최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국화재소방학회 논문지= Fire science and engineering, v.31 no.6, 2017년, pp.8 - 15
구재학 (우석대학교 소방안전학과) , 황철홍 (대전대학교 소방방재학과)
Most fire victims succumb to smoke inhalation, and fire smoke toxicity from interior materials is increasing with increased use of plastics. Large amounts of hazardous effects of smoke are related to deposition of smoke particles in respiratory tracts, and deposition characteristics are influenced b...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
플라스틱에 대해 연기입자 크기분포 측정실험의 수행 내용은 무엇인가? | 이에 따라, 본 연구에서는 다른 플라스틱들도 연기입자 크기분포에서 PP와 같은 특성을 보이는지 알아보기 위해서 대표적인 4가지 플라스틱(LDPE, PA66, PMMA, PVC)에 대하여 연기입자 크기분포 측정실험을 수행하였다. 특정 조건에서 연소생성물을 균일하게 생성하고 분석하기 위하여 ISO/TS 19700 기준에 따른 등속튜브연소로를 이용하여 연소로의 온도와 산소공급량에 따라 다양한 화재조건에서 연기입자를 균일하게 발생시키고, 정전저압 임팩터를 사용하여 연기입자의 크기에 따른 개수농도를 실시간으로 측정하였다. 실험 결과 4가지 플라스틱의 연기입자 크기분포 특성은 여러 측면에서 PP와 유사하며 목재와는 확연히 다르게 나타났다. | |
연기에 의한 인체피해의 특징은 무엇인가? | 화재발생 시에 대부분의 인명 피해는 연기에 의해 발생되는데, 최근 건축 내장재에서 차지하는 플라스틱의 양이 많아지며 발생되는 연기의 유독성이 점차적으로 증가되고 있다. 연기에 의한 인체피해의 상당부분은 흡입연기의 폐침전과 관련이 있으며, 연기입자의 크기분포는 폐침전 특성에 직접적인 영향을 미친다. 따라서 플라스틱 종류에 따른 연기입자의 크기별 발생량 검토는 폐침전에 의한 인체피해 연구에 필수적으로 요구된다. | |
연기입자에 유독가스가 흡착되는 양상이 영향을 받는 것은 무언인가? | 이때 고체상은 주로 미연탄소(unburned carbon)에 여러 유독가스를 포함한 가스가 흡착된 연기입자들로 이루어져 있다. 연기입자에 유독가스가 흡착되는 양상은 가스의 화학적 특성과 더불어 입자의 조성이나 크기 및 형상 등에 영향을 받는데, 이 입자들은 각 가연물의 화학적 조성과 화재조건, 즉 연소로의 온도와 산소 공급량 등에 따라 구형 또는 불규칙 형태의 단일입자 또는 이들의 군집형태 등 다양한 크기와 형태의 물리적 특성을 가지게 된다. 유기증기(organic vapor) 및 미연탄소로부터 생성되는 연기입자는 화재 조건별로 Figure 1에 도시한 바와 같이 전구체(precursor)가 핵생성(nucleation) 및 응축(condensation) 등을 거쳐서 단구형(singlet)의 초기입자(primary particle)를 생성하고, 그 후이들이 응고(coagulation), 집합(aggregation), 파손(breakage) 및 합체(coalescence) 등의 복합적인 과정을 거치면서 응집체(agglomerates)로 성장한다. |
R. G. Gann, J. D. Averill, K. M. Butler, W. W. Jones, G. W. Mulholland, J. L. Neviaser, T. J. Ohlemiller, R. D. Peacock, et al., "International Study on the Sublethal Effects of Fire Smoke on Survivability and Health: Phase I Final Report", NIST Technical Note 1439 (2001).
A. K. Bolling, J. Pagel, K. E. Yttri, L. Barregard, G. Sallsten, P. E. Schwarze and C. Boman, "Health Effects of Residential Wood Smoke Particles: The Importance of Combustion Conditions and Physicochemical Particle Properties", Particle and Fibre Toxicology, Vol. 6, pp. 29-48 (2009).
T. Hertzberg and P. Blomqvist, "Particles from Fires : a Screening of Common Materials Found in Buildings", Fire and Materials, Vol. 27, No. 6, pp. 295-314 (2003).
S. K. Friedlander, "Smoke, Dust and Haze: Fundamentals of Aerosol Dynamics", Oxford Univ. Press, Oxford (2000).
K. M. Butler and G. W. Mulholland, "Generation and Transportation of Smoke Components", Fire Technology, Vol. 40, No. 2, pp. 149-176 (2004).
R. B. Diemer Jr. and J. H. Olson, "Bivariate Moment Methods for Simultaneous Coagulation, Coalescence and Breakup", Journal of Aerosol Science, Vol. 37, No. 3, pp. 363-385 (2006).
E. R. Weibel, "Morphometry of the Human Lung", Academic Press Inc., Springer-Verlag, New York (1963).
W. C. Hinds, "Aerosol Technology", John Wiley & Sons, Inc., New York (1982).
H. K. Chang and M. Paiva, "Respiratory Physiology: an Analytical Approach", Marcel Dekker, Inc., New York (1989).
R. F. Phalen, "Inhalation Studies: Foundations and Techniques", 2nd Edition, Informa Healthcare, New York (2009).
J. Goo, "Development of the Size Distribution of Smoke Particles in a Compartment Fire", Fire Safety Journal, Vol. 47, No. 1, pp. 46-53 (2012).
Dekati Ltd., "ELPI USER MANUAL Ver. 1.14", Finland (2011).
ISO/TS 19700, "Controlled Equivalence Ratio Method for the Determination of Hazardous Components of Fire Effluents", (2006).
T. R. Hull and K. T. Paul, "Bench-scale Assessment of Combustion Toxicity : a Critical Analysis of Current Protocols", Fire Safety Journal, Vol. 42, No. 5, pp. 340-365 (2007).
J. A. Purser, D. A. Purser, A. A. Stec, C. Moffatt, T. R. Hull, J. Z. Su, M. Bijloos and P. Blomqvist, "Repeatability and Reproducibility of the ISO/TS 19700 steady state tube furnace", Fire Safety Journal, Vol. 55, pp. 22-34 (2013).
P. Blomqvist, T. Hertzberg, H. Tuovinen, K. Arrhenius and L. Rosell, "Detailed Determination of Smoke Gas Contents using a Small-scale Controlled Equivalence Ratio Tube Furnace Method", Fire and Materials, Vol. 31, No. 8, pp. 495-521 (2007).
J. Goo, "Studies on the Morphology of Smoke Particles for Each Type of Fire by Using Steady State Tube Furnace", Fire Science and Engineering, Vol. 28, No. 1, pp. 44-51 (2014).
J. Goo, "Study on the Real-time Size Distribution of Smoke Particles for each Fire Stage by Using a Steady-state Tube Furnace Method," Fire Safety Journal, Vol. 78, pp. 96-101 (2015).
J. Rhodes, C. Smith and A. A. Stec, "Characterisation of Soot Particulates from Fire Retarded and Nanocomposite Materials, and Their Toxicological Impact," Polymer Degradation and Stability, Vol. 96, No. 3, pp. 277-284 (2011).
A. A. Stec et. al., "Analysis of Toxic Effluents Released form PVC Carpet under Different Fire Conditions," Chemosphere, Vol. 90, No. 1, pp. 65-71 (2013).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.