최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국동력기계공학회지 = Journal of the korean society for power system engineering, v.21 no.3, 2017년, pp.30 - 36
김부안 (부경대학교 재료공학과) , 강석준 (부경대학교 기계공학협동과정) , 최영민 (부경대학교 재료공학과 대학원) , 문창권 (부경대학교 재료공학과)
Carbon fiber shows excellent heat generation value and thermal efficiency comparing with the metallic materials because of its far infrared-rays and radiant heat. So, high performance and economic steam boiler system for the industry can be manufactured by using the carbon fiber heater. The far infr...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
탄소섬유는 어떠한 특성을 가진 재료인가 | 한편, 탄소섬유(Carbon fiber)는 고온강도, 내열성, 내충격성 및 내약품성이 매우 우수한 재료이다. 그리고 전기 전도성이 있어 금속 도선과 같은 용도로 사용할 수 있다는 특징도 가지고 있다. 탄소섬유의 전기전도율은 일반적으로 결정성에 의존을 하는데 흑연화섬유가 탄소화섬유보다 높은 전기 전도율을 보이는데, 전자가 1. | |
각종 산업 환경에서 사용되는 전기발열체는 어떠한 평가를 받고있는가 | 일반적인 전기발열체의 발열방식은 전자흐름을 방해하는 저항에 의한 것이며, Table 1에 여러 가지 재료의 저항 값을 정리하여 보인다. 그리고 각종 산업 환경에서 사용되는 발열체는 금속열선을 이용한 발열체가 대부분이며, 고온발열 시 부식에 대한 우려와 내마모성, 열효율 및 경제성이 떨어진다는 평가를 받고 있다. | |
일반적인 전기발열체의 발열방식은 무엇인가 | 전기로 발열되는 발열체(이하 전기발열체)의 종류는 발열체를 이루는 주재료와 사용용도, 발열방식 등 여러 가지로 구분할 수 있다. 일반적인 전기발열체의 발열방식은 전자흐름을 방해하는 저항에 의한 것이며, Table 1에 여러 가지 재료의 저항 값을 정리하여 보인다. 그리고 각종 산업 환경에서 사용되는 발열체는 금속열선을 이용한 발열체가 대부분이며, 고온발열 시 부식에 대한 우려와 내마모성, 열효율 및 경제성이 떨어진다는 평가를 받고 있다. |
V. Safarova and J. Gregr, 2010, "Electrical Conductivity Measurement of Fibres and Yarns", International Conference of Czech Republic.
C. T. Hsieh, D. Y. Tzou, Z. S. Huang, C. Y. Lee and J. K. Chang, 2016, "High Performance Infrared Heaters using Carbon Fiber Filaments Decorated with Alumina Layer by Microwave-assisted Method", Journal of The Taiwan Institute of Chemical Engineers, Vol. 59, pp. 521-525.
M. N. Slyadnev, Y. Tanaka, M. Tokeshi, and T Kitamori, 2001, "Photothermal Temperature Control of a Chemical Reaction on a Microchip using an Infrared Diode Laser", Journal of Analytical Chemistry, Vol. 73, pp. 4037-4044.
G. J. Sweeny, P. T. Monaghan, M. T. Brogan and S. F. Cassidy, 1995, "Reduction of Infrared Heating Cycle Time in Processing of Thermoplastic Composites using Computer Modeling", Composites. Part A; Applied Science and Manufacturing, Vol. 6, pp. 255-262.
J. K. Lee and G. H. Choi, 2015, "A Study on the Characteristics of Heating Performance of High-Performance Heat Pump with VI cycle using Re-Heater", Journal of The Korean Society for Power System Engineering, Vol. 19, No. 4, pp. 69-75.
S. S. Jung, S. I. Hwang, J. K. Yeom and S. H. Kim, 2015, "A Study on Characteristics of Spray and Combustion of LPG and CNG about the Effect of Impingement-wall under Direct Injection Condition", Journal of The Korean Society for Power System Engineering, Vol. 19. No. 4, pp. 56-68.
M. T. Brogan and P. F. Monaghan, 1996, "Thermal Simulation of Quartz Tube Infrared Heaters used in the Processing of Thermoplastic Composites", Composites. Part A; Applied Science and Manufacturing, Vol. 27, pp. 301-306.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.