbook," Wiley New York, p. 2, 1999.
Lee, M. J. and Kim, Y. S., "Fabrication of Replica Polymer Mold for Imprint Lithography," Electronic Materials Letters, Vol. 3, No. 3, pp. 155-162, 2007.
Kanamori, Y., Katsube, H., Furuta, T., Hasegawa, S., and Hane, K., "Design and Fabrication of Structural Color Filters with Polymer-Based Guided-Mode Resonant Gratings by Nanoimprint Lithography," Japanese Journal of Applied Physics, Vol. 48, No. 6S, Paper No. 06FH04, 2009.
Chung, K., Yu, S., Heo, C. J., Shim, J. W., Yang, S. M., et al., "Flexible, Angle-Independent, Structural Color Reflectors Inspired by Morpho Butterfly Wings," Advanced Materials, Vol. 24, No. 18, pp. 2375-2379, 2012.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.