최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국마린엔지니어링학회지 = Journal of the Korean Society of Marine Engineering, v.40 no.4, 2016년, pp.314 - 319
김관우 (Department of Mechanical Engineering, Chungbuk National University) , 이근태 (Department of Precision Mechanical Engineering, Chungbuk National University) , 조해용 (Department of Mechanical Engineering, Chungbuk National University)
Flange bolt has a circular flange under the head that acts like a washer to distribute the clamping load over a large area. Flange bolt has usually been manufactured by cold forging. Flower shape defect occurs in the flange forging stage. This defect causes lack of dimensional accuracy and low quali...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
플랜지의 단조 시 발생할 수 있는 결함은? | 플랜지 볼트는 체결하중을 분산시키기 위한 와셔와 같은 역할을 하는 플랜지를 가지고 있으며, 주로 냉간단조로 성형된다. 플랜지의 단조 시 꽃무늬 모양의 결함이 발생할 수 있다. 이 결함은 치수 정밀도 및 품질 저하 등의 문제점을 야기할 수 있어 이에 대한 개선이 요구된다. | |
플랜지 볼트의 특징은? | 플랜지 볼트는 체결하중을 분산시키기 위한 와셔와 같은 역할을 하는 플랜지를 가지고 있으며, 주로 냉간단조로 성형된다. 플랜지의 단조 시 꽃무늬 모양의 결함이 발생할 수 있다. | |
꽃무늬 모양의 결함이 야기할 수 있는 문제점은? | 플랜지의 단조 시 꽃무늬 모양의 결함이 발생할 수 있다. 이 결함은 치수 정밀도 및 품질 저하 등의 문제점을 야기할 수 있어 이에 대한 개선이 요구된다. 본 논문에서는 플랜지 볼트의 플라워 형상 결함을 개선하기 위한 금형 설계방법을 제안하고자 하였다. |
K. H. Kim, D. B. Kim, I. H. Lee, and H. Y. Cho, "Prediction of dimensional accuracy of flange bolt in cold forging using finite element Mmthod," Journal of Industrial Science and Technology Institute, vol. 28, no. 2, pp. 55-61, 2014 (in Korean).
T. H. Kim, B. M. Kim, and J. C. Choi, "Methodology of tool analysis to improve the accuracy of cold forged parts," Journal of the Korean Society for Precision Engineering, vol. 12, no. 1, pp. 29-37, 1995 (in Korean).
U. J. Jung, J. J. Lee, and G. J. Park, "A preliminary study on the optimal shape design of the axisymmetric forging component using equivalent static loads," Transactions of the Korean Society of mechanical engineers A, vol. 35, no. 1, pp. 1-10, 2011 (in Korean).
J. W. Kim, S. W. Chae, S. S. Han, and Y. H. Son, "Manufacturing process design of aluminum alloy bolt," Journal of the Korean Society for Precision Engineering, vol. 27, no. 5, pp. 63-68, 2015 (in Korean).
D. C. Ko, W. H. Hwang, S. K. Lee, and B. M. Kim, "A study on the method of residual stress relaxation during wire drawing and evaluation of residual stress using nano indentation test," Journal of the Korean Society of Precision Engineering, vol. 23 no. 5, pp. 162-169, 2006 (in Korean).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.