최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.29 no.3, 2016년, pp.253 - 260
박효선 (연세대학교 건축공학과) , 최세운 (대구가톨릭대학교 건축학부)
In this paper, the optimal seismic design method for inducing the beam-hinge collapse mechanism of steel moment frames is presented. This uses the non-dominated sorting genetic algorithm II(NSGA-II) as an optimal algorithm. The constraint condition for preventing the occurrence of plastic hinges at ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
건축물에 지진하중이 발생시 어떤 영향이 있는가? | 건축물에 지진하중이 발생하면 기둥, 보와 같은 건축물을 구성하는 구조부재 내에서는 외부 하중에 저항하기 위해 부재력과 변형이 발생하게 된다. 동일한 형태의 건축물일지라도 부재의 크기 및 재료의 특성에 따라 구조물의 반응은 달라진다. | |
설계 철학에 따라 동일한 지진하중이더라도 어떤 반응을 보일 수 있는가? | 동일한 형태의 건축물일지라도 부재의 크기 및 재료의 특성에 따라 구조물의 반응은 달라진다. 즉, 설계 철학에 따라 동일한 지진하중에 대해서도 탄성거동을 하도록 할 수 있고, 혹은 비탄성거동을 허용하여 항복, 영구변형 등이 발생하도록 할 수 있다. | |
철골모멘트골조의 힘의 흐름과 소성힌지 분포는 무엇에 영향을 받는가? | 철골모멘트골조는 보와 기둥의 변형을 통해 지진하중에 대하여 저항을 하게 되는데, 보와 기둥의 상대적 강성비와 강도비에 따라서 구조성능이 좌우된다. 기둥-보 접합부의 강성비 및 강도비에 따라서 힘의 흐름과 소성힌지 분포가 달라진다. |
ACI Committee 318 (2005) Building Code Requirements for Structural Concrete(ACI 318-05) and Commentary(ACI 318R-05), American Concrete Institute.
AISC (2005) Seismic Provisions for Structural Steel Buildings(ANSI/AISC 341-05), Chicago(IL): American Institute of Steel Construction.
AISC (2005) ANSI/AISC 360-05 Specification for Structural Steel Buildings, American Institute of Steel Construction.
ASCE 7-05 (2005) Minimum Design Loads for Buildings and other Structures, SEI/ASCE Standard No.7-05, ASCE.
Bruneau, M., Uang, C. M., Sabelli, R. (1997) Ductile Design of Steel Structures, McGraw-Hill.
Choi, S.W., Park, H.S. (2102) Multi-objective Seismic Design Method for Ensuring Beam-hinging Mechanism in Steel Frames, J. Constr. Steel Res., 74, pp.17-25.
Choi, S.W., Yang, H.J., Park, H.S. (2010) Development of Optimal Seismic Design Model for Inverted V-type Special Concentrically Braced Frames, J. Comput. Struct. Eng. Inst. Korea, 23, pp.111-120.
Deb, K., Pratap, A., Agarwal, S., Meyarivan, T. (2002) A Fast and Elitist Multiobjective Genetic Algorithm: NSGA-II, IEEE Trans. Evol. Comput., 6, pp.182-197.
Dooley, L., Bracci, J.M. (2001) Seismic Evaluation of Column-to-Beam Strength Ratios in Reinforced Concrete Frames, ACI Struct. J., 98, pp.834-851.
FEMA 355C (2000) State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquake Ground Shaking, Federal Emergency Management Agency.
FEMA 356 (2000) Prestandard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agent.
Foutch, D.A. Yun, S. (2002) Modeling of Steel Moment Frames for Seismic Loads, J. Constr. Steel Res., 58, pp.529-564.
Gupta A., Krawinkler, H. (1999) Seismic Demands for Performance Evaluation of Steel Moment Resisting Frame Structures. The John A. Blume Earthquake Engineering Center, Report No.132.
Hasan, R., Xu, L. Grierson, D.E. (2002) Push-over Analysis for Performance-based Seismic Design, Comput. & Struct., 80, pp.2483-2493.
Krawinkler, H., Mohasseb, S. (1987) Effects of Panelzone Deformations on Seismic Response, J. Constr. Steel Res., 8, pp.233-250.
Kuntz, G.L., Brouning, J. (2003) Reduction of Column Yielding during Earthquakes for Reinforced Concrete Frames, ACI Struct. J., 100, pp.573-580.
Lee, H. (1996) Revised Rule for Concepts of Strong-Column Weak-Girder Design, J. Struct. Eng., 122, pp.359-364.
Medina, R.A., Krawinkler, H. (2005) Strength Demand Issues Relevant for the Seismic Design of Moment-resisting Frames, Earthq. Spectra, 21, pp.415-439.
Nakashima, M., Sawaizumi, S. (2000) Column-to-Beam Strength Ratio Requied for Ensuring Beam- Collapse Mechanisms in Earthquake Responses of Steel Moment Frames, Proc. 12th World Conf. Earthq. Eng..
Park, R., Paulay, T. (1975) Reinforced Concrete Structure, John Wiley and Sons.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.