$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Investigation of adding cement kiln dust (CKD) in ordinary and lightweight concrete

Advances in concrete construction, v.5 no.2, 2017년, pp.101 - 115  

Shoaei, Parham (Department of Civil Engineering, Sharif University of Technology) ,  Zolfaghary, Sina (Department of Civil Engineering, K.N. Toosi University of Technology) ,  Jafari, Navid (Department of Civil Engineering, Babol Noshirvani University of Technology) ,  Dehestani, Mehdi (Department of Civil Engineering, Babol Noshirvani University of Technology) ,  Hejazi, Manouchehr (Department of Civil Engineering, Amirkabir University of Technology)

Abstract AI-Helper 아이콘AI-Helper

Cement kiln dust (CKD) is one of the most important waste materials in the cement industry. The large amount of this material, has encouraged researchers to propose new ways to recycle and reuse it. In this paper, effects of adding cement kiln dust to the ordinary Portland cement, on the physical an...

주제어

참고문헌 (37)

  1. Abdulabbas, Z.H. (2013), "Utilization of cement kiln dust in concrete manufacturing", Jord. J. Civil Eng., 7(1), 2012-2014. 

  2. ACI Committee 211 (1998), Standard Practice for Selecting Proportions for Structural Lightweight Concrete. 

  3. ACI Committee 211 (1991), Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete. 

  4. Al-Harthy, A.S., Taha, R. and Al-Maamary, F. (2003), "Effect of cement kiln dust (CKD) on mortar and concrete mixtures", Constr. Build. Mater., 17(5), 353-360. 

  5. Anwar Hossain, K.M. (2011), "Stabilized soils incorporating combinations of rice husk ash and cement kiln dust", J. Mater. Civil Eng., 23(9), 1320-1327. 

  6. ASTM C127-15 (2015), Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, ASTM International, Pennsylvania, U.S.A. 

  7. ASTM C128-15 (2015), Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate, ASTM International, Pennsylvania, U.S.A. 

  8. ASTM C143/C143M-15a (2015), Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM International, Pennsylvania, U.S.A. 

  9. ASTM C192/C192M-16 (2016), Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, Pennsylvania, U.S.A. 

  10. ASTM C293/C293M-16 (2016), Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading), ASTM International, Pennsylvania, U.S.A. 

  11. ASTM C330/C330M-14 (2014), Standard Specification for Lightweight Aggregates for Structural Concrete, ASTM International, Pennsylvania, U.S.A. 

  12. ASTM C33/C33M-16 (2016), Standard Specification for Concrete Aggregates, ASTM International, Pennsylvania, U.S.A. 

  13. ASTM C39/C39M-16 (2016), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, Pennsylvania, U.S.A. 

  14. ASTM C469/C469M-14 (2014), Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, ASTM International, Pennsylvania, U.S.A. 

  15. ASTM C496/C496M-11 (2004), Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, Pennsylvania, U.S.A. 

  16. ASTM C78/C78M-16 (2016), Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, Pennsylvania, U.S.A. 

  17. ASTM D2419-02 (2002), Test Method for Sand Equivalent Value of Soils and Fine Aggregate, ASTM International, Pennsylvania, U.S.A. 

  18. Baghdadi, Z.A., Fatani, M.N. and Sabban, N.A. (1995), "Soil modification by cement kiln dust", J. Mater. Civil Eng., 7(4), 218-222. 

  19. Bassani, M., Riviera, P.P. and Tefa, L. (2016), "Short-term and long-term effects of cement kiln dust stabilization of construction and demolition waste", J. Mater. Civil Eng., 04016286. 

  20. Batis, G., Katsiamboulas, A., Meletiou, C.A. and Chaniotakis, E. (1996), "Durability of reinforced concrete made with composite cement containing kiln dust", Concrete Environ. Enhan. Prot., 67-72. 

  21. Bhatty, J.I. (1995), Alternative Uses of Cement Kiln Dust, Portland Cement Association. 

  22. Bhatty, M.S.Y. (1985), "Kiln dust cement blends, evaluated", Rock Prod., 88(10), 47-52. 

  23. Bhatty, M.S.Y. (1985), "Use of cement kiln dust in blended cements-alkali-aggregate reaction expansion", World Cement, 16(10), 386-392. 

  24. Bhatty, M.S.Y. (1984), "Use of cement-kiln dust in blended cements", World Cement, 15(4), 126-132. 

  25. Daous, M.A. (2004), "Utilization of cement kiln dust and fly ash in cement blends in Saudi Arabia", Eng. Sci., 15(1). 

  26. Kim, H.K., Hwang, E.A. and Lee, H.K. (2012), "Impacts of metakaolin on lightweight concrete by type of fine aggregate", Constr. Build. Mater., 36, 719-726. 

  27. Maslehuddin, M., Al-Amoudi, O.S.B., Rahman, M.K., Ali, M.R. and Barry, M.S. (2009), "Properties of cement kiln dust concrete", Constr. Build. Mater., 23(6), 2357-2361. 

  28. Maslehuddin, M., Al-Amoudi, O.S.B., Shameem, M., Rehman, M.K. and Ibrahim, M. (2008), "Usage of cement kiln dust in cement products-research review and preliminary investigations", Constr. Build. Mater., 22(12), 2369-2375. 

  29. Morgan, D.S., Novoa, J.I. and Halff, A.H. (1984), "Oil sludge solidification using cement kiln dust", J. Environ. Eng., 110(5), 935-948. 

  30. Najim, K.B., Mahmod, Z.S. and Atea, A.K.M. (2014), "Experimental investigation on using cement kiln dust (CKD) as a cement replacement material in producing modified cement mortar", Constr. Build. Mater., 55, 5-12. 

  31. Reynolds, C.E., Steedman, J.C. and Threlfall, A.J. (2007), Reinforced Concrete Designer's Handbook, CRC Press. 

  32. Sharma, R. and Bansal, P.P. (2016), "Use of different forms of waste plastic in concrete-a review", J. Clean. Prod., 112, 473-482. 

  33. Siddique, R. (2006), "Utilization of cement kiln dust (CKD) in cement mortar and concrete-an overview", Resour. Conserv. Recycl., 48(4), 315-338. 

  34. Siddique, R. and Rajor, A. (2012), "Use of cement kiln dust in cement concrete and its leachate characteristics", Res. Conserv. Recycl., 61, 59-68. 

  35. Taha, R., Al-Rawas, A., Al-Jabri, K., Al-Harthy, A., Hassan, H. and Al-Oraimi, S. (2004), "An overview of waste materials recycling in the sultanate of oman", Res. Conserv. Recycl., 41(4), 293-306. 

  36. Udoeyo, F.F. and Hyee, A. (2002), "Strengths of cement kiln dust concrete", J. Mater. Civil Eng., 14(6), 524-526. 

  37. Wang, M.L. and Ramakrishnan, V. (1990), "Evaluation of blended cement, mortar and concrete made from type III cement and kiln dust", Constr. Build. Mater., 4(2), 78-85. 

저자의 다른 논문 :

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로