최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國鋼構造學會 論文集 = Journal of Korean Society of Steel Construction, v.29 no.6, 2017년, pp.423 - 434
김주우 (세명대학교, 건축공학과) , 이성주 (세명대학교, 건축공학과)
In this paper a systematic numerical analysis is performed to obtain the hysteresis behavior of partially restrained top and seat angle connections subjected to cyclic loading. This connection includes superelastic shape memory alloy (SMA) angles and rods in order to secure the recentering capacitie...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
상‧ 하부 ㄱ형강 접합부는 어디에 적합한가? | 부분강접 접합부는 힌지접합형식에 일부 보강만으로 수평 강성 확보가 가능하며 사용하중 하에서 강접합과 유사한 거동을 보인다. 상‧ 하부 ㄱ형강 접합부는 부분강접 접합부의 한 형태로 중‧ 저층 건물에 적합하다. 이러한 상‧ 하부 ㄱ형강 접합부는 실험적 연구[2],[3],[4]를 통하여 접합부의 전단, 휨 모멘트 지지능력, 강도 및 강성이 ㄱ형강의 두께와 길이, 볼트의 개수와 직경, 용접 길이와 강도 등에 의하여 주로 영향을 받으며, 이러한 변수들에 따라서 다양한 접합부의 파괴양상을 나타내는 것을 밝혔다. | |
CFT구조의 장점은? | 또한, CFT(Concrete Filled Steel Tube)구조는 원형 혹은 각형단면의 강관내부에 콘크리트를 충전한 구조로 강관과 충전콘크리트의 상호 합성 작용에 의해서 압축 내력을 증가 시켜주며, 콘크리트는 강관의 국부좌굴을 감소 시켜주기 때문에 단면을 증가시키지 않아도 내력을 크게 증가시킬 수 있다. 따라서 이 구조는 강성, 내력, 변형성능, 내화, 시공 등의 측면에서 우수한 특성을 발휘하는 구조시스템 이다. 특히, 반복하중의 작용에 대해서는 우수한 내진성능을 발휘하고 경제성이 우수하며 범용성이 높기에 사용이 증가하고 있는 추세이긴 하나 우리나라에서는 콘크리트 충전성 확보 및 품질 검사 등의 어려움으로 인하여 실무에 많이 적용되는 구조시스템이 아니다. | |
형상기억합금이란? | 형상기억합금(Shape Memory Alloy, SMA)은 Fig. 1의 응력-변형률 관계[1]에서 보여지는 것과 같이 오스테나이트 상태(austenite phase)와 마르텐자이트 상태(martensite phase)의 상태변화에 의하여 물체의 고유형상을 기억하는 뛰어난 형상기억능력과 초탄성(superelastic) 복원능력을 나타내는 신재료이며, 변형이 발생한 후 원래의 형상으로 복원하는 와이어나 강봉, 또는 댐퍼의 형태로 강구조 건축물에 적용하여 에너지소산능력을 증가시켜 내진성능을 향상시킬 수 있다. 또한, 진동제어 및 충격흡수와 잔류변형이 없는 변형능력, 모멘트-회전각 능력, 내부식성 등에서 일반 강재보다 우수하다. |
Abolmaali, A., Treadway, J., Aswath, P., Lu. F.K., and Mc Carthy, E. (2006) Hysteresis Behavior of T-stub Connections with Superelastic Shape Memory Fasteners, Journal of the Constructional Steel Research, Vol.62, pp.831-838.
Hechtman, R.A. and Johnston, B.G. (1947) Riveted Semirigid Beam-to-column Building Connections, Progress Report No.1, AISC research at Lehigh University, Bathlehem, PA.
Altman, W.G., Azizinamini, A., and Bradburn, J.H. (1982) Moment-rotation Characteristics of Semi-rigid Steel Beamto-column Connections, Dept. of Civil Eng., Univ. of South Carolina, Columbia, SC.
Azizinamini, A., Bradburn, J.H., and Radziminski, J.B (1985) Static and Cyclic Behavior of Semi-rigid Steel Beamcolumn Connections, Structural Res. Studies, Dept. of Civil Eng., Univ. of South Carolina, Columbia, SC.
Roeder, C.W. and Dailey, R.H. (1989) The Results of Experients on Seat Beam Connections, Eng, J, AISC, Vol. 26, No.3, pp.90-95
Pirmoz, A., Mohammadrezapour, E., Seyed Khoei, A., and Saedi, D.A. (2009) Moment - Rotation Behavior of Bolted Top and Seat Angle Connections, Journal of Constructional Steel Research, Vol.65, pp.973-984.
