최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.25 no.2, 2016년, pp.96 - 101
허하리 (국민대학교 신소재공학부) , 권혁우 (국민대학교 신소재공학부) , 구본우 (국민대학교 신소재공학부) , 김용석
The current study was conducted to elucidate the effect of cementite morphology and matrix-ferrite microstructure on sliding wear behavior in spheroidized high carbon (1wt. % C) steel. The high carbon steel was initially heat treated to obtain a full pearlite or a martensite microstructure before th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
H. K. D. H. Bhadeshia, 2012, Steels for Bearings, Prog. Mater Sci, Vol. 57, No. 2, pp. 268~435.
Y. Wang, T. Lei, J. Liu, 1999, Tribo-metallographic Behavior of High Carbon Steels in Dry Sliding II. Microstructure and Wear, Wear, Vol. 231, No. 1, pp. 12~19.
K.-H. Zum Gahr, 1987, Microstructure and Wear of Materials, Elsevier, Amsterdam, pp. 351~353.
A. Kamyabi-Gol, M. Sheikh-Amiri, 2010, Spheroidizing Kinetics and Optimization of Heat Treatment Parameters in CK60 Steel Using Taguchi Robust Design, J. Iron. Steel Res. Int., Vol. 17, No. 4, pp. 45~52.
A. Saha, D. K. Mondal, J. Maity, 2010, Effect of Cyclic Heat Treatment on Microstructure and Mechanical Properties of 0.6wt% Carbon Steel, Mater. Sci. Eng. A, Vol. 527, No.16-17, pp. 4001~4007.
I. M. Hutchings, 1992, Tribology: Friction and Wear of Engineering Materials, Edward Arnold, pp. 133~134.
K. K. Ray, V. Tppo, S. B. Singh, 2006, Influence of Pre-strain on the Wear Resistance of a Plain Carbon Steel, Mater. Sci. Eng. A, Vol. 420, No. 1-2, pp. 333~341.
F. Katsuki, M. Yonemura, 2007, Subsurface Characteristics of an Abraded Fe-0.4 wt% C Pearlitic Steel: A Nanoindentation Study, Wear, Vol. 263, No. 7-12, pp. 1575~1578.
A. Sundström, J. Rendón, M. Olsson, 2001, Wear Behavior of Some Low Alloyed Steels under Combined Impact/abrasion Contact Conditions, Wear, Vol. 250, No. 1-12, pp. 744~754.
S. H. Kim, Y.-S. Kim, 1999, Effect of Ductility on Dry Sliding Wear of Medium Carbon Steel under Low Load Conditions, Met. Mat. Int., Vol. 5, No. 3, pp. 267~271.
J. H. Kim, K. H. Ko, S. D. Noh, G. G. Kim, S. J. Kim, 2009, The Effect of Boron on the Abrasive Wear Behavior of Austenitic Fe-based Hard Facing Alloys, Wear, Vol. 267, No. 9-10, pp. 1415~1419.
O. P. Modi, D. P. Mondal, B. K. Prasad, M. Singh, H. K. Khaira, 2003, Abrasive Wear Behavior of a High Carbon Steel: Effects of Microstructure and Experimental Parameters and Correlation with Mechanical Properties, Mater. Sci. Eng., A, Vol. 343, No. 1-2, pp. 235~242.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.