최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國染色加工學會誌 = Textile coloration and finishing, v.29 no.3, 2017년, pp.105 - 114
이정훈 (부산대학교 유기소재시스템공학과) , 이범영 (부산대학교 유기소재시스템공학과) , 이승오 (동명기술(주)) , 최경용 (경은산업(주)) , 고재왕 (한국신발피혁연구원) , 김정수 (한국신발피혁연구원) , 김태경 (경북대학교 섬유시스템공학과) , 이승걸 (부산대학교 유기소재시스템공학과)
High tenacity polyethylene(HTPE) fiber is one of the most important synthetic fibers which possesses outstanding properties such as low density, excellent surface hardness and scratch resistance, superior electrical insulation and low cost. In this study, we dyed high tenacity polyethylene filaments...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
높은 강도의 폴리에틸렌 섬유가 가진 단점은 무엇인가? | 98) 가벼워서 다양한 경량소재로서 많은 연구가 진행되고 있다6). 그러나 높은 강도를 가진 폴리에틸렌 섬유는 결정구조가 조밀하고 긴밀하게 형성되어있어 염색 시 염료가 결정구조 내부로 쉽게 침투되지 못하고 기능기가 없어 염료의 염착이 원활하게 이루어지지 않으므로 염색이 매우 어려운 문제점을 가지고 있기 때문에 기술적인 개선이 필요하다2,3,6-13). | |
올레핀은 무엇인가? | 올레핀은 지방족 불포화 탄화수소로서 C=C결합이 있는 화합물의 총칭으로, 에틸렌과 프로필렌을 단량체로 사용하여 중합하여 폴리에틸렌(PE), 폴리프로필렌(PP) 및 초고분자량 폴리에틸렌(UHMWPE) 등을 생산할 수 있다1-3). 폴리에틸렌 섬유는 우수한 내마모성, 고인장성, 자체윤활성, 균열저항성, 화학안정성 및 낮은 마찰계수 등의 장점을 가지고 있어 방탄조끼, 방탄헬멧 및 군사용 복합소재 등 여러 산업 분야에 응용이 가능하다2-5). | |
본 연구에서 고강도 폴리에틸렌 필라멘트사 염색의 적절한 염료농도가 4%(o.w.f) 정도라고 생각한 이유는 무엇인가? | )로 변화시킨 후 욕비 1: 50이 되도록 염액을 제조한 후 염색기를 이용하여 120℃에서 1시간 염색하여 얻은 고강도 폴리에틸렌 필라멘트사의 염색 사진과 염착량 분석결과를 나타낸 것이다. 솔벤트 염료의 농도가 증가함에 따라 염색성과 염착량이 증가하다 염료농도 4%(o.w.f.) 이상에서는 염착평형 상태를 나타내었다. 염료 농도에 따른 염착량 결과를 바탕으로 염료 종류에 따른 염착량을 계산한 결과 4% 이상의 염료농도일 때 고강도 폴리에틸렌 필라멘트사에 염착된 Solvent Red 27 염착량은 약 0. |
E. P. Kim, Dyeing Method of Ultra High Molecular Weight Polyethylene Fiber and Work Glovesmade from Dyed Ultra High Molecular Weight Polyethylene Fiber using This, KR101287041B1(2013).
T. K. Kim, Dyeing Method of Ultra-High Molecular Weight Polyethylene, KR10-1172860-0000(2012).
Y. A. Son and J. Y. Hwang, DyeingMethod of Polyolefine Based Fiber, KO10-1590732-0000(2016).
S. U. Kim, "Steel Fiber Floating in Water, Ultra High Molecular Weight Polyethylene", DYETEC, Daegu, pp.1-19, 2012.
P. Smith and P. J. Lemstra, Ultra-High-Strength Polyethylene Filaments by Solution Spinning-Drawing, J. of Materials Science, 15(2), 505(1980).
R. Mannhold, G. I. Poda, C. Ostermann, and I. V. Tetko, Calculation of Molecular Lipophilicity: State-of-the-art and Comparison of Log P Methods on More than 96,000 Compounds, J. of Pharmaceutical Sciences, 98, 861(2009).
J. H. Park, J. S. Koh, J. S. Bae, and S. D. Kim, Synthesis and Dyeing Properties of Red Disperse Dyes Derived from Diaminopyridines, Textile Coloration and Finishing, 17, 1(2005).
Tongyi Middle Special Type Xianwei Technolofy Department Limited Company, Sinotex Investment and Development Co, Ltd, An Ultra-High Molecular Weight Polyethylene Fiber Dyeing Method, CN2013-10744307 (2013).
T. Kim, J. Jung, S. Yoon, M. Kim, and Y. Son, The Coloration Properties of Alkyl-Substituted Anthraquinoid Dyes for Pure Polypropylene Fiber, Textile Coloration and Finishing, 19(6), 28(2007).
A. K. Ghose, V. N. Viswanadhan, and J. J. Wendoloski, Prediction of Hydrophobic(Lipophilic) Properties of Small Organic Molecules using Fragmental Methods: An Analysis of ALOGP and CLOGP Methods, The J. of Physical Chemistry A, 102, 3762(1998).
K. R. Cousins, Computer Review of Chem Draw Ultra 12.0, J. of American Chemical Society, 133, 8388(2011).
I. V. Tetko and V. Y. Tanchunk, ALOGPS(HTTP: //WWW. VCCLAB. ORG) is a Free on-Line Program to Predict Lipophilicity and Aqueous Solubility of Chemical Compounds, Abstracts of Papers of the American Chemical Society, pp.U608-U608, 2016.
X. Y. Wang and R. Salovey, Melting of Ultrahigh Molecular Weight Polyethylene, J. of Applied Polymer Science, 34, 593(1987).
E. W. Lee, A Study on the Structure and Mechanical Properties of Isothermally Annealed After Elevated Heating of Drawn PP Filaments, J. of The Korean Society of Industrial Application, 5(4), 361(2002).
S. H. Yoon, T. K. Kim, Y. J. Lim, and K. M. Cho, The Interpretation of Dyeing Behavior of Poly(Trimethylene Terephthalate) Fiber with a Disperse Dye, Textile Coloration and Finishing, 13(4), 249(2001).
K. S. Ko, B. T. Kim, and K. H. Kang, Strength Tests of Imported NYLON 6 and its Variation After Dying, The Korean Society of Fisheries Technology, 6(1), 14(1970).
E. W. Lee, A Study on the Structure and Mechanical Properties of Isothermally Annealed After Elevated Heating of PET Filaments, J. of the Korean Society of Industrial Application, 6(4), 387(2003).
I. Jung, S. Lee, G. Lim, and J. Ryu, Supercritical Fluid Dyeing of Polyester Fiberwith Two Different Dispersion Dyes, Clean Technology, 17, 110(2011).
D. J. Han, Disperse Dyes: A Dye Chemists Perspectives, Aatcc Review, 3(1), 17(2003).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.