최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.25 no.3, 2016년, pp.155 - 160
이상익 (한국기계연구원 부설 재료연구소) , 김병민 (부산대학교 기계공학부) , 임성곤 (센트랄 중앙연구소) , 이정환
Magnesium(Mg) alloys have been evaluated as replacements for steel or aluminum parts in the automobile industry because of the fuel economy they can provide through reducing weight. The application of Mg alloys has been limited due to its low formability at room temperature, which results from a sma...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
J. H. Yoon, J. S. Lee, J. H. Lee, 2013, Enhancement of the Microstructure and Mechanical Properties in as-forged Mg–8Al–0.5Zn Alloy using T5 Heat Treatment, Mater. Sci. Eng. A, Vol. 586, pp. 306~312.
J. H. Yoon, J. H. Lee, Process Design of Warm-Forging with Extruded Mg-8Al-0.5Zn Alloy for Differential Case in Automobile Transmission, Int. J. Precis. Eng. Manuf., Vol. 16, No. 4, pp. 841~846.
J. H. Yoon, J. H. Lee, 2014, Effect of Initial Microstructure on Mg Scroll Forging under Warm Forming Condition, Mater. Trans, Vol. 55, No. 2, pp. 238 ~244.
S. I. Lee, J. H. Yoon, J. H. Lee, 2014, Mg Scroll Forging with AZ80 under Warm Forming Condition, Int. J. Precis. Eng. Manuf., Vol. 15, No. 7, pp. 1473~1477.
J. H. Lee, S. H. Kang, D.Y. Yang, 2008, Novel Forging Technology of a Magnesium Alloy Impeller with Twisted Blades of Micro-thickness, CIRP Ann-Manuf. Technol, Vol. 57, pp. 261~264.
J. H. Yoon, S. H. Park, 2014, Forgeability Test of Extruded Mg–Sn–Al–Zn Alloys under Warm Forming Conditions, Mater. Des, Vol. 55, pp. 300~308.
J. Liu, Z. Cui, 2009, Hot Forging Process Design and Parameters Determination of Magnesium Alloy AZ31B Spur Bevel Gear, J. Mater. Process. Technol., Vol. 209, No. 18, pp. 5871~5880.
J. Jiang, Y. Wang, Y. Li, W. Shan, S. Luo, 2012, Microstructure and Mechanical Properties of the Motorcycle Cylinder Body of AM60B Magnesium Alloy Formed by Combining die Casting and Forging, Mater. Des, Vol. 37, pp. 202~210.
A. Dziubińska, A. Gontarza, K. Horzelska, P. Pieśkoa, 2015, The Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Aircraft Brackets Produced by a New Forging Technology, Procedia Manuf., Vol. 2, pp. 337~ 341.
S. H. Park, H. S. Kim, B. S. You, Extrudability and Tensile Properties of the Mg-7Sn-1Al-1Zn Alloy, Korean. J. Met. Mater, Vol. 51, No. 9, pp. 637~644.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.