최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국지진공학회논문집 = Journal of the Earthquake Engineering Society of Korea, v.20 no.3, 2016년, pp.145 - 153
김태완 (강원대학교 건축공학과) , 추유림 (강원대학교 건축공학과) , 박홍근 (서울대학교 건축학과) , 신영수 (이화여자대학교 건축학부)
Small-size buildings are not designed by professional structural engineers in Korea. Therefore, their seismic performance can not be exactly estimated because their member sizes and reinforcement may be over- or under-designed. A prescriptive design criteria for the small-size buildings exists, but ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
소규모 건축물의 구조안정성을 확보하는 최선의 방법은 무엇인가? | 소규모 건축물의 구조안정성을 확보하는 최선의 방법은 건축물의 층수및 규모에 관계없이 전문가인 건축구조기술사의 구조설계를 의무화하는 것이나 여러 이유로 실현되지 않고 있다. 오히려 정부에서는 소규모 건축물에 대해서는 ‘소규모 건축물 구조 규칙’[1]을 제정하였는데, 이는 사양기반 설계법으로서 제시된 절차에 따라 부재를 결정하면 건축구조기술사의 구조해석을 통한 구조설계 없이도 일정한 구조안정성을 확보하는 것으로 간주하는 것이다. | |
소규모 건축물이란? | 소규모 건축물은 ‘층수 2층 이하, 연면적 1,000m2 미만’의 건축물을 의미하며 현재 건축 허가 대상이 아닌 신고 대상이다. 따라서 이들 소규모 건축물은 건축구조기술사의 전문적인 구조시스템 및 구조상세 설계 없이 주로 건축사의 경험에 의한 구조시스템 및 구조상세가 적용되어 실제 이들의 구조적 성능이 어느 정도인지 확인이 어려운 실정이다. | |
필로티 층 외 구조의 초과강도를 추가적으로 고려하여 내진설계를 수행한다는 것은 무엇을 의미하는가? | 이는 필로티 층 외 구조의 초과강도를 추가적으로 고려하여 내진설계를 수행하는 것이다. 즉, 일반적인 구조시스템에 비해 지진하중을 더 크게 고려한다는 의미다. 따라서 필로티 시스템을 사양기반구조설계기준에서 규정하는 것은 적절하지 않은 것으로 판단되나 명확한 결론을 위해서는 보다 심도 있는 연구가 필요하다. |
KSEA. Structural design criteria and commentary for one and two story small buildings. Seoul, Korea: Korean Structural Engineers Association; c2012. 69p.
KBC2009. Korean building code-structural. Seoul, Korea: Architectural Institute of Korea; c2009. 772p.
Shin, YS. A white book on structural safety of small-size buildings. Ewha Womans University. c2015. 200p.
AIK. Guidelines for performance-based seismic design of residential buildings. Seoul, Korea: Architectural Institute of Korea; c2015. 53p.
CSI. Perform-3D, Nonlinear analysis and performance assessment for 3D structures, user guide version 4. Berkeley, CA: Computers and Structures Inc.; c2006. 336p.
Pacific Earthquake Engineering Research Center. Ground motion data base. Available from: http://ngawest2.berkeley.edu/
ATC-19. Structural response modification factors. Redwood City, California: Applied Technology Council; c1995.
Newmark NM, Hall WJ. Earthquake spectra and design. Engineering monograph; Earthquake Engineering Research Institute, Berkeley, California; c1982.
Krawinkler H, Nassar AA. Seismic design based on ductility and cumulative damage demand and capacities. Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings, New York, USA; c1992. p. 27-47.
Fajfar P. A Nonlinear analysis method for performance based seismic design. Earthquake spectra. 2000;16(3):573-92.
Priestley MJN. Displacement-based seismic assessment of existing reinforced concrete buildings. Proc. Pacific Conf. on Earthquake Engineering, University of Melbourne, Victoria, Australia; 1995: 225-244.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.