최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.26 no.3, 2017년, pp.162 - 167
이선봉 (계명대학교 기계자동차공학과) , 이인규 (한국생산기술연구원 극한가공기술그룹) , 정명식 (한국생산기술연구원 극한가공기술그룹) , 김병민 (부산대학교 기계공학부) , 이상곤
The tensile surface residual stress in the multi-pass drawn wire deteriorates the mechanical properties of the wire. Therefore, the evaluation of the residual stress is very important. Especially, the axial residual stress on the wire surface is the highest. Therefore, the objective of this study wa...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
인발공정의 경우 어떠한 현상이 발생하는가? | 스틸(steel) 와이어의 경우 교량용 케이블, 타이어 코드(tire cord), 스프링(spring) 등에 폭넓게 활용된다[1~6]. 인발공정의 경우, 다이 통 시 다이와 접촉하는 소재 표면부와 중심부의 변형량 차이로 인한 불균일한 변형, 그리고 발생열 등으로 인해 와이어 표면 및 내부에 잔류응력(residual stress)이 발생하게 된다[7]. | |
다단 신선(multi-pass drawing)공정이란 무엇인가? | 다단 신선(multi-pass drawing)공정은 초기 와이어를 여러 개의 다이(die)를 통과시켜 원하는 직경의 와이어를 제조하는 성형공정이다. 스틸(steel) 와이어의 경우 교량용 케이블, 타이어 코드(tire cord), 스프링(spring) 등에 폭넓게 활용된다[1~6]. | |
잔류응력예측이 와이어의 기계적 성질 평가를 위한 데이터로 활용 가능한 이유는 무엇인가? | 와이어 내부 혹은 표면에 인장잔류응력 발생 시 와이어 강도저하 등 기계적 성질을 저하시킨다. 따라서, 잔류응력예측이 가능할 경우 와이어의 기계적 성질 평가를 위한 데이터로 활용 가능하다. |
C. S. Kim, K. S. Hong, M. K. Kim, 2005, Nonlinear Robust Control of a Hydraulic Elevator, Control Eng. Pract., Vol. 13, No. 6, pp. 789-803.
R. S. Chandel, S. R. Bala, 1986, Effect of Welding Parameters and Groove Angle on the Soundness of Root Beads Deposited by the SAW Process, Proc. Of Trends in Welding Research, Gatlinburg, Tennessee, USA, pp. 479-485.
S. Kalpakjian, S. R. Schmid, 1992, Manufacturing Processes for Engineering Materials, Second Ed. Addison-Wesley Publishing Company, New York, USA.
C. F. Yu, Z. L. Xue, W. T. Jin, 2016, Precipitation and Solid Solution of Titanium Carbonitride Inclusions in Hypereutectoid Tire Cord Steel, J. Iron, Steel Res. Int. Vol. 23, No. 4, pp. 338-343.
J. Toribio, M. Lorenzo, D. Vergara, 2016, Hydrogen Embrittlement Susceptibility of Prestressing Steel Wires: the Role of the Cold-drawing Conditions, Procedia Struct. Integrity, Vol. 2, pp. 626-631.
S. K. Lee, D. W. Kim, M. S. Jeong, B. M. Kim, 2012, Evaluation of Axial Surface Residual Stress in 0.82wt% Carbon Steel Wire During Multi-pass Drawing Process Considering Heat Generation, Mater. Des., Vol. 34, pp. 363-371.
J. J. Atienza, M. L. Martinez-Perez, J. Ruiz-Hervias, F. Mompean, M. Garcia-Hernandez, M. Elices, 2005, Residual Stress in Cold Drawn Ferritic Rods, Scr. Mater., Vol. 52, No. 4, pp. 305-309.
H. Overstam, 2006, The Influence of Bearing Geometry on the Residual Stress State in Cold Drawn Wire, Analysed by the FEM, J. Mater. Process. Technol., Vol. 171, No. 3, pp. 446-450.
T. Kuboki, M. Akiyama, Y. Neishi, K. Kuroda, 2000, Effect of Final Drawing with Light Reduction on the Leveling of Residual Stress Distribution in Cold Bar Drawing, Proc. Inst. Mech. Eng. Prat C, Vol. 214, No. 11, pp. 1389-1399.
T. Kuboki, I. Kawakami, M. Neishi, K. Kuroda, M. Akiyama, 2001, A Study on the Influence of Mechanical Properties on the Distribution of Axial Residual Stress after Cold Drawing of Metallic Bars, Mater. Sci. Res. Int., Vol. 7, No. 1, pp. 41-46.
T. Kuboki T, M. Akiyama M, Y. Neishi, K. Kuroda, 2001, Effect of Die Geometry on Residual Stress Level Present after Bar Drawing, Ironmaking Steelmakaking, Vol. 28, No. 1, pp. 65-71.
D. C. Ko, S. K. Lee, W. H. Hwang, B. M. Kim, C. M. Bae, 2007, The Evaluation of Residual Stress on the Drawn Wire using Nano-indentation Test, J. Mater. Process. Technol., Vol. 191, No. 1, pp. 64-67.
J. Toribio, M. Lorenzo, D. Vergara, L. Aguado, 2016, Residual Stress Redistribution Induced by Fatigue in Cold-drawn Prestressing Steel Wires, Constr. Build. Mater., Vol. 114, pp. 317-322.
M. Akiyama, T. Kuboki, 2002, Optimisation of Method for Residual Stresses after Cold Bar Drawing, Ironmaking Steelmaking, Vol. 29, No. 2, pp. 101-106.
Y. H. Lee, D. I. Kwon, 2003, Measurement of Residual Stress Effect by Nanoindenatation on Elastically Strained (100) W, Scr. Mater., Vol. 49, No. 5, pp. 459-465.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.