Yang, J.G. and Jeon, S.S. (2009) Analytical Models for the Initial Stiffness and Plastic Moment Capacity of an Unstiffened Top and Seat Angle Connection under a Shear Load, International Journal of Steel Structures, Vol.9, No.3, pp.195-205.
양재근, 최정환, 김현광, 박재호(2011) 무보강 상.하부 ㄱ 형강 접합부의 소성휨모멘트 저항능력 예측을 위한 실험 및 해석적 연구, 한국강구조학회논문집, 제23권, 제5호, pp.547-555. Yang, J.G., Choi, J.H., Kim, H.K., and Park, J.H. (2011) Experimental Tests and Analytical Study for the Prediction of the Plastic Moment Capacity of an Unstiffened top and Seat Angle Connection, Journal of the Korean Society of Steel Construction, Vol.23, No.5, pp.547-555 (in Korean).
이성주, 김주우(2014) 상.하부 ㄱ형강 반강접 CFT 기둥-보 접합부의 단조 및 이력거동, 한국강구조학회논문집, 한 국강구조학회, 제26권, 제3호, pp.191-204. Lee, S.J. and Kim, J.W. (2014) Monotonic and Hysteresis Behavior of Semirigid CFT Column-to-beam Connections with a Top-seat Angle, Journal of the Korean Society of Steel Construction, Vol.26, No.3, pp.191-204.
Chen, W.F. (1987) Joint flexibility in steel frames, Elsevier Applied Science.
Chen, W.F. and Kishi, N. (1989) Moment - Ratation Relation of Top and Seat Angle Connections, Proc. of the Int. Colloquium on Bolted and Special Connections, Moscow, USSR, pp.15-20.
Chen. W.F. and Lui, E.M. (1991) Stability Desgin of Steel Frames, CRC Press.
Faella, C., Piluso, V., and Rizzano, G. (1996) Predication of the Flexural Resistance of Bolted Connections with Angles, IABSE Colloquium on Semi-rigid Structural Connections, pp.25-27.
Faella, C., Piluso, V., and Rizzano, G. (1998) Experimental Analysis of Bolted Connections: Snug vs. Preloaded Bolts, Journal of Environmental Engineering, ASCE, Vol.124, No.7, pp.765-774.
Faella, C., Piluso, V., and Rizzano, G. (2000) Structural Steel Semi-rigid Connections: Theory, Design and Software, CRC Press.
양재근, 백민창, 이재윤, 이형동(2014) SMA 강봉으로 체결된 angle의 에너지소산능력, 한국강구조학회논문집, 한국강구조학회, 제26권, 제3호, pp.231-240. Yang, J.G., Baek, M.C., Lee, J.Y., and Lee, H.D (2014) Energy Dissipation Capacity of the Angle Fastened by SMA Bars, Journal of the Korean Society of Steel Construction, Vol.26, No.3, pp.231-240.
김주우(2015) CFT 합성골조의 내진성능을 위한 스마트 반강접합의 이력거동, 한국강구조학회논문집, 한국강구조학회, 제27권, 제1호, pp.99-108. Kim, J.W. (2015) Hysteresis Behavior of Partially Restrained Smart Connections for the Seismic Performance of Composite Frame, Journal of the Korean Society of Steel Construction, Vol.27, No.1, pp.99-108.
Auricchio, F. and Sacco, E. (1997) A One-dimensional Mode; for Superelastic Shape-memory Alloy with Different Elastic Properties between Austenite and Martensite, International Journal of Non-Linear Mechanics, Vol.32, No.6, pp.1101-1114.
Auricchio, F., Taylor R.L., and Lubliner, J. (1997) Shapememory Alloy: Macromodelling and Numerical Simulations of the Superelastic Behavior, Computer Methods in Applied Mechanics and Engineering, Vol.146, pp.281-312.
ANSYS (2016) "Reference Manual", Ver. 17.2.
AISC (2006) Manual of Steel Construction, American Institute of Steel Construction, American Institute of steel Construtions, 13th Edition American Institute of steel Construction, Chicago.
DesRoches, R., McCormick, J., and Delemont, M. (2004) Cyclic Properties of Superelastic Shape Memory Alloy Wires and Bars, Journal of Structural Engineering, ASCE, Vol.130, No.1, pp.38-46. steel Frames, CRC Press.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.