최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국지진공학회논문집 = Journal of the Earthquake Engineering Society of Korea, v.21 no.4, 2017년, pp.153 - 161
최형석 (부산대학교 지진방재연구센터) , 박동욱 (부산대학교 지진방재연구센터) , 김성완 (부산대학교 지진방재연구센터) , 김재민 (전남대학교 해양토목공학과) , 백은림 (부산대학교 지진방재연구센터)
Liquid storage tank is one of the major infrastructures and generally used to store gases, drinking and utilizing water, dangerous fluids, fire water and so on. According to the recent reports and experiences, the tank structures are damaged in many earthquakes due to their low energy dissipating ca...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
액체저장 탱크의 지진 안전성을 평가하기 위해 무엇을 확인해야하는가 | 액체저장탱크의 지진에 의한 손상은 탱크의 형상, 사용되는 재료, 보관하는 유체의 종류에 따라 다양하나, 주요한 파괴모드는 벽체 하부의 좌굴과 바닥 지지부 앵커의 손상이 대표적이다. 이러한 파괴모드는 지진력에 의한 하중의 크기와 액체저장탱크의 동특성에 의해 결정되게 되므로 액체저장 탱크의 지진 안전성을 평가하기 위하여 고유주파수, 모드형상과 감쇠의 특성을 확인하는 것이 중요하다. | |
액체저장탱크의 지진에 의한 손상 원인은? | 액체저장탱크의 지진에 의한 손상은 탱크의 형상, 사용되는 재료, 보관하는 유체의 종류에 따라 다양하나, 주요한 파괴모드는 벽체 하부의 좌굴과 바닥 지지부 앵커의 손상이 대표적이다. 이러한 파괴모드는 지진력에 의한 하중의 크기와 액체저장탱크의 동특성에 의해 결정되게 되므로 액체저장 탱크의 지진 안전성을 평가하기 위하여 고유주파수, 모드형상과 감쇠의 특성을 확인하는 것이 중요하다. | |
수평으로 작용하는 지진가속도는 무엇에 비례하는가 | Housner [1]의 연구에 따르면, 지진시 액체저장탱크 벽면에 작용하는 수압은 수평으로 작용하는 지진가속도와 수조 구조물 자체의 관성에 의해 발생하는 압력과 이로부터 유발되어 내부 유체의 운동에 의한 동수압(hydrodynamic pressure)으로 나누어진다. 전자는 충격압력 (impulsive pressure)으로 가진되는 가속도에 비례하며, 후자는 대류압력 (convective pressure)으로 충격압력의 영향을 받아 발생하게 되며 유체를 저장하는 용기 형상에 영향을 받는다. 액체저장탱크 내부에 작용하는 이러한 동적 하중의 분포는 각 모드에 따라 탱크의 벽체에 복잡하게 작용하게 된다. |
Housner GW. Dynamic pressure on fluid containers, technical information (tid) document 7024. Chapter 6 and Appendix F, U.S. Atomic Energy Commission. c1963.
American Concrete Institute (ACI). ACI 350: Seismic Design of Liquid-Containing Concrete Structures and Commentary. c2015.
Sweedan AMI, El Damatty A.A. Experimental identification of the vibration modes of liquid-filled conical tanks and validation of a numerical model. Earthquake engineering and structural dynamics. 2003;32:1407-1430.
Amiri M, Sabbagh-Yazdi SR. Influence of roof on dynamic characteristics of dome roof tanks partially filled with liquid. Thin-Walled Structures. 2012;50:56-67.
Virella JC, Godoy LA, Suarez LE. Fundamental modes of tankliquid systems under horizontal motions. Engineering Structures. 2006;28:1450-1461.
Curadelli O, Ambrosini D, Mirasso A, Amani M. Resonant frequencies in an elevated spherical container partially filled with water: FEM and measurement. Journal of Fluids and Structures. 2010;26:148-159.
Sangsari MK, Hosseinzadeh N. Shake table study of impulsive and convective damping coefficients for steel cylindrical tanks and comparison with API 650. Journal of Seismology and Earthquake Engineering. 2014;16(2).
Kolukula SS, Sajish SD, Chellapandi P. Experimental investigation of slosh parametric instability in liquid filled vessel under seismic excitations. Annals of Nuclear Energy. 2015;76.
Park SJ, Won SH, Choi MS, Kim SH, Cheung, JH. Seismic performance evaluation of externally reinforced panel water tank using shaking table tests, EESK J. Earthquake Eng. 2013 July;17(4):151-157.
Kim JK, Park JY. Shaking table test of a rectangular liquid storage tank, Proceeding of Earthquake Engineering. c2000.
American Society of Civil Engineers. ASCE/SEI 7-10: Minimum design loads for buildings and other structures. c2010.
International Code Council (ICC). International, Building Code (IBC). c2009.
American Concrete Institute (ACI). ACI 350.3: Seismic design of liquid containing concrete structures and commentary. c2006.
American Water Works Association (AWWA). AWWA D100: Welded Carbon Steel Tanks for Water Storage. c2011.
American Petroleum Institute (API). API 650: Welded tanks for oil sotrage. c2012.
New Zealand Standard (NZS). NZS 3106: Design of concrete structures for the storage of liquids. c2009.
Eurocode 8: Design of structures for earthquake resistance. c2005.
Korean Standard (KS). KS B 6283: Design requirements for wind load and seismic load of oil storage tanks. c2006.
Nishi H, Yamada M, Zama S, Hatayama K, Sekine K. experimental study on the sloshing behaviour of the floating roof using a real tank. JHPI. 2008;46(1).
Architectural Institute of Japan. Structural Response and Performance for Long Period Seismic Ground Motions. c2007.
Whittaker D, Jury D. Seismic design loads for storage tanks. 12th World Conference on Earthquake Engineering, New Zealand, p. 2000-2376.
International Code Council. International Building Code. c2003.
ACI Committee 371. Guide for the analysis, design, and construction of concrete-pedestal water towers (ACI 371R-98) (Reapproved 2003), American Concrete Institute, Farmington Hills, Mich. c1998.
American Society of Civil Engineers (ASCE). Guidelines for the seismic design of oil and gas pipeline systems, Committee on Gas and Liquid Fuel Lifelines of the Technical Council on Lifeline Earthquake Engineering, Section 7. c1981.
American Society of Civil Engineering (ASCE). Fluid/structure interaction during seismic excitation, Report by Committee on Seismic Analysis. c1984.
American Society of Civil Engineers (ASCE). Minimum design loads for buildings and other structures. ASCE 7-05, Reston, Va. c2005.
ANSI/AWWA. AWWA standard for wire- and strand-wound, circular, prestressed concrete water tanks. ANSI/AWWA D110-95. c1995.
Priestley MJN, Davidson BJ, Honey GD, Hopkins DC, Martin RJ, Ramsey G, Vessey JV, Wood JH. Ed; Seismic Design of Storage Tanks, Recommendations of a Study Group of the New Zealand National Society for Earthquake Engineering, Wellington, New Zealand. c1986.
Korean Standards Association, KS B 6283, Design requirements for wind load and seismic load of oil storage tanks. c2006.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.